Programming your Quantum SmartBake - cont
4.Once you have finished programming, you can either save your recipe now, by simply pressing the SAVE button, the BOOK icon (
) will stop flashing and the control panel will beep 3 times.
Your recipe has now been saved into one of the 8 Favourite Recipe slots.
OR
You can test your recipe first, without yet saving it by simply pressing START. If you then want to save the recipe you must ensure that you press SAVE before the end of the KEEP WARM (
) mode.
Note: You can not save the recipe once the Keep Warm cycle is complete.
5.To cancel the programming process at any stage simple press the CANCEL button.
Reprogramming a Favourite Recipe
You can make changes to, or replace any of your saved Favourite Recipes at any time.
1.Select the recipe you wish to modify by pressing
the BOOK icon (
) button. This will allow you to scroll through Favourite Recipes
(1) to (8).
2.To commence programming press the MODIFY button for 2 seconds.
The control panel will beep once and the first stage of the breadmaking cycle - Preheat (
) will flash.
You can now follow the instructions as given in the programming section, steps 3 - 5.
Modifying Recipes During the
Baking Process
The SmartBake Technology in this breadmaker allows you complete baking freedom. You may even modify a recipe as it cooks. Simply push the MODIFY button, this will pause the machine, and use the +/- (▼/▲) buttons to modify the current stage. You will need to push the MODIFY button again to resume the breadmaking cycle.
Previewing Menus and Favourite Recipes
1.You can preview any program prior to beginning the breadmaking process by pressing the MODIFY button. Continuously press the MODIFY button to scroll through all stages.
2.To exit from previewing a Menu or Favourite Recipes press the CANCEL button. This will automatically return you to the beginning of the current Menu or Favourite Recipes.
20