Arcam AVR350 manual Effects/FX, Mode, Treble/Bass, Remote control buttons

Page 22

Effects/FX

The EFFECT button (FX on the remote) cycles through the available effect modes. The effects are only available when the AVR350 is in stereo mode.

For more information on the effects, see the section ‘DSP Effects Modes’, page 25.

Mode

When a selected digital input carries a Dolby Digital or DTS signal, the AVR350 detects it automatically and processes the signal accordingly.

Effect

Description

 

 

None

No effects active, stereo signal

 

 

Music

Extracted ambience and centre information

 

 

Party

All speakers on

 

 

Club

Small room

 

 

Hall

Medium reverberant room

 

 

Sport

Very reverberant with extracted ambience

 

and dry centre dialogue

 

 

Church

Long reverberant room

 

 

For an analogue input or when no Dolby Digital or DTS signal is detected, pressing the MODE button cycles through the available

surround sound modes; for Dolby Digital or DTS signals, the mode button cycles through the processing modes available for these types of signal. All of the available modes are detailed later in this handbook, starting on page 26.

The selected mode is displayed in the main section of the display for three seconds, before reverting to show the current volume. The surround mode continues to be shown on the display.

Treble/Bass

These allow you to alter temporarily the bass and treble controls for all currently active speakers. In the case of Stereo, this would only apply to the front left and right speakers. In Effects, Pro Logic IIx Music, Dolby Digital and DTS modes (for example), this would apply to all present speakers.

You can adjust the bass and treble by up to ±6dB. These adjustments are in addition to those made in ‘Speaker Eq’ in the Set-up Menu. However, the maximum overall tone control range for each speaker using this screen plus the settings in ‘Speaker Eq’ is still ±6dB (not ±12dB).

To select the speaker to be adjusted, press the Treble/Bass button repeatedly until the desired speaker is shown on the front-panel display. Then use the volume control knob to adjust the setting up or down.

Note that bass and treble alterations are not available in Stereo mode when Auto Stereo Tone BypasS is set to Yes, or in Stereo Direct mode.

Remote control buttons

In addition to the buttons detailed above, the following remote control buttons are also relevant.

SUB

This button on the remote allows adjustment of the Subwoofer volume. Press SUB, then adjust using the D E buttons on the navigation pad.

INFO

This button has the same effect as the RDS button on the front panel. See below for details of its operation.

SYN

Delays may be introduced into the video signal by external video processing equipment which causes a mismatch between the audio and video timing. You will notice this by speech sound being out of synchronisation with the lip movements in the video.

To compensate for this you can adjust the lip sync audio delay. Press SYN and use the D E navigation buttons to change the delay.

See page 22 for a full explanation of this feature.

TRM

This allows temporary adjustment of the speaker levels. Press TRM to access the OSD ‘Speaker Trims’ menu, using the navigation buttons to adjust the levels required. Press again to exit the trim function.

AVR350

E-22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents AVR350 Important safety instructions Safety guidelinesSafety compliance Contents Before you start Using this handbookSafety IntroductionInserting the batteries into the remote control Before making connectionsAVR350 rear panel InstallationPositioning the unit CablesAnalogue pre-amplifier outputs Audio connectionsAnalogue audio connections Connection of record decksScart RGB 4-wire connection Video connectionsUsing spade terminals Connecting loudspeakersSpeaker impedance FM antenna Connecting the AM and FM antennasZone 2 connections AM antennaTrigger outputs Connecting to a power supplyControl connections Mains leadSet-up Menu Index Configuring the AVR350Set-up mode Navigating the Set-up menuGeneral Settings ‘Basic’ Set-up MenusSpeaker Sizes Subwoofer SettingsBypass the DSP processing Speaker delay settings Speaker Delay SettingsDistance measurements for 5.1 Test Tone Cycle Level settingsEX Settings Use Channels 6+7 for‘Advanced’ Set-up Menus ADV 2 Video SettingsADV 3 Digital Settings ADV 1 Speaker EqADV 5 Analogue Settings Saving Settings and Exit Set-upADV 4 Zone 2 Settings ADV 6 Hdmi SettingsRemote control Operating your AVR350 Switching on/offVolume control Front panel displayStereo Direct HeadphonesInput selection ZoneMode Remote control buttonsEffects/FX Treble/BassStoring a preset Using the tunerTuning to a station Deleting a presetUsing the Main Menu Display Centre spreading Effect Using Zone‘Dimension’ is set to 3 for normal use No centre spreading 20.8 69.8 Phantom centreSurround modes Digital multi-channel sourcesMulti-channel source modes Two-channel source modesFollowing decoding and surround modes are available Mono Speaker positioning DSP Effects ModesBefore you start important information Bi-wiring and bi-amping loudspeakersBi-wiring your loudspeakers Bi-amping your systemBi-amping using an external power-amplifier Front Right Front Left SpeakerTroubleshooting Unable to adjust bass and treble controls Source switching changes randomly or freezes on one sourceNo Zone 2 audio when playing DTS film Hum on an analogue inputCommand Command code IR Remote CodesSystem code Command Command code Scart RGB cable with audio back to processor Scart connectionsScart S-video cable with audio back to processor Continual improvement policy Technical specificationsRadio interference Worldwide Guarantee GuaranteeOn line registration Command and response formats Appendix Serial programming interfaceExample / Exemple / Beispiel / Voorbeeld Power / Alimentation / Betriebsbereitschaft / StroomEen van de menus van de AVR350 openen Mute / Coupure du son / Stumm / Dempen Änderung des Audio- oder Videoeingangs einer Zone Changes the audio and video input to a zoneChange l’entrée audio et vidéo d’une zone De audio- en video-ingang naar een zone wijzigenÄnderung der Videoquelle der Hauptzone Changes the video input for the main zoneChange l’entrée vidéo de la zone principale De video-ingang voor de hoofdzone wijzigenDirect mode / Mode Direct / Direktmodus / Modus Direct Command/response sequence to change the effect mode to Party Effect / Effet / Effekt / EffectStore / Mémorisation / Speichern / Opslaan Navigation / Navigation / Navigation / NavigatieCursor/OK instructions. f Instructions Curseur/OK Tune / Réglage / Senderabstimmung / Afstemmen RDS / Système RDS / RDS / RDS Issue Pembroke Avenue, Waterbeach, Cambridge CB5 9QR, England
Related manuals
Manual 38 pages 50.38 Kb

AVR350 specifications

The Arcam AVR350 is a high-performance AV receiver that epitomizes the blend of cutting-edge technology and sophisticated design. Known for its exceptional sound quality and advanced features, it caters to audiophiles and home theater enthusiasts alike. The AVR350 stands out with its robust build quality and user-friendly interface, making it an attractive option for those looking to enhance their home entertainment experience.

One of the key features of the Arcam AVR350 is its 7.1-channel amplification, delivering a powerful audio output of 90 watts per channel. This ensures that every sound in your favorite movies, music, or games is reproduced with clarity and depth. The receiver is equipped with advanced Dolby Digital and DTS decoding technologies, which allow it to support high-definition audio formats. This means users can enjoy a truly immersive surround sound experience, whether it’s the booming effects of an action movie or the delicate nuances of a classical performance.

Another standout characteristic of the AVR350 is its digital signal processing. Incorporating sophisticated algorithms, it optimizes audio performance for different environments, ensuring that listeners achieve the best sound quality no matter the size or shape of the room. The inclusion of Arcam's proprietary room EQ technology further enhances the listening experience by adjusting the sound to compensate for the room acoustics, providing a balanced audio output tailored to individual environments.

Connectivity options are comprehensive, with multiple HDMI inputs and outputs supporting high-definition video formats. The AVR350 also supports a variety of other audio-video inputs, including component and composite video connections, as well as analog audio inputs. This versatility makes it easy to integrate with a range of devices, including Blu-ray players, gaming consoles, and streaming devices.

For users keen on multi-room audio solutions, the AVR350 offers the capability to distribute audio to several zones, allowing you to enjoy different music or media in various parts of the home simultaneously. The intuitive on-screen menu simplifies setup and operation, ensuring that users can easily configure their systems according to their preferences.

In summary, the Arcam AVR350 is a well-rounded AV receiver that combines impressive audio performance, advanced decoding technologies, and flexible connectivity options. Its focus on high-quality sound and user convenience makes it an ideal choice for those looking to elevate their home entertainment systems. With the AVR350, enthusiasts can expect a level of audio fidelity that truly transforms the way they experience sound.
Top Page Image Contents