KitchenAid KUDD01DP manual Cancelinga Cycle, Pausing a Cycle, Changing a Cycle or Setting

Cancelinga Cycle

To end a wash cycle in mid-cycle, press the Power button.

Any water in the drawer will be pumped out.

Pausing a Cycle

To pause the drawer during its wash cycle, press START/PAUSE and wait for 3 beeps before opening.

Restart by pressing START/PAUSE.

IMPORTANT: Forcing the drawer open in mid-cycle may cause damage to the dishwasher.

NOTE: If the drawer is operating and a power failure occurs, it will stop. The drawer may not be opened during this time. When the power supply resumes, the drawer will restart in the same part of the wash cycle.

Changing a Cycle or Setting

1.Press the Power button to end the current cycle. Wait for the drawer to drain.

2.When the draining stops, open the drawer.

3.Press the desired wash cycle button to select the desired wash cycle. The lighted indicators will progress until the desired cycle is selected.

OR HI

TEMP

4.Check the detergent dispensers. They must be filled properly for the new cycle. (See “Detergent Use.”)

5.Close the drawer.

6.Press START/PAUSE.

AddingItems Duringa Cycle

You can add an item anytime before the main wash starts. Open the drawer and check the detergent amount. If the detergent is still visible, you can add items.

To add items

1.Press START/PAUSE and wait for 3 beeps before opening the drawer.

2.If the detergent is still visible in the detergent dispenser, you may add the item.

3.Close the drawer firmly.

4.Restart by pressing START/PAUSE.

IMPORTANT: Forcing the drawer open in mid-cycle may cause damage to the dishwasher.

Option Selectionsand Adjustments

After using the dishwasher, you may want to use or adjust some of the preset options available to suit your needs. You can select the Lock button, Control lock, Keylock or Delay Start mode. You can adjust the settings for Rinse Aid, Auto Power, and End of Wash Program beeps.

NOTE: Indicator light colors vary depending on your dishwasher. See following descriptions.

Lock button

The Lock button activates/deactivates the Control lock or the Keylock functions.

Use the Lock button to prevent unintended use of the dishwasher. You can also use either of the lock options to prevent unintended cycle or option changes during a wash cycle.

Control lock

■The Control lock feature disables all of the buttons on the dishwasher.

1.To activate, press and hold the Lock button until you hear 1 beep (about 3 seconds).

2.To cancel, press and hold the Lock button until the light disappears.

Keylock

■The Keylock feature locks the drawer closed and disables the dishwasher and all buttons.

1.To activate, press and hold the Lock button until you hear the 2 beeps (about 5 seconds).

2.To cancel, press and hold the Lock button until the light disappears.

12