Denon A4Dimmer AVC-A1HD A6Dimmer AVP-A1HD, Selectable items ZONE4 Select Rec Select

A1Digital Out	AVC-A1HD
A3Digital Out	AVP-A1HD
Set usage of OPT4 OUT.

[Selectable items] ZONE4 Select Rec Select

NOTE

The ZONE4 operations cannot be performed when set to “Rec Select”.

A2Remote ID	AVC-A1HD
A4Remote ID	AVP-A1HD

Set remote control ID.

Match the ID setting of the remote control unit and the receiver.

[Selectable items] 1 2 3 4

•When changing the remote ID, also change the AMP, iPod and NET/DTU modes of the main remote control unit at the same time

(vmpage 70 AVC-A1HD , mpage 72 AVP-A1HD).

• When changing the remote ID, also change the sub remote control unit at the same time (vmpage 75 AVC-A1HD , mpage 77

AVP-A1HD ).

A3232C Port (1)	AVC-A1HD
A5232C Port (1)	AVP-A1HD

Set when external controller or 2-way remote control unit (RC- 7000CI and RC-7001RCI, sold separately) is connected.

[Selectable items]

Serial Control : Set when using an external controller.

2Way Remote : Set when using a 2-way remote control unit.

NOTE

In order to use a 2-way remote control (RC-7000CI or RC-7001RCI, sold separately), set “2Way Remote”. In this case, the RS-232C terminal cannot be used for an external controller.

A4Dimmer AVC-A1HD

A6Dimmer AVP-A1HD

Adjust display brightness of the receiver.

[Selectable items] Bright Dim Dark OFF

Operating from the main unit

Press the DIMMER button.

Bright Dim

OFF Dark

A5Setup Lock	AVC-A1HD
A7Setup Lock	AVP-A1HD

Protect settings from inadvertent change.

[Selectable items] ON OFF

•When “Setup Lock” is set to “ON”, the settings listed below can no longer be changed. Also, “SETUP LOCKED!” is displayed if you attempt to operate related buttons.

⋅GUI menu operations

⋅RESTORER

⋅Parameters

⋅MultEQ® XT 32

⋅Channel Level

⋅Audio Delay

•To cancel the setting, press the MENU button to re-display the “Setup Lock” screen, then change the setting to “OFF”.

A6Maintenance Mode	AVC-A1HD
A8Maintenance Mode	AVP-A1HD

This sets the function for maintenance by a DENON service person or installer. (For professional use only.)

This function allows a DENON service person or installer to check the unit’s status and make settings via the Internet.

NOTE

Only use this function if so instructed by a DENON service person or installer.

Getting Started Connections Setup Other Operations Multi-Zone Information Troubleshooting Specifications

33