OPERATINGCMD+ SHIFTHECLICOFFEEKTO CHANGEBREWERCOPY
Brewing coffee
1 | After selecting the number of cups you |
want to brew, and the strength of the | |
| coffee you want to brew, press the |
| BREW button. |
2 | The Coffee Brewer will heat all the |
water needed to brew at the beginning | |
| of the cycle. You will see the Heating |
| indicator light up during this segment |
| of the cycle. This process takes |
| approximately 6 minutes for 8 cups |
| of coffee. |
English
NOTE: If you wish to cancel the Brew cycle at any time, press the BREW button.
3 | After all the water is heated, the Coffee |
Brewer will begin to alternately shower | |
| the grounds with water, and allow the |
| coffee to steep. This happens in stages |
| until the cycle is over, and you will see |
| the Pouring and Steeping indicators |
| alternately light up during this segment |
| of the cycle. |
4 | When the cycle is complete, the Enjoy |
indicator will light up and 3 beeps will | |
| sound. The Warming plate will then |
| keep the coffee at optimum temperature |
| for 1 hour after brewing. However, for |
| best results, it is recommended that |
| coffee is consumed within 30 minutes |
| after brewing. To cancel the Warm cycle |
| at any time, press the BREW button. |
HELPFUL TIP: It is recommended to allow the brewing cycle to complete for the selected number of cups prior to tasting to extract the maximum flavor from the pour over brewing method.
13