Make Electrical Connection
WARNING
Fire Hazard
Electrically ground the blower.
Use copper wire.
Connect ground wire to green ground screw in terminal box.
Failure to do so can result in death, fire, or electrical shock.
Direct Wire Installation
1.Connect the white wire of the home power supply cable with the white wire in the range hood using a UL listed wire connector.
B
A
F
C
D
E
A. White wires
B. Black wires
C. Green ground screw
D. Ground wire
E. UL listed or CSA approved strain relief
F. UL listed wire connector
2.Connect the black wire of the home power supply cable with the black wire in the range hood using a UL listed wire connector.
3.Connect ground wire (green or bare) of home power supply cable to the green ground screw in the terminal box.
4.Tighten strain relief screws.
5.Install the terminal box cover.
6.Reconnect power.
Complete Installation
Install 40-watt (max) type A-15 appliance light bulbs.
1.Squeeze both sides of the lens cover to remove the tabs from the slots in the range hood and remove lens cover.
A
B
C
D
A. Light bulb socket
B. Lens cover
C. Lens cover slots
D. Lens cover tabs
2.Screw two
3.Reinstall lens cover by squeezing both sides of the lens cover and inserting the tabs into the slots in the range hood.
Install Charcoal filter
For non-vented (recirculating) installations:
Install charcoal filter pad Part Number 4396388 available from your dealer. See “Range Hood Care” section for installation instructions.
Check Range Hood Operation
1.Check light operation by turning the light knob.
2.Check operation of fan by turning the fan knob.
3.If the range hood does not operate, check to see whether a circuit breaker has tripped or a house fuse has blown.
4.NOTE: To get the most efficient use from your new range hood, read the “Range Hood Use” section.
11