ELECTRONIC TIMER
The timer program consists only of a buzzer which may be set for a maximum period
of 23 hours and 59 minutes. If AUTO is flashing on the panel, push the 
button.
To set the time, push the 
button and the 
or 
until you obtain the desired time in the panel (fig. 24).
Having finished the setting, the clock hour will appear on the panel and the symbol will be lighted.
The countdown will start immediately and may be seen at any moment on the panel
by simply pressing the button 
.
At the end of the time, the 
symbol will be switched off and an intermittent buzzer will go off; this can be stopped by pressing any of the buttons.
SETTING THE FREQUENCY OF THE AUDIBLE SIGNAL
The selection from 3 possibilities of sound can be made by pressing the 
button.
28
Figure 24
A |
U |
T |
O |