Arcam AVR350 manual Effect / Effet / Effekt / Effect

Page 44

Decode mode – multi-channel /

Mode de décodage – multicanal /

Dekodiermodus – Mehrkanal /

Decoderingsmodus – meerkanaals

g Set the decode mode for multi-channel material.

f Réglez le mode de décodage pour le matériau multicanal. d Einstellen des Dekodiermodus auf Mehrkanalmaterial.

n De decoderingsmodus voor meerkanaals materiaal instellen.

Example / Exemple / Beispiel / Voorbeeld

g Command/response sequence to change the decode mode to Pro Logic IIx Movie Mode:

f Séquence commande/réponse pour remplacer le mode de décodage par le mode Pro Logic IIx Movie

:

d Befehls-/Rückmeldesequenz zur Änderung des Dekodiermodus in den Modus „Pro Logic IIx Movie‘: n Opdracht- en responsreeks om de decoderingsmodus te wijzigen naar de modus Pro Logic IIx Movie:

Command: 0x50 0x43 0x5f 0x35 0x31 0x32 0x0d

Response: 0x41 0x56 0x5f 0x35 0x50 0x31 0x32 0x0d

Command:

Byte:

Description:

 

 

CC

‘5’ (0x35) (Command code)

 

 

P1

‘1’ (0x31) – Zone 1

 

 

P2

‘.’ (0x2e) – Mono down-mix

 

‘/’ (0x2f) – Stereo down-mix

 

‘0’ (0x30) – DD 5.1 (for DD 5.1 stream

 

only); DTS 5.1 (for DTS stream only);

 

Dolby PLII Movie (for 2.0 Dolby stream

 

only)

 

‘1’ (0x31) - Dolby Digital EX (for 5.1

 

Dolby stream only); DTS EX (for 5.1

 

Dolby stream only); DTS ES Matrix (for

 

5.1 DTS stream only); DD/PLII Music

 

(for 2.0 Dolby stream only)

 

‘2’ (0x32) – DD/PLIIx Movie (for either

 

2.0 or 5.1)

 

‘3’ (0x33) – DD/PLIIx Music (for either

 

2.0 or 5.1)

 

‘4’ (0x34) – DTS NEO6 (for 2.0 Dolby

 

stream only)

 

‘6’ (0x36) – Dolby PL (for 2.0 Dolby

 

stream only)

 

‘9’ (0x39) – Request decode mode

 

setting

 

 

Response:

Byte:

Description:

 

 

RC

‘5’ (0x35) (Reply Code)

 

 

AC

Answer code

 

 

P1

‘1’ (0x31) – Zone 1

 

 

P2

Response (current decode mode):

 

0x2a – DD mono down-mix

 

0x2b – DD stereo down-mix

 

0x30

– DD 5.1

 

0x31

– DD EX

 

0x32

– DD 5.1 PLIIx Movie

 

0x33

– DD 5.1 PLIIx Music

 

0x34

– DTS Mono down-mix

 

0x35

– DTS Stereo down-mix

 

0x36

– DTS 5.1

 

0x37

– DTS ES 6.1 Matrix

 

0x38

– DTS ES 6.1 Discrete

 

0x39

– DTS 96/24

 

0x40

– DD 2.0 + Dolby Mono

 

0x41

– DD 2.0 + Dolby 2-ch

 

0x42

– DD 2.0 + PLII Movie

 

0x43

– DD 2.0 + PLII Music

 

0x44

– DD 2.0 + Dolby PL

 

0x45

– DD 2.0 + PLIIx Movie

 

0x46

– DD 2.0 + PLIIx Music

 

0x47

– DD 2.0 + DTS NEO6

 

(DD=Dolby Digital)

 

 

 

Effect / Effet / Effekt / Effect

g Set the effect mode for two-channel material.

An error message is returned if the selected effect is not available for the current source.

f Réglez le mode d’effets pour le matériau à double canal.

Un message d’erreur s’affiche si l’effet sélectionné n’est pas disponible pour la source actuelle.

d Einstellen des Effektmodus auf Zweikanalmaterial.

Falls der gewählte Effekt für die aktuelle Quelle nicht zur Verfügung steht, wird eine Fehlermeldung ausgegeben.

n De effectmodus voor tweekanaals materiaal instellen.

Er wordt een foutbericht geretourneerd als het geselecteerde effect niet voor de huidige bron beschikbaar is.

Example / Exemple / Beispiel / Voorbeeld

g Command/response sequence to change the effect mode to Party:

f Séquence commande/réponse pour remplacer le mode d’effet par Party : d Befehls-/Rückmeldesequenz zur Änderung des Effektmodus in „Party‘: n Opdracht- en responsreeks om de effectmodus naar 'Party' te wijzigen:

Command: 0x50 0x43 0x5f 0x36 0x31 0x32 0x0d

Response: 0x41 0x56 0x5f 0x36 0x50 0x31 0x32 0x0d

AVR350

E-44

Command:

Byte: Description:

CC‘6’ (0x36) (Command code)

P1 ‘1’ (0x31) – Zone 1

P2 ‘0’ (0x30) – Off ‘1’ (0x31) – Music ‘2’ (0x32) – Party ‘3’ (0x33) – Club ‘4’ (0x34) – Hall ‘5’ (0x35) – Sports ‘6’ (0x36) – Church

‘9’ (0x39) – Request effect mode

Response:

Byte:

Description:

 

 

RC

‘6’ (0x36) (Reply Code)

 

 

AC

Answer code

 

 

P1

‘1’ (0x31) – Zone 1

 

 

P2

Response:

 

The current effect mode is returned, as

 

for the command.

 

 

Image 44
Contents AVR350 Safety compliance Safety guidelinesImportant safety instructions Contents Using this handbook SafetyBefore you start IntroductionInserting the batteries into the remote control Before making connectionsInstallation Positioning the unitAVR350 rear panel CablesAudio connections Analogue audio connectionsAnalogue pre-amplifier outputs Connection of record decksScart RGB 4-wire connection Video connectionsSpeaker impedance Connecting loudspeakersUsing spade terminals Connecting the AM and FM antennas Zone 2 connectionsFM antenna AM antennaConnecting to a power supply Control connectionsTrigger outputs Mains leadConfiguring the AVR350 Set-up modeSet-up Menu Index Navigating the Set-up menuGeneral Settings ‘Basic’ Set-up MenusBypass the DSP processing Subwoofer SettingsSpeaker Sizes Distance measurements for 5.1 Speaker Delay SettingsSpeaker delay settings Level settings EX SettingsTest Tone Cycle Use Channels 6+7 forADV 2 Video Settings ADV 3 Digital Settings‘Advanced’ Set-up Menus ADV 1 Speaker EqSaving Settings and Exit Set-up ADV 4 Zone 2 SettingsADV 5 Analogue Settings ADV 6 Hdmi SettingsRemote control Switching on/off Volume controlOperating your AVR350 Front panel displayHeadphones Input selectionStereo Direct ZoneRemote control buttons Effects/FXMode Treble/BassUsing the tuner Tuning to a stationStoring a preset Deleting a presetUsing the Main Menu Using Zone ‘Dimension’ is set to 3 for normal useDisplay Centre spreading Effect No centre spreading 20.8 69.8 Phantom centreSurround modes Digital multi-channel sourcesFollowing decoding and surround modes are available Mono Two-channel source modesMulti-channel source modes Speaker positioning DSP Effects ModesBi-wiring and bi-amping loudspeakers Bi-wiring your loudspeakersBefore you start important information Bi-amping your systemBi-amping using an external power-amplifier Front Right Front Left SpeakerTroubleshooting Source switching changes randomly or freezes on one source No Zone 2 audio when playing DTS filmUnable to adjust bass and treble controls Hum on an analogue inputCommand Command code IR Remote CodesSystem code Command Command code Scart S-video cable with audio back to processor Scart connectionsScart RGB cable with audio back to processor Radio interference Technical specificationsContinual improvement policy On line registration GuaranteeWorldwide Guarantee Command and response formats Appendix Serial programming interfaceEen van de menus van de AVR350 openen Power / Alimentation / Betriebsbereitschaft / StroomExample / Exemple / Beispiel / Voorbeeld Mute / Coupure du son / Stumm / Dempen Changes the audio and video input to a zone Change l’entrée audio et vidéo d’une zoneÄnderung des Audio- oder Videoeingangs einer Zone De audio- en video-ingang naar een zone wijzigenChanges the video input for the main zone Change l’entrée vidéo de la zone principaleÄnderung der Videoquelle der Hauptzone De video-ingang voor de hoofdzone wijzigenDirect mode / Mode Direct / Direktmodus / Modus Direct Command/response sequence to change the effect mode to Party Effect / Effet / Effekt / EffectCursor/OK instructions. f Instructions Curseur/OK Navigation / Navigation / Navigation / NavigatieStore / Mémorisation / Speichern / Opslaan Tune / Réglage / Senderabstimmung / Afstemmen RDS / Système RDS / RDS / RDS Issue Pembroke Avenue, Waterbeach, Cambridge CB5 9QR, England
Related manuals
Manual 38 pages 50.38 Kb

AVR350 specifications

The Arcam AVR350 is a high-performance AV receiver that epitomizes the blend of cutting-edge technology and sophisticated design. Known for its exceptional sound quality and advanced features, it caters to audiophiles and home theater enthusiasts alike. The AVR350 stands out with its robust build quality and user-friendly interface, making it an attractive option for those looking to enhance their home entertainment experience.

One of the key features of the Arcam AVR350 is its 7.1-channel amplification, delivering a powerful audio output of 90 watts per channel. This ensures that every sound in your favorite movies, music, or games is reproduced with clarity and depth. The receiver is equipped with advanced Dolby Digital and DTS decoding technologies, which allow it to support high-definition audio formats. This means users can enjoy a truly immersive surround sound experience, whether it’s the booming effects of an action movie or the delicate nuances of a classical performance.

Another standout characteristic of the AVR350 is its digital signal processing. Incorporating sophisticated algorithms, it optimizes audio performance for different environments, ensuring that listeners achieve the best sound quality no matter the size or shape of the room. The inclusion of Arcam's proprietary room EQ technology further enhances the listening experience by adjusting the sound to compensate for the room acoustics, providing a balanced audio output tailored to individual environments.

Connectivity options are comprehensive, with multiple HDMI inputs and outputs supporting high-definition video formats. The AVR350 also supports a variety of other audio-video inputs, including component and composite video connections, as well as analog audio inputs. This versatility makes it easy to integrate with a range of devices, including Blu-ray players, gaming consoles, and streaming devices.

For users keen on multi-room audio solutions, the AVR350 offers the capability to distribute audio to several zones, allowing you to enjoy different music or media in various parts of the home simultaneously. The intuitive on-screen menu simplifies setup and operation, ensuring that users can easily configure their systems according to their preferences.

In summary, the Arcam AVR350 is a well-rounded AV receiver that combines impressive audio performance, advanced decoding technologies, and flexible connectivity options. Its focus on high-quality sound and user convenience makes it an ideal choice for those looking to elevate their home entertainment systems. With the AVR350, enthusiasts can expect a level of audio fidelity that truly transforms the way they experience sound.