Denon AVP-A1HD, AVC-A1HD owner manual Changed Functions, Deleted Functions

Page 4

Changed Functions

Support for front height speakers and front wide speakers

Front height or front wide channels can be played back through the FH/FW/AMP ASSIGN-2 speaker terminals and the PRE OUT FH/FW terminals. This enables you to enjoy a maximum 9.3 channel surround playback.

Audyssey MultEQ® XT 32

Audyssey MultEQ® corrects both time and frequency response problems in the listening area so that every listener can enjoy music and movie with the optimum sounds. It performs a fully automated surround system setup. The unit is equipped Audyssey MultEQ® XT 32 that can correct much higher details, particularly in the bass range of the speakers. The high resolution correction reproduces much clearer surround sound.

Direct Mode function (Multi-channel)

When multi-channel signals are input, the signals are output directly without being mixed-down to 2 channels.

Surround Back function

When surround back speakers are used and a surround back signal is recorded in the input signal, audio is output automatically from the surround back speakers.

Web Control function

When this product is upgraded, previously saved contents cannot be called.

After completing the upgrade, reconfigure the settings.

For details on the web control operating procedures, see mpage 61

AVC-A1HD , mpage 63 AVP-A1HD .

Deleted Functions

Surround B speakers unsupported

As front height speakers and front wide speakers are now supported by this upgrade, surround B speakers can no longer be used.

Audyssey MultEQ® XT

As Audyssey MultEQ® XT 32 is supported by this upgrade, Audyssey MultEQ® XT is deleted.

DTS Neo:6

As DTS Neo:X is supported by this upgrade, DTS Neo:6 is deleted.

Night Mode function

In this upgrade, the night mode in which the volume can be set to low level for listening at nighttime is deleted. The same effect can be obtained from setting “Dynamic EQ®” and “Dynamic Volume®” in the GUI menu (vpage 41) to “ON”.

Mic Select function

The Mic Select function is deleted when the product is upgraded. Only the supplied setup microphone (DM-A409) can be used.

For details on the items that are added/changed/deleted from the GUI menu, see “GUI Menu Map” (vpage 10, 11).

Getting Started Connections Setup Other Operations Multi-Zone Information Troubleshooting Specifications

Image 4

Contents Symbols used in this manual GOriginal versionHContents Functions that are added/changed/deleted by this upgrade AccessoriesGetting Started Additional functionsChanged Functions Deleted FunctionsChanges to the Panel Display Front PanelRear Panel GWith the door openHPart Names and Functions DisplaySpeaker Installation Remote Control UnitMain remote control unit RC-1067 ConnectionsSpeaker Connections Left R Right Subwoofer with built-in amplifier This unit SubwooferBuilt-in amplifier This unitExternal Power Amplifier Power amplifierTelevision setting that converts 2D video to 3D video off Over the playback videoGUI Menu Operations GUI Menu MapSource Select vmpage 44 ~ InformationVpage 23 ~ 34, mpage 31, 34 ~ 38 Auto Setup About setup microphone placementAbout the main listening position *M SBLBefore starting Auto Setup Set up the subwooferWhen using a subwoofer with a direct mode When using a subwoofer without a direct modeAAuto Setup Auto SetupPreparation Start Auto Setup Configuring Various SettingsReturn Measuring the subwoofer volume level When measuring has stoppedDetection & Measurement main EnterAdjusting the subwoofer volume level MainvpageMeasurement 2nd 8th CalculationSave the measurement results Check StoreProceed to Store vpage Auto Setup is complete FinishError messages Examples Error details MeasuresDirect Mode SOptionDParameter Check OFFSpeaker Setup Manual SetupASpeaker Configuration Distance SSubwoofer SetupFChannel Level HTHX Audio Setup GCrossover FrequencyAEXT. in Setup Audio SetupS2ch Direct/Stereo DAuto Surround Mode FManual EQOption Setup AVC-A1HD Option Setup AVP-A1HD Assign ModeAmp Assign AVC-A1HD Extension ChannelPre-out Assign DPOA Setting AVP-A1HD Volume LimitPower On Level Link CheckMaster Volume ScreensaverWall Paper FormatSetting with Respect to the Zone Setting with Respect to the Input SourceSetting with Respect to the Surround Mode Setting with Respect to the Monitor⋅ Restorer A4Dimmer AVC-A1HD A6Dimmer AVP-A1HDSelectable items ZONE4 Select Rec Select Selectable items Bright Dim DarkCheck for Update UpgradeUpgrade Status Add New FeatureSurround Mode Operating from the main unit or main remote control unitSurround Playback of 2-channel Sources Playing Multi-channel Sources Dolby Digital, DTS, etcWhen using a surround back speaker When using a front height speakerWhen using a front wide speaker Standard PlaybackStandard Parameters AudioASurround Parameters DecoderDimension Delay TimeCenter Gain PanoramaSTone DAudyssey Settings MultEQ XTDynamic EQ Reference Level OffsetDynamic Volume FA-DSX SoundstageAudyssey DSX Stage WidthRestorer HAudio DelayAbout the Restorer function Stage HeightInformation StatusQuick Select AMAIN ZoneOther Operations and Functions Playback of Blu-ray Disc HD audio using Denon Link 4thConvenient Functions Multi-Zone Settings with the Amp Assign Function Amp Assign / Multi-Zone Connections and Operations AVC-A1HDSetting Power amps to connect to the pre-out terminalsF9.1-channel playback Audio output speakersF9.1-channel playback FMulti-zone playback ON/OFF buttonChannel playback + ZONE3 stereo playback Press ZONE3SBR SBL Z3R ZONE3 OFF ZONE3 onON/OFF or ZONE3 ON/OFFFR FL SR SL SBR SBL ZONE2 on ZONE3 OFF ZONE2 OFF ZONE3 onFront Surr AMP Assign FH/FWButton ZONE2 OFF ZONE3 on ZONE2 on ZONE3 OFFZONE2 OFF ZONE3 on ZONE2 on ZONE3 OFF ZONE3 OFF S Amp Assign mode Bi-Wiring Switching with other modes not possibleBi-Wiring Amp Assign mode Bi & ZONE2 Bi-WiringSBL Z2R Bi & ZONE2Amp Assign mode Bi & ZONE3 SBL Z3RAmp Assign mode Bi & Zone Mono Bi & Zone MonoZONE3 OFF ZONE2 OFF ZONE3 on ZONE2 onAmp Assign mode Bi-Amp Speaker to connect Bi-AmpSwitching·················Surround Mode switching Amp Assign mode 2CH Bi-WiringPress Standard Press Direct Stereo button Press StandardR L R L 2ch Bi-Amp Press DIRECT/ Stereo button2ch Bi-Amp Amp Assign mode Front Wide Amp Assign mode Front HeightBack Height Front Surr SURR.BACK AMP Assign FH/FW Free AssignAbout Speaker Installation Other InformationAbout Denon Link 4th GSpeaker abbreviationsHSurround Dolby SurroundDTS Surround AudysseySurround Modes and Parameters Dolby HeadphoneDSD Direct DSD Multi Direct Multi CH Direct Stereo EXT. Multi CHWide Screen DTS NeoxPCM DTS-HD PCM DTS-HD Dolby Dolby Digital Standard Multi CH Relationship Between Amp Assign Setting and Speaker Output Multi-Zone Power On/OffStereo or Direct 2ch Mode SettingGAudioH Symptom Cause TroubleshootingSymptom Cause Countermeasure Symptom Cause Countermeasure No specifications are changed by this upgrade SpecificationsNAudio section Holdings Inc