Siemens C), HE2528U Anti-tip Bracket, Attach anti-tip bracket to floor, Range Tipping Hazard

Installation

8.Insert stripped end of WHITE wire into the CENTER lug on TOP of the ground strap. Secure the clamping screw.

lug

clamping screw

wire

Figure 9: Attaching Wire to Terminal Lug

10.Insert stripped end of RED wire into the LEFT lug. Secure clamping screw.

11.Insert stripped end of BLACK wire into the RIGHT lug. Secure clamping screw.

12.Tighten each clamping screw with the appropriate torque. See Table 3.

Table 3: Appropriate Torque Levels for Aluminum or Copper Wire

Gauge	Torque (in./lbs.)	Torque (Nm)
6	35	3.95
8	25	2.82

13.Properly secure flexible conduit at knockout panel on range and at supply side junction box. The wiring is now complete.

green ground screw

Figure 14: Completed Three Wire Flexible Conduit Connection

Note:

DO NOT plug in range at this time.

Anti-tip Bracket

Attach anti-tip bracket to floor WARNING

RANGE TIPPING HAZARD

All ranges can tip and injury could result. To prevent accidental tipping of the range, attach it to the floor by installing the Anti-Tip Device sup- plied.

English 13