Sunbeam BM7800 manual Using your Quantum SmartBake, Removing the baking pan, Adding Ingredients

Using your Quantum SmartBake.

Before using your Quantum SmartBake for the first time

We recommend that you remove the baking pan (instructions to do so are explained below) and wipe over the bread pan and kneading blade with a damp cloth and dry thoroughly.

Do not immerse the bread pan in water unless necessary. Do not use harsh abrasive cleaners as they may damage the non-stick surface. Do not place any parts of your breadmaker in the dishwasher.

Removing the baking pan.

Open the lid of your Quantum SmartBake and remove the baking pan by taking hold of the baking pan handle and lifting it straight up.

It is a good idea to remove the baking pan before adding ingredients so that no ingredients are spilt into the baking chamber and onto the element.

Adding Ingredients

We recommend that you add the ingredients into the bread pan in the order listed. All ingredients should be at room temperature and measured carefully.

Replacing the baking pan

To return the baking pan to the baking chamber simply position the baking pan into the baking chamber and push down until it slots into position.

Lay the handle flat toward the side of the bread pan.

Close the lid securely, plug the machine into a 230-240 volt AC power outlet and turn the power ON.

Note: When the machine is first plugged in, the LCD window will beep and flash “0.00” until a program is selected.

13