Denon AVC-A1HD, AVP-A1HD owner manual SSubwoofer Setup, Distance, FChannel Level

sSubwoofer Setup

Select subwoofer output configuration and bass signal for

playback.

Configuration

Select number of subwoofers and configuration.

[Selectable items]
1SP	2SP L/R	2SP MIX		3SP L/R/LFE		3SP MIX
Subwoofer Configuration					Subwoofer Connector
1SP						SW1
2SP L/R				L		SW1
				R		SW2
2SP MIX			1			SW1
			2			SW2
				L		SW1
3SP L/R/LFE				R		SW2
				LFE		SW3
			1			SW1
3SP MIX			2			SW2

Mode

Select bass signal for playing with the subwoofer.

[Selectable items] LFE–THX– LFE+Main

•THX recommends LFE–THX– mode so that bass interference is less likely to occur in the room.

•This can be set when the GUI menu “Speaker Configuration” – “Subwoofer” is set to “Yes”.

•Play music or a movie source and select the mode offering the strongest bass.

•Select “LFE+Main” if you want the bass signals to always be produced from the subwoofer.

dDistance

Set distance from listening position to speakers.

Before making the settings, measure the distance from the listening position to the different speakers.

Distance measurement

Select the speaker you want to set, then set the distance. Set the value closest to the measured distance.

[Variable range]

0.00m ~ 18.00m : Display when “Meters” is set.

0.0ft ~ 60.0ft : Display when “Feet” is set.

Two surround back speakers are required to use the THX Ultra2 Cinema, THX Music mode and THX Games mode.

Set the surround back speakers so that the distance to the listening position is the same for both the left and right speakers.

It is also recommended that the deviations of the distance from the listening position to L and R channel speakers (front left (FL) and front right (FR), surround left (SL) and surround right (SR), surround back left (SBL) and surround back right (SBR)) is less than 60 cm (2 ft).

NOTE

Set the space between each speaker to less than 6.00 m (20.0 ft).

Getting Started Connections Setup Other Operations Multi-

3 SW3

When “2SP MIX” or “3SP MIX” is selected, “Subwoofer 1”, “Subwoofer 2” and “Subwoofer 3” are each displayed.

Meters / Feet

Select unit for distance.

Step

Select step (smallest distance).

[Selectable items]

0.1m	0.01m	:	Can be selected when “Meters” is set.
1ft	0.1ft	:	Can be selected when “Feet” is set.

Default

Resets the settings to the default values.

fChannel Level

Adjust channel levels to obtain equal volume from all speakers.

Mode

Select test tone playback method.

[Selectable items] Auto Manual

Start

Output test tone.

[Variable range]	–12dB	~	0dB	~	+12dB
		z
	OFF

z: The subwoofer volume can be turned “OFF” by pressing o when the subwoofer volume is “–12dB”.

Zone Information Troubleshooting Specifications

24