ENGLISH
Warning! Never immerse the main body of the appliance, cord set or plug in water or any other liquid.
•We recommend that you first familiarise yourself with all parts of the appliance before using it for the first time. Do not fill with water or connect to the mains supply when doing this.
•To remove any remaining residue from the manufacturing process, we recommend operating the coffee maker as described in the ‘ Use ’ section. This will flush the appliance out. Use water only, do not add coffee.
Note! Ensure that the coffee maker mains cord does not overhang the edge of the worktop.
Note! When the coffee maker is plugged in and operated for the first time, there may be a small amount of smoke and/or odour as the heating elements warm up. This represents no danger or malfunction with the product and should clear after a couple of uses.
Setting the clock
The coffee maker can be started / stopped without setting the clock by pressing the ON/OFF button (3.2).
The clock has to be set for the automatic operation of the coffee maker
•Connect the coffee maker to the mains supply and switch the socket on. The backlight will illuminate blue and the display will start to flash.
•Press and hold the ‘PROG/AUTO’ button (3.1) for 3 seconds. The ‘PROG/AUTO’ indicator light will start to flash indicating you are in programming mode. The display will show the current time and automatic coffee making icon (
)
Note! Programming mode will exit if no button is pressed within 10 seconds. The ‘PROG/AUTO’ indicator light will go out and no changes will be made.
•Press the ‘PROG/AUTO’ button (3.1) (twice) until the clock is displayed. The automatic coffee making icon will not be visible .
•Press the ‘HOUR’ button (3.3) until the correct hour is displayed. The time is set in 12 hour format. (AM is indicated in the upper left hand corner of the clock display and PM in the lower left hand corner).
•Press the ‘MIN’ button (3.5) until the correct minutes are displayed.
•Press the ‘PROG/AUTO’ button (3.1) to ‘set’ the clock. After a short period of time the backlight will automatically go out. The clock is now set.
Adding coffee
•Open the water tank lid (1) and place the filter (12) in the filter holder (8). Add the desired amount of coffee.
•Place the filter holder (8) in filter holder compartment (9). Make sure the pins (10) on the filter holder fit securely into the bayonet holes (11) in the bowl.
•Place the carafe (4) on the hot plate (5)under the filter holder compartment (9).
Adding water
•Using the glass carafe (4), fill the water tank
(7) with the desired quantity of COLD water.
Note! Do not fill with less than 4 cups of water or above the MAX mark on the water tank gauge.
•Close the water tank lid (1) and place the empty carafe (4), with the lid closed,
Warning! DO NOT open the water tank lid (1) whilst the coffee maker is on. Hot water may be ejected.
6