Arcam AVR350 manual Direct mode / Mode Direct / Direktmodus / Modus Direct

Page 43

Direct mode / Mode Direct / Direktmodus / Modus Direct

g Change the stand-by state of a zone. f Modifiez l’état de veille d’une zone.

d Ändern des Stand-by-Zustands einer Zone. n De standby-status van een zone wijzigen.

Example / Exemple / Beispiel / Voorbeeld

g Command/response sequence to switch ‘Direct mode’ on: f Séquence commande/réponse pour activer le mode Direct : d Befehls-/Rückmeldesequenz zur Aktivierung des Direktmodus: n Opdracht- en responsreeks om modus Direct in te schakelen:

Command: 0x50 0x43 0x5f 0x33 0x31 0x31 0x0d

Response: 0x41 0x56 0x5f 0x33 0x50 0x31 0x31 0x0d

Command:

Byte: Description:

CC‘3’ (0x33) (Command code)

P1 ‘1’ (0x31) – Zone 1

P2

Request:

 

‘0’ (0x30) – Set ‘Direct Mode’ off

 

‘1’ (0x31) – Set ‘Direct Mode’ on

 

‘9’ (0x39) – Request mode setting

 

 

Response:

 

 

Byte:

Description:

 

 

RC

‘3’ (0x33) (Reply Code)

 

 

AC

Answer code

 

 

P1

‘1’ (0x31) – Zone 1

 

 

P2

Response:

 

‘0’ (0x30) – ‘Direct mode’ is off

 

‘1’ (0x31) – ‘Direct mode’ is on

 

 

English

Decode mode – two-channel /

Mode de décodage – deux canaux /

Dekodiermodus – Zweikanal /

Decoderingsmodus – tweekanaals

g Set the decode mode for two-channel material.

f Réglez le mode de décodage pour le matériau à double canal.

d Einstellen des Dekodiermodus auf Zweikanalmaterial.

n De decoderingsmodus voor tweekanaals materiaal instellen.

Example / Exemple / Beispiel / Voorbeeld

g Command/response sequence to change the decode mode to Pro Logic IIx Movie Mode:

f Séquence commande/réponse pour remplacer le mode de décodage par le mode Pro Logic IIx Movie :

d Befehls-/Rückmeldesequenz zur Änderung des Dekodiermodus in den Modus „Pro Logic IIx Movie‘:

n Opdracht- en responsreeks om de decoderingsmodus te wijzigen naar de modus Pro Logic IIx Movie:

Command: 0x50 0x43 0x5f 0x34 0x31 0x33 0x0d

Response: 0x41 0x56 0x5f 0x34 0x50 0x31 0x33 0x0d

Command:

Byte: Description:

CC‘4’ (0x34) (Command code)

P1 ‘1’ (0x31) – Zone 1

P2 ‘.’ (0x2e) – Mono ‘/’ (0x2f) – Stereo

‘0’ (0x30) – Pro Logic II Movie Mode ‘1’ (0x31) – Pro Logic II Music Mode ‘3’ (0x33) – Pro Logic IIx Movie Mode ‘4’ (0x34) – Pro Logic IIx Music Mode ‘6’ (0x36) – Dolby Pro Logic Emulation ‘7’ (0x37) – Neo:6 Cinema

‘8’ (0x38) – Neo:6 Music

‘9’ (0x39) – Request decode mode

Response:

Byte:

Description:

 

 

RC

‘4’ (0x34) (Reply Code)

 

 

AC

Answer code

 

 

P1

‘1’ (0x31) – Zone 1

 

 

P2

Response:

 

The current decode mode is returned,

 

as for the command.

 

 

AVR350

E-43

Page 42 Page 44
Image 43
Page 42 Page 44
Contents AVR350 Important safety instructions Safety guidelinesSafety compliance Contents Introduction Using this handbookSafety Before you startBefore making connections Inserting the batteries into the remote controlCables InstallationPositioning the unit AVR350 rear panelConnection of record decks Audio connectionsAnalogue audio connections Analogue pre-amplifier outputsVideo connections Scart RGB 4-wire connectionUsing spade terminals Connecting loudspeakersSpeaker impedance AM antenna Connecting the AM and FM antennasZone 2 connections FM antennaMains lead Connecting to a power supplyControl connections Trigger outputsNavigating the Set-up menu Configuring the AVR350Set-up mode Set-up Menu Index‘Basic’ Set-up Menus General SettingsSpeaker Sizes Subwoofer SettingsBypass the DSP processing Speaker delay settings Speaker Delay SettingsDistance measurements for 5.1 Use Channels 6+7 for Level settingsEX Settings Test Tone CycleADV 1 Speaker Eq ADV 2 Video SettingsADV 3 Digital Settings ‘Advanced’ Set-up MenusADV 6 Hdmi Settings Saving Settings and Exit Set-upADV 4 Zone 2 Settings ADV 5 Analogue SettingsRemote control Front panel display Switching on/offVolume control Operating your AVR350Zone HeadphonesInput selection Stereo DirectTreble/Bass Remote control buttonsEffects/FX ModeDeleting a preset Using the tunerTuning to a station Storing a presetUsing the Main Menu No centre spreading 20.8 69.8 Phantom centre Using Zone‘Dimension’ is set to 3 for normal use Display Centre spreading EffectDigital multi-channel sources Surround modesMulti-channel source modes Two-channel source modesFollowing decoding and surround modes are available Mono DSP Effects Modes Speaker positioningBi-amping your system Bi-wiring and bi-amping loudspeakersBi-wiring your loudspeakers Before you start important informationFront Right Front Left Speaker Bi-amping using an external power-amplifierTroubleshooting Hum on an analogue input Source switching changes randomly or freezes on one sourceNo Zone 2 audio when playing DTS film Unable to adjust bass and treble controlsIR Remote Codes Command Command codeSystem code Command Command code Scart RGB cable with audio back to processor Scart connectionsScart S-video cable with audio back to processor Continual improvement policy Technical specificationsRadio interference Worldwide Guarantee GuaranteeOn line registration Appendix Serial programming interface Command and response formatsExample / Exemple / Beispiel / Voorbeeld Power / Alimentation / Betriebsbereitschaft / StroomEen van de menus van de AVR350 openen Mute / Coupure du son / Stumm / Dempen De audio- en video-ingang naar een zone wijzigen Changes the audio and video input to a zoneChange l’entrée audio et vidéo d’une zone Änderung des Audio- oder Videoeingangs einer ZoneDe video-ingang voor de hoofdzone wijzigen Changes the video input for the main zoneChange l’entrée vidéo de la zone principale Änderung der Videoquelle der HauptzoneDirect mode / Mode Direct / Direktmodus / Modus Direct Effect / Effet / Effekt / Effect Command/response sequence to change the effect mode to PartyStore / Mémorisation / Speichern / Opslaan Navigation / Navigation / Navigation / NavigatieCursor/OK instructions. f Instructions Curseur/OK Tune / Réglage / Senderabstimmung / Afstemmen RDS / Système RDS / RDS / RDS Pembroke Avenue, Waterbeach, Cambridge CB5 9QR, England Issue
Related manuals
Manual 38 pages 50.38 Kb

AVR350 specifications

The Arcam AVR350 is a high-performance AV receiver that epitomizes the blend of cutting-edge technology and sophisticated design. Known for its exceptional sound quality and advanced features, it caters to audiophiles and home theater enthusiasts alike. The AVR350 stands out with its robust build quality and user-friendly interface, making it an attractive option for those looking to enhance their home entertainment experience.

One of the key features of the Arcam AVR350 is its 7.1-channel amplification, delivering a powerful audio output of 90 watts per channel. This ensures that every sound in your favorite movies, music, or games is reproduced with clarity and depth. The receiver is equipped with advanced Dolby Digital and DTS decoding technologies, which allow it to support high-definition audio formats. This means users can enjoy a truly immersive surround sound experience, whether it’s the booming effects of an action movie or the delicate nuances of a classical performance.

Another standout characteristic of the AVR350 is its digital signal processing. Incorporating sophisticated algorithms, it optimizes audio performance for different environments, ensuring that listeners achieve the best sound quality no matter the size or shape of the room. The inclusion of Arcam's proprietary room EQ technology further enhances the listening experience by adjusting the sound to compensate for the room acoustics, providing a balanced audio output tailored to individual environments.

Connectivity options are comprehensive, with multiple HDMI inputs and outputs supporting high-definition video formats. The AVR350 also supports a variety of other audio-video inputs, including component and composite video connections, as well as analog audio inputs. This versatility makes it easy to integrate with a range of devices, including Blu-ray players, gaming consoles, and streaming devices.

For users keen on multi-room audio solutions, the AVR350 offers the capability to distribute audio to several zones, allowing you to enjoy different music or media in various parts of the home simultaneously. The intuitive on-screen menu simplifies setup and operation, ensuring that users can easily configure their systems according to their preferences.

In summary, the Arcam AVR350 is a well-rounded AV receiver that combines impressive audio performance, advanced decoding technologies, and flexible connectivity options. Its focus on high-quality sound and user convenience makes it an ideal choice for those looking to elevate their home entertainment systems. With the AVR350, enthusiasts can expect a level of audio fidelity that truly transforms the way they experience sound.
Top Page Image Contents