Arcam AVR350 manual Power / Alimentation / Betriebsbereitschaft / Stroom

Page 39

Command Specifications / Spécifications des commandes / Befehlsspezifikationen / Opdrachtspecificaties

Power / Alimentation / Betriebsbereitschaft / Stroom

g Change the stand-by state of a zone. f Modifiez l’état de veille d’une zone.

d Ändern des Stand-by-Zustands einer Zone. n De standby-status van een zone wijzigen.

Example / Exemple / Beispiel / Voorbeeld

g Command/response sequence to bring the main zone out of standby:

f Séquence commande/réponse pour désactiver le mode veille de la zone principale :

d Befehls-/Rückmeldesequenz zur Aktivierung der im Stand-by-Modus befindlichen Hauptzone:

n Opdracht- en responsreeks om de hoofdzone uit standby te halen:

Command: 0x50 0x43 0x5f 0x2a 0x31 0x31 0x0d

Response: 0x41 0x56 0x5f 0x2a 0x50 0x31 0x31 0x0d

Display Brightness / Luminosité de l’affichage /

Helligkeit des Displays / Displayhelderheid

g Change the brightness of the display on the front panel of the AVR350.

f Modifiez la luminosité de l’affichage du panneau avant du système AVR350.

d Ändern der Helligkeit des Displays an der Gerätevorderseite des AVR350. n De helderheid van het display op de voorkant van de AVR350 wijzigen.

Example / Exemple / Beispiel / Voorbeeld

g Command/response sequence to change the brightness of the display to ‘off’:

f Séquence commande/réponse pour désactiver la luminosité de l’affichage :

d Befehls-/Rückmeldesequenz, mit der der Helligkeitsstatus des Displays auf „aus‘ gesetzt wird:

n Opdracht- en responsreeks om de helderheid van het display op 'uit' te zetten:

Command: 0x50 0x43 0x5f 0x2b 0x31 0x30 0x0d

Response: 0x41 0x56 0x5f 0x2b 0x50 0x31 0x30 0x0d

Open a menu / Ouverture d’un menu /

Aufrufen eines Menüs / Een menu openen

g Open one of the menus of the AVR350.

If the Set-up menu is closed as a result of opening a different menu, any change made in the Set-up menu is lost.

f Ouvrez l’un des menus du système AVR350.

Si le menu Set-up est fermé en raison de l’ouverture d’un autre menu, toute modification apportée au menu Set-up est perdue.

d Aufrufen eines der Menüs des AVR350.

Falls das Set-up-Menü aufgrund des Aufrufs eines anderen Menüs geschlossen wird, gehen sämtliche im Set-up-Menü vorgenommenen Änderungen verloren.

n Een van de menu's van de AVR350 openen.

Als het set-up-menu gesloten wordt omdat er een ander menu geopend wordt, gaan eventuele wijzigingen die in het set-up-menu gemaakt zijn, verloren.

Example / Exemple / Beispiel / Voorbeeld

g Command/response sequence to open the ‘Trim’ menu:

f Séquence commande/réponse pour ouvrir le menu Trim :

d Befehls-/Rückmeldesequenz zum Aufrufen des Trim-Menüs: n Opdracht- en responsreeks om het menu Trim te openen:

Command: 0x50 0x43 0x5f 0x2c 0x31 0x33 0x0d

Response: 0x41 0x56 0x5f 0x2c 0x50 0x31 0x33 0x0d

Command:

Byte:

Description:

 

 

CC

‘*’ (0x2a) (Command code)

 

 

P1

Zone:

 

‘1’ (0x31) – Zone 1

 

‘2’ (0x32) – Zone 2

 

 

P2

Request:

 

‘0’ (0x30) – Enter stand-by state

 

‘1’ (0x31) – Enter power-on state

 

‘2’ (0x32) – Enter system stand-by

 

state (both Zone 1 and 2 stand-by and

 

power amplifiers off)

 

‘9’ (0x39) – Request power state

 

 

Response:

 

 

Byte:

Description:

 

 

RC

‘*’ (0x2a) (Reply Code)

 

 

AC

Answer code

 

 

P1

Zone:

 

‘1’ (0x31) – Zone 1

 

‘2’ (0x32) – Zone 2

 

 

P2

Response:

 

‘0’ (0x30) – Zone is in stand-by

 

‘1’ (0x31) – Zone is on

 

 

Command:

Byte: Description:

CC ‘+’ (0x2b) (Command code)

P1 Zone:

‘1’ (0x31) – Zone 1

P2 Request:

‘0’ (0x30) – Front panel off

‘1’ (0x31) – Front panel dimmed ‘2’ (0x32) – Front panel bright ‘9’ (0x39) – Request brightness

Response:

Byte:

Description:

 

 

RC

‘+’ (0x2b) (Reply Code)

 

 

AC

Answer code

 

 

 

P1

‘1’ (0x31)

– Zone 1

 

 

P2

Response:

 

‘0’ (0x30)

– Front panel is off

 

‘1’ (0x31)

– Front panel is dimmed

 

‘2’ (0x32)

– Front panel is bright

 

 

 

Command:

Byte: Description:

CC ‘,’ (0x2c) (Command code)

P1 Zone:

‘1’ (0x31) – Zone 1

P2 Request:

‘1’ (0x31) – Open the Main Menu ‘2’ (0x32) – Open the Set-up Menu ‘3’ (0x33) – Open the Trim Menu

‘4’ (0x34) – Open the Sub Trim Menu ‘5’ (0x35) – Open the Lip Sync Menu ‘9’ (0x39) – Request the open menu state

Response:

Byte:

Description:

 

 

 

 

RC

‘,’ (0x2c) (Reply Code)

 

 

 

 

AC

Answer code

 

 

 

 

P1

‘1’ (0x31) – Zone 1

 

 

 

 

P2

Response:

 

 

‘0’ (0x30) – No menu is open

 

 

or: the current open menu

 

 

is returned, as left.

AVR350

 

 

 

 

E-39

 

 

 

English

Page 38 Page 40
Image 39
Page 38 Page 40
Contents AVR350 Safety guidelines Important safety instructionsSafety compliance Contents Introduction Using this handbookSafety Before you startBefore making connections Inserting the batteries into the remote controlCables InstallationPositioning the unit AVR350 rear panelConnection of record decks Audio connectionsAnalogue audio connections Analogue pre-amplifier outputsVideo connections Scart RGB 4-wire connectionConnecting loudspeakers Using spade terminalsSpeaker impedance AM antenna Connecting the AM and FM antennasZone 2 connections FM antennaMains lead Connecting to a power supplyControl connections Trigger outputsNavigating the Set-up menu Configuring the AVR350Set-up mode Set-up Menu Index‘Basic’ Set-up Menus General SettingsSubwoofer Settings Speaker SizesBypass the DSP processing Speaker Delay Settings Speaker delay settingsDistance measurements for 5.1 Use Channels 6+7 for Level settingsEX Settings Test Tone CycleADV 1 Speaker Eq ADV 2 Video SettingsADV 3 Digital Settings ‘Advanced’ Set-up MenusADV 6 Hdmi Settings Saving Settings and Exit Set-upADV 4 Zone 2 Settings ADV 5 Analogue SettingsRemote control Front panel display Switching on/offVolume control Operating your AVR350Zone HeadphonesInput selection Stereo DirectTreble/Bass Remote control buttonsEffects/FX ModeDeleting a preset Using the tunerTuning to a station Storing a presetUsing the Main Menu No centre spreading 20.8 69.8 Phantom centre Using Zone‘Dimension’ is set to 3 for normal use Display Centre spreading EffectDigital multi-channel sources Surround modesTwo-channel source modes Multi-channel source modesFollowing decoding and surround modes are available Mono DSP Effects Modes Speaker positioningBi-amping your system Bi-wiring and bi-amping loudspeakersBi-wiring your loudspeakers Before you start important informationFront Right Front Left Speaker Bi-amping using an external power-amplifierTroubleshooting Hum on an analogue input Source switching changes randomly or freezes on one sourceNo Zone 2 audio when playing DTS film Unable to adjust bass and treble controlsIR Remote Codes Command Command codeSystem code Command Command code Scart connections Scart RGB cable with audio back to processorScart S-video cable with audio back to processor Technical specifications Continual improvement policyRadio interference Guarantee Worldwide GuaranteeOn line registration Appendix Serial programming interface Command and response formatsPower / Alimentation / Betriebsbereitschaft / Stroom Example / Exemple / Beispiel / VoorbeeldEen van de menus van de AVR350 openen Mute / Coupure du son / Stumm / Dempen De audio- en video-ingang naar een zone wijzigen Changes the audio and video input to a zoneChange l’entrée audio et vidéo d’une zone Änderung des Audio- oder Videoeingangs einer ZoneDe video-ingang voor de hoofdzone wijzigen Changes the video input for the main zoneChange l’entrée vidéo de la zone principale Änderung der Videoquelle der HauptzoneDirect mode / Mode Direct / Direktmodus / Modus Direct Effect / Effet / Effekt / Effect Command/response sequence to change the effect mode to PartyNavigation / Navigation / Navigation / Navigatie Store / Mémorisation / Speichern / OpslaanCursor/OK instructions. f Instructions Curseur/OK Tune / Réglage / Senderabstimmung / Afstemmen RDS / Système RDS / RDS / RDS Pembroke Avenue, Waterbeach, Cambridge CB5 9QR, England Issue
Related manuals
Manual 38 pages 50.38 Kb

AVR350 specifications

The Arcam AVR350 is a high-performance AV receiver that epitomizes the blend of cutting-edge technology and sophisticated design. Known for its exceptional sound quality and advanced features, it caters to audiophiles and home theater enthusiasts alike. The AVR350 stands out with its robust build quality and user-friendly interface, making it an attractive option for those looking to enhance their home entertainment experience.

One of the key features of the Arcam AVR350 is its 7.1-channel amplification, delivering a powerful audio output of 90 watts per channel. This ensures that every sound in your favorite movies, music, or games is reproduced with clarity and depth. The receiver is equipped with advanced Dolby Digital and DTS decoding technologies, which allow it to support high-definition audio formats. This means users can enjoy a truly immersive surround sound experience, whether it’s the booming effects of an action movie or the delicate nuances of a classical performance.

Another standout characteristic of the AVR350 is its digital signal processing. Incorporating sophisticated algorithms, it optimizes audio performance for different environments, ensuring that listeners achieve the best sound quality no matter the size or shape of the room. The inclusion of Arcam's proprietary room EQ technology further enhances the listening experience by adjusting the sound to compensate for the room acoustics, providing a balanced audio output tailored to individual environments.

Connectivity options are comprehensive, with multiple HDMI inputs and outputs supporting high-definition video formats. The AVR350 also supports a variety of other audio-video inputs, including component and composite video connections, as well as analog audio inputs. This versatility makes it easy to integrate with a range of devices, including Blu-ray players, gaming consoles, and streaming devices.

For users keen on multi-room audio solutions, the AVR350 offers the capability to distribute audio to several zones, allowing you to enjoy different music or media in various parts of the home simultaneously. The intuitive on-screen menu simplifies setup and operation, ensuring that users can easily configure their systems according to their preferences.

In summary, the Arcam AVR350 is a well-rounded AV receiver that combines impressive audio performance, advanced decoding technologies, and flexible connectivity options. Its focus on high-quality sound and user convenience makes it an ideal choice for those looking to elevate their home entertainment systems. With the AVR350, enthusiasts can expect a level of audio fidelity that truly transforms the way they experience sound.
Top Page Image Contents