Arcam AVR350 manual Technical specifications, Continual improvement policy, Radio interference

Page 36

Technical specifications

Analogue audio inputs

Line input sensitivity

0.5/1/2/4V rms (2V rms normal)

Overload margin

+2dB

Input impedance

>22kΩ

Analogue audio outputs

 

Level (at 0dB gain)

2V rms

Maximum level

3.5V rms

Impedance

600Ω

Signal/Noise ratio (analogue input)

100dB unweighted (measurement bandwidth 22kHz)

Signal/Noise ratio (digital input)

100dB unweighted (measurement bandwidth 22kHz)

THD+N (analogue input)

90dB (0.003%) (measurement bandwidth 22kHz)

THD+N (digital input)

90dB (0.003%) (measurement bandwidth 22kHz)

Frequency response

20Hz – 20kHz (±0.25dB)

Headphone impedance

390Ω

Power amplifier

 

Continuous power output (4 or 8Ω)

 

any 2 channels driven

120W (20Hz – 20kHz @ 0.2% THD)

all 7 channels driven

100W (1kHz @ 0.2% THD)

THD at 80% rated power output

0.02% (at 1kHz)

Video inputs and outputs

 

Input and output impedance

75Ω

Composite video level

1V

HF response to (-3dB)

12MHz

S-video level (Y/C)

1V/0.28V

HF response to (-3dB)

12MHz

HQ (component) video

 

level (Y/Cr/Cb)

1V/0.5V/0.5V

level (R/G/B)

1V/1V/1V

HF response to (-3dB)

150MHz

Digital audio inputs

 

Coaxial connection (level/impedance)

0.5V/75Ω

Acceptable sampling frequencies

44.1kHz, 48kHz and 96kHz

Digital output level/impedance

0.5V/75Ω

Trigger outputs

 

Output D.C. voltage level

12V ±1V

(excl. RGB status)

 

Allowable load

30mA max. (min. 400Ω)

Remote inputs and output

 

Signal

modulated 36kHz carrier

Coding

Philips RC-5

General

 

Mains voltage

110V and 230V (switchable)

Power consumption (maximum)

1200VA

Dimensions W x D x H (including feet)

433 x 420 x 145mm

Weight (net)

16.2kg

Weight (packed)

21.4kg

Supplied accessories

Mains lead, CR80 remote control, 2 x AA batteries

E&OE. All specification values are typical unless otherwise stated.

Continual improvement policy

Arcam has a policy of continual improvement for its products. This means that designs and specifications are subject to change without notice.

Radio interference

The AVR350 is a digital audio device which have been designed to very high standards of electromagnetic compatibility.

The unit can radiate RF (radio frequency) energy. In some cases this can cause interference with FM and AM radio reception. If this is the case, keep the AVR350 player and its connecting cables as far from the tuner and its aerials as possible. Connecting the AVR350 and the tuner to different mains sockets can also help to reduce interference.

EU COUNTRIES – These products have been designed to comply with directive 89/336/EEC. USA – These products comply with FCC requirements.

AVR350

E-36

Image 36
Contents AVR350 Safety guidelines Important safety instructionsSafety compliance Contents Using this handbook SafetyBefore you start IntroductionInserting the batteries into the remote control Before making connectionsInstallation Positioning the unitAVR350 rear panel CablesAudio connections Analogue audio connectionsAnalogue pre-amplifier outputs Connection of record decksScart RGB 4-wire connection Video connectionsConnecting loudspeakers Using spade terminalsSpeaker impedance Connecting the AM and FM antennas Zone 2 connectionsFM antenna AM antennaConnecting to a power supply Control connectionsTrigger outputs Mains leadConfiguring the AVR350 Set-up modeSet-up Menu Index Navigating the Set-up menuGeneral Settings ‘Basic’ Set-up MenusSubwoofer Settings Speaker SizesBypass the DSP processing Speaker Delay Settings Speaker delay settingsDistance measurements for 5.1 Level settings EX SettingsTest Tone Cycle Use Channels 6+7 forADV 2 Video Settings ADV 3 Digital Settings‘Advanced’ Set-up Menus ADV 1 Speaker EqSaving Settings and Exit Set-up ADV 4 Zone 2 SettingsADV 5 Analogue Settings ADV 6 Hdmi SettingsRemote control Switching on/off Volume controlOperating your AVR350 Front panel displayHeadphones Input selectionStereo Direct ZoneRemote control buttons Effects/FXMode Treble/BassUsing the tuner Tuning to a stationStoring a preset Deleting a presetUsing the Main Menu Using Zone ‘Dimension’ is set to 3 for normal useDisplay Centre spreading Effect No centre spreading 20.8 69.8 Phantom centreSurround modes Digital multi-channel sourcesTwo-channel source modes Multi-channel source modesFollowing decoding and surround modes are available Mono Speaker positioning DSP Effects ModesBi-wiring and bi-amping loudspeakers Bi-wiring your loudspeakersBefore you start important information Bi-amping your systemBi-amping using an external power-amplifier Front Right Front Left SpeakerTroubleshooting Source switching changes randomly or freezes on one source No Zone 2 audio when playing DTS filmUnable to adjust bass and treble controls Hum on an analogue inputCommand Command code IR Remote CodesSystem code Command Command code Scart connections Scart RGB cable with audio back to processorScart S-video cable with audio back to processor Technical specifications Continual improvement policyRadio interference Guarantee Worldwide GuaranteeOn line registration Command and response formats Appendix Serial programming interfacePower / Alimentation / Betriebsbereitschaft / Stroom Example / Exemple / Beispiel / VoorbeeldEen van de menus van de AVR350 openen Mute / Coupure du son / Stumm / Dempen Changes the audio and video input to a zone Change l’entrée audio et vidéo d’une zoneÄnderung des Audio- oder Videoeingangs einer Zone De audio- en video-ingang naar een zone wijzigenChanges the video input for the main zone Change l’entrée vidéo de la zone principaleÄnderung der Videoquelle der Hauptzone De video-ingang voor de hoofdzone wijzigenDirect mode / Mode Direct / Direktmodus / Modus Direct Command/response sequence to change the effect mode to Party Effect / Effet / Effekt / EffectNavigation / Navigation / Navigation / Navigatie Store / Mémorisation / Speichern / OpslaanCursor/OK instructions. f Instructions Curseur/OK Tune / Réglage / Senderabstimmung / Afstemmen RDS / Système RDS / RDS / RDS Issue Pembroke Avenue, Waterbeach, Cambridge CB5 9QR, England
Related manuals
Manual 38 pages 50.38 Kb

AVR350 specifications

The Arcam AVR350 is a high-performance AV receiver that epitomizes the blend of cutting-edge technology and sophisticated design. Known for its exceptional sound quality and advanced features, it caters to audiophiles and home theater enthusiasts alike. The AVR350 stands out with its robust build quality and user-friendly interface, making it an attractive option for those looking to enhance their home entertainment experience.

One of the key features of the Arcam AVR350 is its 7.1-channel amplification, delivering a powerful audio output of 90 watts per channel. This ensures that every sound in your favorite movies, music, or games is reproduced with clarity and depth. The receiver is equipped with advanced Dolby Digital and DTS decoding technologies, which allow it to support high-definition audio formats. This means users can enjoy a truly immersive surround sound experience, whether it’s the booming effects of an action movie or the delicate nuances of a classical performance.

Another standout characteristic of the AVR350 is its digital signal processing. Incorporating sophisticated algorithms, it optimizes audio performance for different environments, ensuring that listeners achieve the best sound quality no matter the size or shape of the room. The inclusion of Arcam's proprietary room EQ technology further enhances the listening experience by adjusting the sound to compensate for the room acoustics, providing a balanced audio output tailored to individual environments.

Connectivity options are comprehensive, with multiple HDMI inputs and outputs supporting high-definition video formats. The AVR350 also supports a variety of other audio-video inputs, including component and composite video connections, as well as analog audio inputs. This versatility makes it easy to integrate with a range of devices, including Blu-ray players, gaming consoles, and streaming devices.

For users keen on multi-room audio solutions, the AVR350 offers the capability to distribute audio to several zones, allowing you to enjoy different music or media in various parts of the home simultaneously. The intuitive on-screen menu simplifies setup and operation, ensuring that users can easily configure their systems according to their preferences.

In summary, the Arcam AVR350 is a well-rounded AV receiver that combines impressive audio performance, advanced decoding technologies, and flexible connectivity options. Its focus on high-quality sound and user convenience makes it an ideal choice for those looking to elevate their home entertainment systems. With the AVR350, enthusiasts can expect a level of audio fidelity that truly transforms the way they experience sound.