Denon AVC-A1HD DPOA Setting AVP-A1HD, Volume Limit, Power On Level, Link Check, Mute Level

sXLR Out Polarity AVP-A1HD

Set to switch the XLR pre-out terminal polarity.

[Selectable channels]
Front L	Front R			Center	Surround L			Surround R
Surround Back L				Surround Back R			Front Height L
Front Height R			Front Wide L			Front Wide R			Subwoofer 1
Subwoofer 2		Subwoofer 3
								q GROUND
[Selectable items]				XLR
								w HOT

dPOA Setting AVP-A1HD

Set when connecting the receiver to a POA-A1HD.

POA LINK

Set when connecting the receiver to a POA-A1HD through a CONTROL LINK.

[Selectable items] OFF ON (Single) ON (Dual)

POA 1/POA 2

Set POA-A1HD for which the MODE select switch is set to “1” or “2”.

sVolume Control	AVC-A1HD
fVolume Control	AVP-A1HD

Set the MAIN ZONE volume setting.

Volume Limit

Make a setting for maximum volume.

[Selectable items] OFF –20dB –10dB 0dB

Power On Level

This sets the volume set when the MAIN ZONE’s power is turned on.

Getting Started Connections Setup Other

	e COLD
XLR (INV)	q GROUND
	w COLD
	e HOT

See the POA-A1HD operating instructions.

nInput Selector

Select the setup channel.

[Selectable items] L1 R1 L2 R2 L3 R3

L4 R4 L5 R5

Select the connector input to be used for each channel.

[Selectable items]	RCA	XLR	OFF
nPower Amp
Select the setup channel.
[Selectable items]	L1/L2	L3/L4	L5/R5	R1/R2	R3/R4

Set the power amp usage for each channel.

[Selectable items] NORMAL BI-AMP BRIDGE (BTL)

LINK Check

Check CONTROL LINK.

[Selectable items] Last – – –dB –80dB ~ 18dB

Mute Level

This sets the amount of attenuation of the volume when the mute mode is set in the MAIN ZONE.

[Selectable items] Full –40dB –20dB

dSource Delete	AVC-A1HD
gSource Delete	AVP-A1HD

Remove input sources that are not used from the display.

[Selectable items] ON Delete

NOTE

•Input sources being used in the various zones cannot be deleted.

•Input sources set to “Delete” cannot be selected from GUI menu “Source Select” or using the SOURCE SELECT knob on the main unit or SOURCE SELECT button on the remote control unit.

Operations Multi-Zone Information Troubleshooting Specifications

30