Arcam manual Configuring the AVR350, Set-up mode, Set-up Menu Index, Navigating the Set-up menu

Page 12

Configuring the AVR350

The AVR350 ‘Set-up Menu’ has six ‘Basic’ and five ‘Advanced’ menu screens that take you through the configuration process. The ‘Basic’ menus enable you to match your AVR350 to your speakers; the ‘Advanced’ menus allow you to optimise the operation of your system. Screen shots of these menus are shown in shaded boxes on the following pages.

The best way to set up the AVR350 is using the on-screen display (OSD). To view the OSD for the initial set up, use the composite video output to connect to your TV. This is because the high quality video output has several display modes and may be incompatible with your high quality display device in its default configuration. Note that no on-screen display is available over the HDMI connection.

Set-up mode

OK

MENU

To enter the Set-up menus press and hold the Menu button on the remote control or on the front panel, for at least two seconds. The ‘Set-up Menu Index’ is displayed on your display device.

Set-up Menu Index

The Set-up menu index page is the first page that is displayed when the Set-up menu is entered. This page allows you access to the six ‘Basic’ and five ‘Advanced’ menus.

Navigating the Set-up menu

… by using the remote control

The Set-up menu can be navigated by using the cursor (arrow) keys on the remote control. This is by far the easiest method.

1.To enter the Set-up menu, press and hold the Menu button (which is located immediately under the navigation buttons) for at least two seconds, until the Index page appears. (Pressing the menu button for just a short time will take

you to ‘Main Menu Screen 1’. If this happens, the Main Menu can be closed by pressing menu for a second time.)

2.When the menu heading is highlighted, using the D and E keys will navigate between menu pages. Using this method to navigate between pages the first time the unit is being configured will help to ensure that no pages are missed out.

3.Use the B and C keys to navigate up and down the menu lines.

4.To change the setting for a particular menu item, highlight the item then use the D E keys to cycle through the options for that item.

5.Once you have set all the menu items on a page to have values that are appropriate for your system, move the menu highlight to the top of the screen (the menu heading) and press E to move to the next menu page.

6.At any time, press the Menu button to return to the main Set-up menu index screen.

7.To save the changes you have made, return to the Set-up menu index page and highlight the ‘Save Set-up’ item at the bottom of the screen. Press the OK button to save the settings. Press OK again to exit the Set-up menu.

In addition to the above method of moving from page to page using the D E keys, each menu page can be accessed directly from the Set-up menu index page. This is achieved by using the cursor keys to move the menu highlight to the desired page on the Index page, then pressing OK.

… by using the buttons on the front panel of the AVR350

The AVR350 front panel controls can be used to configure the options. Follow the instructions given for using the remote control, in this case using the effect/6 button for ‘down’, the mode/5 button for ‘up’ and the volume control for left and right.

AVR350

E-12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents AVR350 Safety guidelines Important safety instructionsSafety compliance Contents Using this handbook SafetyBefore you start IntroductionInserting the batteries into the remote control Before making connectionsInstallation Positioning the unitAVR350 rear panel CablesAudio connections Analogue audio connectionsAnalogue pre-amplifier outputs Connection of record decksScart RGB 4-wire connection Video connectionsConnecting loudspeakers Using spade terminalsSpeaker impedance Connecting the AM and FM antennas Zone 2 connectionsFM antenna AM antennaConnecting to a power supply Control connectionsTrigger outputs Mains leadConfiguring the AVR350 Set-up modeSet-up Menu Index Navigating the Set-up menuGeneral Settings ‘Basic’ Set-up MenusSubwoofer Settings Speaker SizesBypass the DSP processing Speaker Delay Settings Speaker delay settingsDistance measurements for 5.1 Level settings EX SettingsTest Tone Cycle Use Channels 6+7 forADV 2 Video Settings ADV 3 Digital Settings‘Advanced’ Set-up Menus ADV 1 Speaker EqSaving Settings and Exit Set-up ADV 4 Zone 2 SettingsADV 5 Analogue Settings ADV 6 Hdmi SettingsRemote control Switching on/off Volume controlOperating your AVR350 Front panel displayHeadphones Input selectionStereo Direct ZoneRemote control buttons Effects/FXMode Treble/BassUsing the tuner Tuning to a stationStoring a preset Deleting a presetUsing the Main Menu Using Zone ‘Dimension’ is set to 3 for normal useDisplay Centre spreading Effect No centre spreading 20.8 69.8 Phantom centreSurround modes Digital multi-channel sourcesTwo-channel source modes Multi-channel source modesFollowing decoding and surround modes are available Mono Speaker positioning DSP Effects ModesBi-wiring and bi-amping loudspeakers Bi-wiring your loudspeakersBefore you start important information Bi-amping your systemBi-amping using an external power-amplifier Front Right Front Left SpeakerTroubleshooting Source switching changes randomly or freezes on one source No Zone 2 audio when playing DTS filmUnable to adjust bass and treble controls Hum on an analogue inputCommand Command code IR Remote CodesSystem code Command Command code Scart connections Scart RGB cable with audio back to processorScart S-video cable with audio back to processor Technical specifications Continual improvement policyRadio interference Guarantee Worldwide GuaranteeOn line registration Command and response formats Appendix Serial programming interfacePower / Alimentation / Betriebsbereitschaft / Stroom Example / Exemple / Beispiel / VoorbeeldEen van de menus van de AVR350 openen Mute / Coupure du son / Stumm / Dempen Changes the audio and video input to a zone Change l’entrée audio et vidéo d’une zoneÄnderung des Audio- oder Videoeingangs einer Zone De audio- en video-ingang naar een zone wijzigenChanges the video input for the main zone Change l’entrée vidéo de la zone principaleÄnderung der Videoquelle der Hauptzone De video-ingang voor de hoofdzone wijzigenDirect mode / Mode Direct / Direktmodus / Modus Direct Command/response sequence to change the effect mode to Party Effect / Effet / Effekt / EffectNavigation / Navigation / Navigation / Navigatie Store / Mémorisation / Speichern / OpslaanCursor/OK instructions. f Instructions Curseur/OK Tune / Réglage / Senderabstimmung / Afstemmen RDS / Système RDS / RDS / RDS Issue Pembroke Avenue, Waterbeach, Cambridge CB5 9QR, England
Related manuals
Manual 38 pages 50.38 Kb

AVR350 specifications

The Arcam AVR350 is a high-performance AV receiver that epitomizes the blend of cutting-edge technology and sophisticated design. Known for its exceptional sound quality and advanced features, it caters to audiophiles and home theater enthusiasts alike. The AVR350 stands out with its robust build quality and user-friendly interface, making it an attractive option for those looking to enhance their home entertainment experience.

One of the key features of the Arcam AVR350 is its 7.1-channel amplification, delivering a powerful audio output of 90 watts per channel. This ensures that every sound in your favorite movies, music, or games is reproduced with clarity and depth. The receiver is equipped with advanced Dolby Digital and DTS decoding technologies, which allow it to support high-definition audio formats. This means users can enjoy a truly immersive surround sound experience, whether it’s the booming effects of an action movie or the delicate nuances of a classical performance.

Another standout characteristic of the AVR350 is its digital signal processing. Incorporating sophisticated algorithms, it optimizes audio performance for different environments, ensuring that listeners achieve the best sound quality no matter the size or shape of the room. The inclusion of Arcam's proprietary room EQ technology further enhances the listening experience by adjusting the sound to compensate for the room acoustics, providing a balanced audio output tailored to individual environments.

Connectivity options are comprehensive, with multiple HDMI inputs and outputs supporting high-definition video formats. The AVR350 also supports a variety of other audio-video inputs, including component and composite video connections, as well as analog audio inputs. This versatility makes it easy to integrate with a range of devices, including Blu-ray players, gaming consoles, and streaming devices.

For users keen on multi-room audio solutions, the AVR350 offers the capability to distribute audio to several zones, allowing you to enjoy different music or media in various parts of the home simultaneously. The intuitive on-screen menu simplifies setup and operation, ensuring that users can easily configure their systems according to their preferences.

In summary, the Arcam AVR350 is a well-rounded AV receiver that combines impressive audio performance, advanced decoding technologies, and flexible connectivity options. Its focus on high-quality sound and user convenience makes it an ideal choice for those looking to elevate their home entertainment systems. With the AVR350, enthusiasts can expect a level of audio fidelity that truly transforms the way they experience sound.
Top Page Image Contents