CARE AND CLEANING
1.Unplug the unit from the electric outlet before cleaning.
2.Remove the inner pot and lid and wash them with soapy water, rinse and wipe them dry with a soft cloth after each time you use the appliance.
3.Cleaning the lid: Make sure to remove the inner cover by pulling the knob inside. This will allow you to clean the airproof gasket, the support axis, steam valve protective cover and the core of the safety pressure valve (see figure). It is also important to clean the handle, the steam valve and the safety pressure valve on top of the lid.
a. Cleaning the valve
Valve’s
Cover
b. Cleaning the safety pressure valve: From the inside of the lid, move the core of the safety pressure valve up and down as indicated in the diagram and make sure to clean it well with water.
Core of the
Safety Pressure Valve
c. Cleaning the steam valve: Lift it up to remove it and wash it with water before placing it back on its base. On the inside of the Lid, remove the protective cover by pulling it out, clean it well with water and then place it back under the lid by pushing it down until it locks into place.
4.Carefully remove the steam/water collector by pulling it backwards. Discard the water after each use. Clean and place it back on the unit.
5.Do not wash the inner body with water.
6.Do not use any similar hard material and steel wool for cleaning.
7.Store the digital pressure cooker in a dry place after wiping it clean.