Siemens HE2224(U, HE2528U, C), HE2425(U installation instructions Installation Procedure

Page 10

 

 

 

 

 

Installation

 

For installations other than those in Canada, install the strain relief and connect

 

the range cord (or wire conductors) as described in the following steps.

 

Table 1: Electrical Specifications

 

 

 

 

Check data plate for kW rating. Reference kW rating in table to determine

 

amperage requirements.

 

 

 

 

 

 

 

 

 

kW Rating

AMPS Required

 

 

 

 

 

 

 

At 120/240 Volts:

At 120/208 Volts:

US Models:

 

Canadian Models:

 

 

 

 

 

 

12.3

9.2

40 or 50*

 

 

 

 

 

 

12.6

9.5

40 or 50*

 

50

 

 

 

 

 

 

 

13.5

10.2

 

50

 

 

 

 

 

 

 

* Varies by location. Refer to local electric code.

Installation Procedure

 

 

 

 

Installation Tips

• Tape warming drawer or storage drawer shut to keep it from opening while

 

installing the range.

 

 

 

•During installation, place a portion of the box or a piece of cloth under the range to protect floors.

•To make range lighter and easier to handle, remove door (see instructions in Use and Care manual).

Install Ventilation

We strongly recommend the installation of a ventilation hood above this range.

 

For most kitchens a certified hood rating of not less than 300 CFM is recom-

 

mended. The range hood must be installed according to instructions furnished

 

with the hood.

Prepare Walls and Floor

Seal any holes in the walls or floor. Remove any obstructions (extra electrical or

 

gas connections, etc.) so that range will rest against wall properly.

Prepare Range

Place range in front of cabinets where it is to be installed. Remove any packaging.

Install Strain Relief

WARNING:

 

The strain relief provided with your range cord must be properly

 

installed.

 

Place strain relief in knockout below terminal block. See Figure 4: Electrical Con-

 

nection and Strain Relief Knockout Panel Locations. Feed range cord through

 

hole and strain relief up to terminal block. Allow for slack in the cord between the

 

strain relief and terminal block. Once cord length/ slack has been adjusted, attach

 

strain relief per instructions included with strain relief.

 

Tip:

 

The knockout panel (below the terminal block) can be removed from

 

the range to install the strain relief: Remove panel from range, install

 

strain relief in panel and reattach. DO NOT remove entire range back

 

panel.

English 6

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Siemens Electric Range with threeD Surround Convection Page Table of Contents Page Important Safety Instructions SafetyImportant Safety Instructions Do not Lift Range by Door Handle Power Requirements and ElectricalGrounding Instructions Parts Included InstallationBefore You Begin Cabinet RequirementsCooktop Clearances Verify that wiring inside house is adequate Verify that wiring to house is adequateGeneral Information Installation Procedure Connect Electric Four Wire Range Cord Connection Recommended Method Grounding OptionsFour Wire Range Cord Connection Ground Strap and Wire Terminal Block Four Wire Flexible Conduit Connec- tion Appropriate Torque Levels for Aluminum or Copper WireThree Wire Flexible Conduit Con- nection Completed Four Wire Flexible Conduit ConnectionAttach anti-tip bracket to floor Anti-tip BracketRange Tipping Hazard Adjusting the Leg Support Page Service Product Data PlatePage Table des matières Instructions de sécurité importantes SécuritéInstructions de sécurité importantes Codes de sécurité et données tech- niquesExigences d’alimentation et instruc NE PAS Soulever L’APPAREIL PAR LA PoignéeTions de mise à la terre Outils et pièces néces- saires Avant de commencerPièces comprises Dégagements requis Dégagements de la surface de cuisson’assurer que le câblage à la résidence est adéquat Exigences électriquesGénéralités ’assurer que le câblage intérieur est adéquatProcédure dinstallation Données techniques électriquesConnexion électrique Connexion du cordon à 4 fils méth- ode recommandée Connexion à 4 fils conducteur de terre et filConnexion à 4 fils suite Connexion de conduit flexible à 4 fils Connexion à 3 filsDégainer le fil Niveau de force approprié pour fil aluminium ou cuivreConnexion de conduit flexible à 3 fils Anti bascule Installer la fixation anti bascule au plancherRisque DE Bascule DE LA Cuisinière Compléter l’installation Réglage des piedsAvant deffectuer un appel de service Plaque signalétiqueContenidos Códigos de seguridad y especifica- ciones SeguridadInstrucciones Importantes de Seguridad Requerimientos de seguridad delNunca Levante LA Estufa POR LA Agarradera DE LA Puerta Partes incluidas InstalaciónAntes de comenzar Requerimientos para los gabinetesEspacios libres requeri- dos Espacios libres para la estufaVerificar que el cableado a la casa sea el adecuado Requerimientos eléctri- cosInformación general Verificar que el cableado dentro de la casa sea el adecuadoInstalar la ventilación Tabla 1 Especificaciones eléctricasConsejos de instalación Preparar las paredes y los pisosConexión eléctrica Conexión del cable con cuatro hilos método recomendado Conexión del cable de 4 hilos Tira y cable de tierraConexión del cable con tres hilos CentralConexión con cable flexible de cua- tro hilos Conexión de 3 hilosPelar el cable Niveles correctos de torque para cable de aluminio o cobreConexión con cable flexible de tres hilos Fijar el soporte antivolcadura al piso AntivolcaduraRiesgo DE Volcadura DE LA Estufa Terminar la instalación Ajustar los soportes de las patasAntes de llamar al servicio ServicioPlaca con datos del pro- ducto Page

HE2224(U, HE2528U, C), HE2425(U specifications

The Siemens HE2224(U, HE2528U, C) and HE2425(U) models are a testament to Siemens' commitment to innovation and efficiency in the world of electrical engineering and automation. These units offer a range of advanced features, ensuring versatility and reliability for various applications.

The HE2224(U) series is designed to deliver exceptional performance and efficiency. One of its main features is the integration of advanced communication protocols, allowing for seamless connectivity and control within an automated system. This ensures efficient data exchange and remote monitoring, making it ideal for industries seeking to optimize their processes.

Additionally, the HE2528U model is equipped with a powerful processing unit that can handle complex algorithms and real-time data analyses. This capability significantly enhances operational speed and accuracy, allowing businesses to make informed decisions quickly and efficiently. The device’s robust design also reflects Siemens' dedication to durability and longevity, ensuring that it can withstand challenging environmental conditions.

The HE2425(U) model stands out with its emphasis on energy efficiency. It incorporates cutting-edge technologies that minimize power consumption without compromising performance. This focus on sustainability aligns with global efforts to reduce energy usage and carbon footprints in industrial operations.

These models feature user-friendly interfaces that simplify programming and operation. Enhanced visualization capabilities allow users to easily monitor system performance and make adjustments as needed. This accessibility is crucial for industries that require quick adaptations to changing conditions or requirements.

Safety is another critical aspect of these units. Siemens has integrated multiple safety features, including overload protection and fault detection systems, to safeguard both equipment and personnel. This commitment to safety enhances the overall reliability of the systems, making them suitable for various industrial applications.

In summary, the Siemens HE2224(U, HE2528U, C) and HE2425(U) models represent the forefront of technological advancements in industrial automation. With their robust performance, energy efficiency, advanced communication capabilities, and focus on safety, these units provide remarkable solutions for businesses aiming to enhance productivity while prioritizing sustainability. Siemens continues to set the benchmark in electrical engineering, ensuring that their products meet the evolving needs of various industries.
Top Page Image Contents