KitchenAid LI3ZFE/W10321799F installation instructions Range Hood Care, Cleaning

Page 11

RANGE HOOD CARE

Cleaning

IMPORTANT: Clean the hood and grease filters frequently according to the following instructions. Replace grease filters before operating hood.

Exterior Surfaces:

To avoid damage to the exterior surface, do not use steel wool or soap-filled scouring pads.

Always wipe dry to avoid water marks.

Cleaning Method:

Liquid detergent soap and water, or all-purpose cleanser

Wipe with damp soft cloth or nonabrasive sponge, then rinse with clean water and wipe dry.

Metal Grease Filter

The filters should be washed frequently. Place metal filters in dishwasher or hot detergent solution to clean.

Let filter dry thoroughly before replacing it.

Turn off fan and lights. Allow halogen lamp to cool.

1.Remove each filter by pulling the spring release handle and then pulling down the filter.

A

A. Spring release handle

2.Wash metal filters as needed in dishwasher or hot detergent solution.

3.Reinstall the filter by making sure the spring release handles are toward the front. Insert metal grease filter into upper track.

4.Pull the spring release handle down.

5.Push up on metal filter and release handle to latch into place.

6.Repeat steps 1-5 for the other filter.

Non-Vented (Recirculating) Installation Filters

The charcoal filter is not washable. It should last up to 6 months with normal use. Replace with Charcoal Filter Kit Number W10272068.

To Replace Charcoal Filter:

1.Cover the grille that covers the blower motor with the charcoal filter so that the slots on the filter correspond to the pins on the sides of the motor grille.

A BC

A. Charcoal filter

B.Pins

C.Blower motor

2.Turn the charcoal filter clockwise to lock it.

3.Repeat steps 1-2 on the other filter.

Replacing a Halogen Lamp

Turn off the range hood and allow the halogen lamp to cool. To avoid damage or decreasing the life of the new lamp, do not touch lamp with bare fingers. Replace lamp, using tissue or wearing cotton gloves to handle lamp.

If new lights do not operate, make sure the lamps are inserted correctly before calling service.

1.Disconnect power.

2.Use a flat-blade screwdriver and gently pry the light cover loose.

3.Remove the lamp and replace with a 120-volt, 40-watt maximum, halogen lamp made for a G-9 base.

4.Replace the light cover.

5.Reconnect power.

11

Image 11
Contents Island Canopy Range Hood Table DES Matières Table of ContentsRange Hood Safety Tools Needed Installation RequirementsFor Vented Installations, You Will Also Need Tools and PartsLocation Requirements For Mobile Home InstallationsProduct Dimensions Installation DimensionsVenting Requirements Prepare Location Installation InstructionsRange Hood Mounting Screws Installation Electrical RequirementsConnect Vent System Assemble and Install Range HoodComplete Preparation Make Electrical Connection Non-Vented Recirculating InstallationRange Hood USE Install Duct CoversComplete InstallationFan Speed TimerDisplay LightRange Hood Care CleaningMotor Specifications Wiring DiagramCanada Assistance or ServiceAccessories U.S.AThis limited warranty does not cover Kitchenaid Ventilation WarrantyVotre sécurité et celle des autres est très importante Sécurité DE LA Hotte DE CuisinièreImportantes Instructions DE Sécurité Outils et pièces Exigences D’INSTALLATIONExigences d’emplacement Exigences concernant l’évacuation Dimensions du produitDimensions d’installation Installations dans une région à climat froidSpécifications électriques Terminer la préparation Instructions D’INSTALLATIONPréparation de l’emplacement Installation des vis de montage de la hotteRaccordement du circuit d’évacuation Assemblage et installation de la hotteRaccordement électrique Utilisation DE LA Hotte Installation des cache-conduitsAchever l’installation Tableau de commandeVitesse du ventilateur AffichageÉclairage MinuterieNettoyage Entretien DE LA HotteCaractéristiques du moteur Schéma DE CâblageAu Canada Assistance OU ServiceAccessoires W10321799F Garantie DU Système DE Ventilation KitchenaidLa présente garantie limitée ne couvre pas