Sunbeam BM7800 manual Baking Progress Monitor

The Control Panel - cont.

Start/Pause

Press the START/PAUSE button to commence selected setting or begin timer countdown for delay timer.

If you would like to pause the current breadmaking cycle all you need to do is press the START/PAUSE button. The time will flash indicating that you are in ‘PAUSE’ mode. To resume the baking cycle you must press the button again.

To stop the operation or cancel a timer setting, press and hold for 2-3 seconds until you hear a beep.

Start/Pa

Battery

When the breadmaker loses power the battery icon ( ) will be displayed. This indicates that the machine is relying on an internal battery supply.

Baking Progress Monitor.

The baking progress monitor is located at the top of the LCD screen. The monitor displays each of the stages of the breadmaking cycle and under each icon are a series of boxes. During the breadmaking cycle one of these boxes is blacked out to indicate which stage of the cycle you are in.

Pre-Heat

The pre-heat feature is part of the Wheat and Jam settings only. During the pre-heat stage the Quantum SmartBake is pre-warming the ingredients before the first kneading stage commences.

Knead

Signals that the loaf is in either of the 2 kneading or the 2 knock-down stages.

Rise

Signals that the loaf is in one of the 3 rising stages. During the different rise stages a low temperature is used which assists the rising process.

Bake

Signals that the loaf is in the bake stage. This is the final stage of the breadmaking cycle at which a higher temperature is used to bake the bread.

Keep Warm

The Keep Warm feature starts when the bread has completed the baking stage and keeps the bread warm for up to 60 minutes.

Baking Progess Monitor

9