KitchenAid 12828134, 2300262 Refrigerator USE, Ensuring Proper Air Circulation, Usingthe Controls

Page 15

REFRIGERATOR USE

Ensuring Proper Air Circulation

In order to ensure proper temperatures, you need to permit airflow between the refrigerator and freezer sections. As shown in the illustration, cool air enters the freezer section through vents in the rear and top. The air flows forward through the freezer section and recirculates under the freezer floor. Cool air enters the refrigerator section through the top, flows down and across shelves to the doors and recirculates to return air vents at the bottom.

Do not block any of these vents with food packages. If the vents are blocked, airflow will be prevented and temperature and moisture problems may occur.

IMPORTANT: Because air circulates between both sections, any odors formed in one section will transfer to the other. You must thoroughly clean both sections to eliminate odors. To prevent odor transfer and drying out of food, wrap or cover foods tightly.

Usingthe Controls

The control center is located at the top front of the refrigerator compartment.

Temperature Controls

For your convenience, your temperature controls are preset at the factory. When you first install your refrigerator, make sure the controls are still set to the recommended set points as shown.

Recommended Settings

The recommended settings should be correct for normal household refrigerator use. The controls are set correctly when milk or juice is as cold as you like and when ice cream is firm.

If the temperature is too warm or too cold in the refrigerator or freezer, first check the air vents to be sure they are not blocked before adjusting the controls. See “Ensuring Proper Air Circulation.”

To Turn Your Refrigerator Off/On:

Press the freezer (+) touch pad repeatedly until “OFF” appears in the freezer display. Allow a few seconds for the refrigerator to shut off. Neither compartment will cool.

Press either the refrigerator or freezer (-) touch pad to turn on the refrigerator.

Adjusting Controls

The REFRIGERATOR control adjusts the refrigerator compartment temperature. The FREEZER control adjusts the freezer compartment temperature.

If you need to adjust the temperature in either the refrigerator or freezer compartment, use the settings listed in the chart as a guide.

To Adjust Set Point Temperatures:

The first touch of the (+) or (-) touch pad displays the current temperature set point. The display will show the set point for approximately 3 seconds, and then return to the actual temperature.

Press the (+) or (-) touch pads until the desired temperature set point is displayed.

NOTE: Except when first turning on the refrigerator, do not adjust either temperature control more than one setting at a time. Wait 24 hours for the temperature to stabilize between adjustments.

CONDITION/REASON:

ADJUSTMENT:

 

 

REFRIGERATOR too warm

Adjust REFRIGERATOR

- Door opened often, large amount

TEMPERATURE Control

1° lower

of food added or room

 

temperature very warm

 

IMPORTANT:

When the power is on, the temperature display shows the actual temperature of the compartment.

Wait 24 hours for your refrigerator to cool completely before adding food. If you add food before the refrigerator has cooled completely, your food may spoil.

NOTE: Adjusting the refrigerator and freezer temperature controls to a colder than recommended setting will not cool the compartments any faster.

FREEZER too warm/ice not made fast enough

-Door opened often, or large amount of food added or very cold room temperature (can’t cycle often enough)

-Heavy ice usage

Adjust FREEZER TEMPERATURE Control 1° lower

15

Image 15 Contents
BOTTOM-MOUNT Refrigerator Table DES Matières Table of ContentsBefore You Throw Away Your Old Refrigerator or Freezer Refrigerator SafetyLocation Requirements Installation InstructionsClean Before Using Unpack the RefrigeratorWater Pressure Electrical RequirementsWater Supply Requirements Recommended Grounding MethodComplete the Installation Connectthe Water SupplyConnect to Water Line Connect to Refrigerator RefrigeratorDoor Base GrilleRemove Drawer Freezer DrawerReverse Door Panel Series Replace Door and HingesFinal Steps Replace DrawerArchitect Series Door Swing Reversal optionalPanel Series Style 2 Front and rear leveling Adjustthe DoorWater System Preparation Style 1 Front levelingFactory TrimKit 20 cu. ft. Refrigerator door Dimensions for Custom Wood PanelsDimensions for Routing Door Panel Side View Normal SoundsUsingthe Controls Refrigerator USEEnsuring Proper Air Circulation Holiday Mode Additional Control Center Features Max CoolOptimIce Feature Door AlarmIce Maker Water DispenserWaterFilter Status Light WaterFiltration SystemCrisper and Crisper Cover Refrigerator ShelvesCrisper HumidityControl Temperature-Controlled DrawerFreezer Features Door FeaturesChanging the Light Bulb CleaningTo Clean Your Refrigerator Refrigerator CareIf You Choose to Turn the Refrigerator Off Before You Leave PowerInterruptionsVacation and MovingCare Changing the Freezer Light BulbTroubleshooting Divider between the two compartments is warm Water flow from the dispenser decreases noticeablyWater leaking from the dispenser Dispenser water is not cool enoughU.S.A Assistance or ServiceAccessories CanadaWater Filter Certifications Application Guidelines/Water Supply Parameters Product Data SheetsONE Year Limited Warranty Kitchenaid Refrigerator WarrantyAvant de jeter votre vieux réfrigérateur ou congélateur Sécurité DU RéfrigérateurEnlèvement des matériaux d’emballage Instructions D’INSTALLATIONEmplacement d’installation Déballage du réfrigérateurPression de leau Méthode recommandée de mise à la terreSpécifications électriques Spécifications de l’alimentation en eauRaccordement au réfrigérateur Achever l’installationRaccordementde la canalisation deau Raccordement à une canalisation d’eauPorte du réfrigérateur Grille de la basePorte du réfrigérateur Remplacement de la porte et des charnièresTiroir du congélateur Enlèvement du tiroirÉtapes finales Réinstallation du tiroirSérie Architect Inversion du sens douverture des portes facultatifGarniture de poignée Série avec panneaux décoratifsStyle 2 Nivellement avant et arrière Ajustementde la portePréparation du système d’eau Style 1 Nivellement avantEntretien des panneaux décoratifs Réinstallation du panneau de porteEnsemble décoratif de l’usine Enlèvement du panneau de la portePanneaux en relief Dimensions pour les panneaux en bois personnalisésSons normaux Panneaux unisPour s’assurer d’une circulation d’air Appropriée Utilisation des commandesCommandes de température Utilisation DU RéfrigérateurPour ajuster les réglages de température Ajustement des réglages de commandeHoliday Mode mode vacances Temp Alarm alarme de dépassement de températureDistributeur d’eau Témoins lumineux de létat du filtre à eau Système de filtration d’eau intérieurMachine à glaçons Caractéristiques DU Réfrigérateur Tablettesdu réfrigérateurBac à légumeset couvercle Tiroir à température contrôlée Réglage de l’humidité dansle bac à légumesCaractéristiques DU Congélateur Caractéristiques DE LA PorteNettoyage Pour enlever et réinstaller le compartiment utilitaireEntretien DU Réfrigérateur CompartimentutilitairePannes de courant Remplacement de l’ampoule d’éclairageRemplacement de lampoule du compartiment de réfrigération Remplacement de lampoule du compartiment de congélationLe plat de dégivrage contient de l’eau DépannageDéménagement Les ampoules n’éclairent pasLe distributeur d’eau ne fonctionne pas bien Le réfrigérateur semble faire trop de bruitLa machine à glaçons ne produit pas de glaçons ou pas assez Mauvais goût, odeur ou couleur grise des glaçonsLa température est trop tiède ’eau coule du distributeur’eau du distributeur n’est pas assez froide La cloison entre les deux sections est tièdeAccessoires Assistance OU ServiceSystème de filtration d’eau intérieur Feuilles DE Données SUR LE ProduitGarantie Limitée DE UN AN Garantie DU Réfrigérateur KitchenaidAll rights reserved 12828134