Specifications
No specifications are changed by this upgrade.
When this unit is upgraded, the “Audio section” contents are changed.
To check items related to “Audio section”, refer to this version of the Owner's
Manual instead of the “Original version”.
nAudio section
• Power amplifier
Rated output: | Front: |
|
| 150 W + 150 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.) | |
| 170 W + 170 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) | |
| Center: |
|
| 150 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.) | |
| 170 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) | |
| Surround: |
|
| 150 W + 150 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.) | |
| 170 W + 170 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) | |
| Surround back/Front height/Front wide: | |
| 150 W + 150 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.) | |
| 170 W + 170 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) | |
Dynamic power: | 200 W x 2ch (8 Ω/ohms) |
|
| 340 W x 2ch (4 Ω/ohms) |
|
Output connectors: | Front, Center, Surround, Surround back, | |
| Front height, Front wide | 6 ~ 16 Ω/ohms |
• Analog |
|
|
Input sensitivity / Input impedance: | 200 mV / 47 kΩ/kohms |
|
Frequency response: | 10 Hz ~ 100 kHz — +1, | |
S/N: | 102 dB | |
Distortion: | 0.005 % (20 Hz ~ 20 kHz) (DIRECT mode) | |
Rated output: | 1.2 V |
|
• Digital |
|
|
D/A output: | Rated output — 2 V (at 0 dB playback) | |
| Total harmonic distortion — 0.005 % (1 kHz, at 0 dB) | |
| Dynamic range — 110 dB |
|
Digital input: | Format — Digital audio interface | |
• Phono equalizer (PHONO input — REC OUT) |
| |
Input sensitivity: | 2.5 mV |
|
RIAA deviation: | ±1 dB (20 Hz to 20 kHz) |
|
S/N: | 74 dB (A weighting, with 5 mV input) | |
Rated output: | 150 mV |
|
Distortion factor: | 0.03 % (1 kHz, 3 V) |
|
bFor purposes of improvement, specifications and design are subject to change without notice.
Getting Started Connections Setup Other Operations
72