Arcam AVR350 manual Navigation / Navigation / Navigation / Navigatie

Page 45

Select analogue/digital /

Sélection analogique/numérique /

Analog/digital auswählen

Analoog/digitaal selecteren

g Select an analogue/digital audio input for the current source.

f Sélectionnez une entrée audio analogique/numérique pour la source actuelle. d Auswählen einer analogen oder digitalen Audioquelle als aktuelle Quelle. n Een analoge/digitale geluidsingang voor de huidige bron selecteren.

Example / Exemple / Beispiel / Voorbeeld

g Command/response sequence to change the audio input to ‘digital’:

f Séquence commande/réponse pour remplacer l’entrée audio par numérique : d Befehls-/Rückmeldesequenz zur Änderung der Audioquelle in „digital‘:

n Opdracht- en responsreeks om de geluidsingang naar 'digital' te wijzigen:

Command: 0x50 0x43 0x5f 0x37 0x31 0x31 0x0d

Response: 0x41 0x56 0x5f 0x37 0x50 0x31 0x31 0x0d

Command:

Byte: Description:

CC‘7’ (0x37) (Command code)

P1 ‘1’ (0x31) – Zone 1

P2 ‘0’ (0x30) – Use the analogue audio for the current source.

‘1’ (0x31) – Use the digital audio for the current source (if available).

‘9’ (0x39) – Request the audio type in use for the current source.

Response:

Byte: Description:

RC

‘7’

(0x37)

(Reply Code)

 

 

AC

Answer code

 

 

 

 

P1

‘1’

(0x31)

– Zone 1

P2 Response:

‘0’ (0x30) – The analogue audio is in use for the current source.

‘1’ (0x31) – The digital audio is in use for the current source.

English

Navigation / Navigation / Navigation / Navigatie

g Cursor/OK instructions. f Instructions Curseur/OK.

dCursor-/OK-Anweisungen. n Instructies voor cursor/OK.

Example / Exemple / Beispiel / Voorbeeld

g Command/response sequence to move the cursor up:

f Séquence commande/réponse pour faire monter le curseur d’un niveau : d Befehls-/Rückmeldesequenz, um den Cursor nach oben zu bewegen: n Opdracht- en responsreeks om de cursor omhoog te bewegen:

Command: 0x50 0x43 0x5f 0x38 0x31 0x3a 0x0d

Response: 0x41 0x56 0x5f 0x38 0x50 0x31 0x3a 0x0d

Command:

Byte: Description:

CC‘8’ (0x38) (Command code)

P1 ‘1’ (0x31) – Zone 1

P2 ‘:’ (0x3a) – Cursor up ‘;’ (0x3b) – Cursor down ‘<’ (0x3c) – Cursor left ‘=’ (0x3d) – OK

‘>’ (0x3e) – Cursor right

Response:

Byte:

Description:

 

 

RC

‘8’ (0x38) (Reply Code)

 

 

AC

Answer code

 

 

P1

‘1’ (0x31) – Zone 1

 

 

P2

Response:

 

The last cursor action is returned.

 

 

Store / Mémorisation / Speichern / Opslaan

g Store the current frequency in a preset.

The value transmitted/returned for the preset is offset by 0x30.

<Formula: actual preset = (received preset + 0x30) f Mémorisez la fréquence actuelle dans une présélection.

La valeur transmise/retournée pour la présélection est décalée de 0x30.

<Formule : présélection réelle = (présélection reçue + 0x30) d Aktuelle Frequenz in einer Voreinstellung abspeichern.

Der übertragene/ausgegebene Wert der Voreinstellung ist um 0x30 versetzt.

<Formel: aktuelle Voreinstellung = (empfangene Voreinstellung + 0x30) n De huidige frequentie in een voorinstelling opslaan.

De overgedragen/geretourneerde waarde voor de voorinstelling wordt met 0x30 verschoven.

<Formule: feitelijke voorinstelling = (ontvangen voorinstelling + 0x30)

Example / Exemple / Beispiel / Voorbeeld

Command:

Byte: Description:

CC‘B’ (0x42) (Command code)

P1 ‘~’ (0x7e) (Reserved)

P2 1-30: the number of the preset to use, + ‘0’ (0x30).

Response:

Byte:

Description:

 

 

RC

‘B’ (0x42) (Reply Code)

 

 

AC

Answer code

 

 

P1

‘~’ (0x7e) (Reserved)

 

 

P2

1-30: the number of the preset used, +

 

‘0’ (0x30).

 

 

g Command/response sequence to store the current station into preset 30:

f Séquence commande/réponse pour mémoriser la station actuelle dans la présélection 30 :

d Befehls-/Rückmeldesequenz zur Speicherung des aktuellen Senders in der Voreinstellung 30 sieht beispielsweise wie folgt aus:

n Opdracht- en responsreeks om het huidige station in voorinstelling 30 op te slaan:

Command: 0x50 0x43 0x5f 0x42 0x7e 0x4e 0x0d

Response: 0x41 0x56 0x5f 0x42 0x50 0x7e 0x4e 0x0d

AVR350

E-45

Page 44 Page 46
Image 45
Page 44 Page 46
Contents AVR350 Safety guidelines Important safety instructionsSafety compliance Contents Safety Using this handbookBefore you start IntroductionBefore making connections Inserting the batteries into the remote controlPositioning the unit InstallationAVR350 rear panel CablesAnalogue audio connections Audio connectionsAnalogue pre-amplifier outputs Connection of record decksVideo connections Scart RGB 4-wire connectionConnecting loudspeakers Using spade terminalsSpeaker impedance Zone 2 connections Connecting the AM and FM antennasFM antenna AM antennaControl connections Connecting to a power supplyTrigger outputs Mains leadSet-up mode Configuring the AVR350Set-up Menu Index Navigating the Set-up menu‘Basic’ Set-up Menus General SettingsSubwoofer Settings Speaker SizesBypass the DSP processing Speaker Delay Settings Speaker delay settingsDistance measurements for 5.1 EX Settings Level settingsTest Tone Cycle Use Channels 6+7 forADV 3 Digital Settings ADV 2 Video Settings‘Advanced’ Set-up Menus ADV 1 Speaker EqADV 4 Zone 2 Settings Saving Settings and Exit Set-upADV 5 Analogue Settings ADV 6 Hdmi SettingsRemote control Volume control Switching on/offOperating your AVR350 Front panel displayInput selection HeadphonesStereo Direct ZoneEffects/FX Remote control buttonsMode Treble/BassTuning to a station Using the tunerStoring a preset Deleting a presetUsing the Main Menu ‘Dimension’ is set to 3 for normal use Using ZoneDisplay Centre spreading Effect No centre spreading 20.8 69.8 Phantom centreDigital multi-channel sources Surround modesTwo-channel source modes Multi-channel source modesFollowing decoding and surround modes are available Mono DSP Effects Modes Speaker positioningBi-wiring your loudspeakers Bi-wiring and bi-amping loudspeakersBefore you start important information Bi-amping your systemFront Right Front Left Speaker Bi-amping using an external power-amplifierTroubleshooting No Zone 2 audio when playing DTS film Source switching changes randomly or freezes on one sourceUnable to adjust bass and treble controls Hum on an analogue inputIR Remote Codes Command Command codeSystem code Command Command code Scart connections Scart RGB cable with audio back to processorScart S-video cable with audio back to processor Technical specifications Continual improvement policyRadio interference Guarantee Worldwide GuaranteeOn line registration Appendix Serial programming interface Command and response formatsPower / Alimentation / Betriebsbereitschaft / Stroom Example / Exemple / Beispiel / VoorbeeldEen van de menus van de AVR350 openen Mute / Coupure du son / Stumm / Dempen Change l’entrée audio et vidéo d’une zone Changes the audio and video input to a zoneÄnderung des Audio- oder Videoeingangs einer Zone De audio- en video-ingang naar een zone wijzigenChange l’entrée vidéo de la zone principale Changes the video input for the main zoneÄnderung der Videoquelle der Hauptzone De video-ingang voor de hoofdzone wijzigenDirect mode / Mode Direct / Direktmodus / Modus Direct Effect / Effet / Effekt / Effect Command/response sequence to change the effect mode to PartyNavigation / Navigation / Navigation / Navigatie Store / Mémorisation / Speichern / OpslaanCursor/OK instructions. f Instructions Curseur/OK Tune / Réglage / Senderabstimmung / Afstemmen RDS / Système RDS / RDS / RDS Pembroke Avenue, Waterbeach, Cambridge CB5 9QR, England Issue
Related manuals
Manual 38 pages 50.38 Kb

AVR350 specifications

The Arcam AVR350 is a high-performance AV receiver that epitomizes the blend of cutting-edge technology and sophisticated design. Known for its exceptional sound quality and advanced features, it caters to audiophiles and home theater enthusiasts alike. The AVR350 stands out with its robust build quality and user-friendly interface, making it an attractive option for those looking to enhance their home entertainment experience.

One of the key features of the Arcam AVR350 is its 7.1-channel amplification, delivering a powerful audio output of 90 watts per channel. This ensures that every sound in your favorite movies, music, or games is reproduced with clarity and depth. The receiver is equipped with advanced Dolby Digital and DTS decoding technologies, which allow it to support high-definition audio formats. This means users can enjoy a truly immersive surround sound experience, whether it’s the booming effects of an action movie or the delicate nuances of a classical performance.

Another standout characteristic of the AVR350 is its digital signal processing. Incorporating sophisticated algorithms, it optimizes audio performance for different environments, ensuring that listeners achieve the best sound quality no matter the size or shape of the room. The inclusion of Arcam's proprietary room EQ technology further enhances the listening experience by adjusting the sound to compensate for the room acoustics, providing a balanced audio output tailored to individual environments.

Connectivity options are comprehensive, with multiple HDMI inputs and outputs supporting high-definition video formats. The AVR350 also supports a variety of other audio-video inputs, including component and composite video connections, as well as analog audio inputs. This versatility makes it easy to integrate with a range of devices, including Blu-ray players, gaming consoles, and streaming devices.

For users keen on multi-room audio solutions, the AVR350 offers the capability to distribute audio to several zones, allowing you to enjoy different music or media in various parts of the home simultaneously. The intuitive on-screen menu simplifies setup and operation, ensuring that users can easily configure their systems according to their preferences.

In summary, the Arcam AVR350 is a well-rounded AV receiver that combines impressive audio performance, advanced decoding technologies, and flexible connectivity options. Its focus on high-quality sound and user convenience makes it an ideal choice for those looking to elevate their home entertainment systems. With the AVR350, enthusiasts can expect a level of audio fidelity that truly transforms the way they experience sound.
Top Page Image Contents