KitchenAid 2005 Installation Instructions, Venting Options, Prepare Location

Page 6

INSTALLATION INSTRUCTIONS

Venting Options

General venting installation

For vented installations:

Make necessary cuts in the wall for vent fittings.

IMPORTANT: Make sure the vent system is installed before installing range hood.

Rrecirculating installations:

A vent system (not provided) that directs the recirculated air back into the room either through the soffit or through the cabinet top is required. Use Recirculation Kit Part Number 4396565. For ordering information, see “Assistance or Service.”

IMPORTANT: If venting through the cabinet top, do not terminate the exhaust into dead air space such as an attic or enclosed soffit.

When venting through the soffit, assemble the vent system you will use over the exhaust collar, but do not attach the vent system yet.

NOTE: The vent system can exhaust out the front of the soffit or be rotated to exhaust out the side or end of the soffit.

Venting through the soffit

1.Assemble the vent system you will use over the exhaust collar, but do not attach the vent system yet.

NOTE: The vent system can exhaust out the front of the soffit or be rotated to exhaust out the side or end of the soffit.

2.Measure distance “A” (from top of hood to centerline of 6" [15.2 cm] round vent). Mark the distance “A” on soffit.

A

3.Mark and cut a 6" (15.2 cm) round vent opening.

Venting through cabinet top

1.Mark the location where vent cover will be installed in the cabinet top and cut a 6" (15.2 cm) round vent opening for the vent cover.

 

B

C

 

 

A

 

D

 

 

 

 

E

A. Vent system

D. Ceiling or soffit

B. Vent cover

E. Hood

C. Cabinet top

 

IMPORTANT: Do not terminate exhaust into a dead air space such as an attic or enclosed soffit.

Prepare Location

For vented installations, it is recommended that the vent system be installed before hood is installed.

Do not cut a joist or stud unless absolutely necessary. If a joist or stud must be cut, then a supporting frame must be constructed.

Before making cutouts, make sure there is proper clearance within the ceiling or wall for vent fittings.

Check that all the installation parts and the box with filters have been removed from the shipping carton.

Preparation

WARNING

Excessive Weight Hazard

Use two or more people to move and install range. Failure to do so can result in back or other injury.

1.If possible, disconnect power and/or gas supply and move freestanding or slide-in range from cabinet opening to provide easier access to rear wall.

6

Image 6
Contents Hotte D’ASPIRATION DE 30 76,2 CM Table of Contents Table DES Matières Range Hood SafetyTools needed Installation RequirementsTools and Parts Parts suppliedLocation Requirements Installation ClearancesProduct Dimensions Venting RequirementsElectrical Requirements Installation Instructions Venting OptionsPrepare Location Install Range Hood Cut a 1¹⁄₄ 3.2 cm hole for power supply cableInstall Filters Make Electrical ConnectionCheck Operation Range Hood Care CleaningRange Hood USE Range Hood ControlsU.S.A Assistance or ServiceAccessories CanadaKitchenaid Ventilation Warranty ONE Year Limited WarrantyWiring Diagram Sécurité DE LA Hotte D’ASPIRATION Votre sécurité et celle des autres est très importanteConservez CES Instructions Exigences D’INSTALLATION Exigences d’emplacementOutillage et pièces Exigences concernant lévacuation Dégagements de séparation à respecterMéthodes dévacuation Exemple de système de décharge Spécifications électriquesCalcul de la longueur effective du circuit dévacuation Composant Conduit et raccords dia 15,2 cm Coude à Pi 0,8 mInstructions D’INSTALLATION Préparation de lemplacementOptions disponibles pour le circuit Dévacuation Installation de la hotte de cuisinière Installation des filtres Raccordement électriqueContrôle du fonctionnement Entretien DE LA Hotte DE Cuisinière Commandes de la hotte de cuisinièreUtilisation DE LA Hotte DE Cuisinière Lampes de la hotte de cuisinièreAssistance OU Service AccessoiresGarantie DU Système DE Ventilation Kitchenaid Garantie Limitée DE UN ANSchéma DE Câblage 9763380

2005 specifications

In 2005, KitchenAid continued to establish itself as a leader in the kitchen appliance industry, innovating and enhancing its product line to cultivate a blend of style, functionality, and reliability. One of the standout products of this year was the KitchenAid Stand Mixer, which had solidified its reputation as an essential kitchen companion for both amateur cooks and professional chefs alike.

The 2005 model featured a powerful 575-watt motor that provided ample torque, allowing users to effortlessly mix even the thickest doughs. This enhanced motor capability was complemented by 10 different speed settings, enabling cooks to tailor their mixing to the specific needs of various recipes, from whipping cream to kneading bread.

One of the hallmark characteristics of KitchenAid stand mixers was their distinctive and iconic design. The 2005 models maintained a classic aesthetic while offering a wide palette of colors to suit any kitchen décor. Additionally, their durable metal construction promised longevity, making them not only a functional tool but also a stylish addition to countertops.

Another notable feature was the versatility of these mixers. The 2005 lineup had various attachments and accessories available, including a food grinder, pasta maker, and vegetable slicer, all of which expanded the mixer’s utility beyond simple mixing tasks. This adaptability encouraged creativity in the kitchen and promoted the idea of homemade meals.

KitchenAid also emphasized ease of use and convenience in their 2005 models. The tilting head design allowed for easy access to the bowl, simplifying the process of adding ingredients. Moreover, the bowl-lift design provided stability, particularly useful for larger batches and heavier mixtures.

The brand also integrated advanced technologies into their stand mixers, ensuring consistent performance. For instance, the unique planetary mixing action guaranteed thorough mixing by allowing the beater to spin in one direction while the shaft rotated in the opposite direction—ensuring that every ingredient was evenly incorporated.

In summary, KitchenAid's 2005 offerings combined powerful performance, stunning design, and innovative technology, making their appliances a beloved choice among culinary enthusiasts. The focus on durability and versatility transformed the everyday kitchen experience, solidifying KitchenAid's reputation for excellence in the realm of kitchen appliances.