Arcam AVR350 manual RDS / Système RDS / RDS / RDS

Page 47

Example / Exemple / Beispiel / Voorbeeld

g Command/response sequence to increment the FM tuning from 85.0MHz to 85.05MHz:

f Séquence commande/réponse pour incrémenter le réglage FM de 85,0 MHz à 85,05 MHz :

d Befehls-/Rückmeldesequenz zur Erhöhung der UKW-Frequenz von 85 auf 85,05 MHz:

n Opdracht- en responsreeks om de FM-afstemming van 85,0 MHz naar 85,05 MHz te verhogen:

Command: 0x50 0x43 0x5f 0x40 0x7e 0x31 0x0d

Response: 0x41 0x56 0x5f 0x40 0x50 0x35 0x3a 0x0d

RDS / Système RDS / RDS / RDS

English

g Change the RDS display mode. f Modifiez le mode d’affichage RDS. d Ändern des RDS-Anzeigemodus. n De RDS-displaymodus wijzigen.

Example / Exemple / Beispiel / Voorbeeld

g Command/response sequence to set the display to the station name:

f Séquence commande/réponse pour régler l’affichage sur le nom de la station :

d Befehls-/Rückmeldesequenz zur Anzeige des Sendernamens:

n Opdracht- en responsreeks om het display op de stationsnaam in te stellen:

Command: 0x50 0x43 0x5f 0x41 0x7e 0x31 0x0d

Response: 0x41 0x56 0x5f 0x41 0x50 0x7e 0x31 0x0d

Command:

Byte: Description:

CC‘A’ (0x41) (Command code)

P1 ‘~’ (0x7e) (Reserved)

P2 ‘0’ (0x30) – Show the current frequency.

‘1’ (0x31) – Show the station name. ‘2’ (0x32) – Show the station text. ‘9’ (0x39) – Request the current RDS setting.

Response:

Byte:

Description:

 

 

RC

‘A’ (0x41) (Reply Code)

 

 

AC

Answer code

 

 

P1

‘~’ (0x7e) (Reserved)

 

 

 

P2

‘0’ (0x30)

– Frequency is shown.

 

‘1’ (0x31)

– Station name is shown.

 

‘2’ (0x32)

– Station text is shown.

 

 

 

Preset selection /

Sélection de la présélection /

Auswählen der aktuellen Voreinstellung /

Selecteren van de huidige voorinstelling

g Select a specific tuner preset.

The value returned for the new preset is offset by 0x30. To obtain the correct value, subtract 0x30 from the reported value.

<Formula: actual preset = (reported preset – 0x30) f Sélectionner de la présélection actuelle du tuner.

La valeur retransmise pour la nouvelle présélection est décalée de 0x30. Pour obtenir la valeur correcte, ôtez 0x30 de la valeur rapportée.

<Formule : présélection réelle = (présélection rapportée + 0x30) d Auswählen einen spezifischen Tuner voreinstellen.

Der ausgegebene Wert für die neue Voreinstellung ist um 0x30 versetzt. Subtrahieren Sie 0x30 vom angegebenen Wert, um den richtigen Wert zu erhalten.

<Formel: aktuelle Voreinstellung = (angegebene Voreinstellung + 0x30) n De voorinstelling van de tuner selecteren.

De geretourneerde waarde voor de nieuwe voorinstelling wordt met 0x30 verschoven. Wilt u de juiste waarde verkrijgen, dan moet u 0x30 van de weergegeven waarde aftrekken.

<Formule: feitelijke voorinstelling = (weergegeven voorinstelling – 0 x 30)

Example / Exemple / Beispiel / Voorbeeld

Command:

Byte: Description:

CC‘C’ (0x43) (Command code)

P1 ‘~’ (0x7e) (Reserved)

P2 FM: 1-30: the number of the required preset, + ‘0’ (0x30).

AM: 1-10: the number of the required preset, + ‘0’ (0x30)

Response:

Byte:

Description:

 

 

RC

‘C’ (0x43) (Reply Code)

 

 

AC

Answer code

 

 

P1

‘~’ (0x7e) (Reserved)

 

 

P2

Response:

 

The preset number after the command

 

has been processed, + ‘0’ (0x30)

 

 

g Command/response sequence to change the preset number to 10:

f Séquence commande/réponse pour changer le nombre de présélection à 10 :

d Befehls-/Rückmeldesequenz, um die Sendernummer auf 10 zu ändern:

n Opdracht- en responsreeks om het voorinstellingsnummer naar 10 te veranderen:

Command: 0x50 0x43 0x5f 0x43 0x7e 0x3a 0x0d

Response: 0x41 0x56 0x5f 0x43 0x50 0x7e 0x3a 0x0d

AVR350

E-47

Page 46 Page 48
Image 47
Page 46 Page 48
Contents AVR350 Safety compliance Safety guidelinesImportant safety instructions Contents Introduction Using this handbookSafety Before you startBefore making connections Inserting the batteries into the remote controlCables InstallationPositioning the unit AVR350 rear panelConnection of record decks Audio connectionsAnalogue audio connections Analogue pre-amplifier outputsVideo connections Scart RGB 4-wire connectionSpeaker impedance Connecting loudspeakersUsing spade terminals AM antenna Connecting the AM and FM antennasZone 2 connections FM antennaMains lead Connecting to a power supplyControl connections Trigger outputsNavigating the Set-up menu Configuring the AVR350Set-up mode Set-up Menu Index‘Basic’ Set-up Menus General SettingsBypass the DSP processing Subwoofer SettingsSpeaker Sizes Distance measurements for 5.1 Speaker Delay SettingsSpeaker delay settings Use Channels 6+7 for Level settingsEX Settings Test Tone CycleADV 1 Speaker Eq ADV 2 Video SettingsADV 3 Digital Settings ‘Advanced’ Set-up MenusADV 6 Hdmi Settings Saving Settings and Exit Set-upADV 4 Zone 2 Settings ADV 5 Analogue SettingsRemote control Front panel display Switching on/offVolume control Operating your AVR350Zone HeadphonesInput selection Stereo DirectTreble/Bass Remote control buttonsEffects/FX ModeDeleting a preset Using the tunerTuning to a station Storing a presetUsing the Main Menu No centre spreading 20.8 69.8 Phantom centre Using Zone‘Dimension’ is set to 3 for normal use Display Centre spreading EffectDigital multi-channel sources Surround modesFollowing decoding and surround modes are available Mono Two-channel source modesMulti-channel source modes DSP Effects Modes Speaker positioningBi-amping your system Bi-wiring and bi-amping loudspeakersBi-wiring your loudspeakers Before you start important informationFront Right Front Left Speaker Bi-amping using an external power-amplifierTroubleshooting Hum on an analogue input Source switching changes randomly or freezes on one sourceNo Zone 2 audio when playing DTS film Unable to adjust bass and treble controlsIR Remote Codes Command Command codeSystem code Command Command code Scart S-video cable with audio back to processor Scart connectionsScart RGB cable with audio back to processor Radio interference Technical specificationsContinual improvement policy On line registration GuaranteeWorldwide Guarantee Appendix Serial programming interface Command and response formatsEen van de menus van de AVR350 openen Power / Alimentation / Betriebsbereitschaft / StroomExample / Exemple / Beispiel / Voorbeeld Mute / Coupure du son / Stumm / Dempen De audio- en video-ingang naar een zone wijzigen Changes the audio and video input to a zoneChange l’entrée audio et vidéo d’une zone Änderung des Audio- oder Videoeingangs einer ZoneDe video-ingang voor de hoofdzone wijzigen Changes the video input for the main zoneChange l’entrée vidéo de la zone principale Änderung der Videoquelle der HauptzoneDirect mode / Mode Direct / Direktmodus / Modus Direct Effect / Effet / Effekt / Effect Command/response sequence to change the effect mode to PartyCursor/OK instructions. f Instructions Curseur/OK Navigation / Navigation / Navigation / NavigatieStore / Mémorisation / Speichern / Opslaan Tune / Réglage / Senderabstimmung / Afstemmen RDS / Système RDS / RDS / RDS Pembroke Avenue, Waterbeach, Cambridge CB5 9QR, England Issue
Related manuals
Manual 38 pages 50.38 Kb

AVR350 specifications

The Arcam AVR350 is a high-performance AV receiver that epitomizes the blend of cutting-edge technology and sophisticated design. Known for its exceptional sound quality and advanced features, it caters to audiophiles and home theater enthusiasts alike. The AVR350 stands out with its robust build quality and user-friendly interface, making it an attractive option for those looking to enhance their home entertainment experience.

One of the key features of the Arcam AVR350 is its 7.1-channel amplification, delivering a powerful audio output of 90 watts per channel. This ensures that every sound in your favorite movies, music, or games is reproduced with clarity and depth. The receiver is equipped with advanced Dolby Digital and DTS decoding technologies, which allow it to support high-definition audio formats. This means users can enjoy a truly immersive surround sound experience, whether it’s the booming effects of an action movie or the delicate nuances of a classical performance.

Another standout characteristic of the AVR350 is its digital signal processing. Incorporating sophisticated algorithms, it optimizes audio performance for different environments, ensuring that listeners achieve the best sound quality no matter the size or shape of the room. The inclusion of Arcam's proprietary room EQ technology further enhances the listening experience by adjusting the sound to compensate for the room acoustics, providing a balanced audio output tailored to individual environments.

Connectivity options are comprehensive, with multiple HDMI inputs and outputs supporting high-definition video formats. The AVR350 also supports a variety of other audio-video inputs, including component and composite video connections, as well as analog audio inputs. This versatility makes it easy to integrate with a range of devices, including Blu-ray players, gaming consoles, and streaming devices.

For users keen on multi-room audio solutions, the AVR350 offers the capability to distribute audio to several zones, allowing you to enjoy different music or media in various parts of the home simultaneously. The intuitive on-screen menu simplifies setup and operation, ensuring that users can easily configure their systems according to their preferences.

In summary, the Arcam AVR350 is a well-rounded AV receiver that combines impressive audio performance, advanced decoding technologies, and flexible connectivity options. Its focus on high-quality sound and user convenience makes it an ideal choice for those looking to elevate their home entertainment systems. With the AVR350, enthusiasts can expect a level of audio fidelity that truly transforms the way they experience sound.
Top Page Image Contents