Xantech BXAUDIO4X4 installation instructions Planning the System, Enable / Disable Program Mode

Page 21

Model BXAUDIO4X4

Page: 21

SECTION 5.0: PROGRAMMING USING XPS™ Point and Shoot IR Learning

When programming the BXAUDIO4X4 System, the BXAUDIO4X4 Controller and a single LC4KP keypad plugged into the Zone 1 Keypad port are required as well as the Manufactures remotes for each of the Source Components to be used. All Zones keypads are programmed identically using the Zone 1 Keypad.

Note: The following LC4KP buttons are fixed factory-programmed buttons and are not programmable by the

Installer: VOLUME UP, VOLUME DOWN, and STATUS.

PLANNING THE SYSTEM

Before attempting any programming, plan the system configuration first. This should include the following:

1.Determine the brand and type of all source components to be used. Source 1: _____________

Source 2: _____________

Source 3: _____________

Source 4: _____________

CAUTION: See caution card (included) for the latest information regarding code compatibility before finalizing the system as there may be some IR code incompatibilities.

2.Determine the components to be used in each zone. Some sources may not be available in all zones.

3.Assemble the components into a working BXAUDIO4X4 system such as that shown in Figure 10. Testing the system prior to installation can sometimes save time with unexpected problems.

4.Program the BXAUDIO4X4 System using XPS™ direct-IR Learning programming.

5.Confirm all functions in all zones.

ENABLE / DISABLE PROGRAM MODE

To Enable Program mode:

1.Plug in a single LC4KP Keypad into the Zone 1 Keypad port on the rear of the BXAUDIO4X4 Controller

2.Power the BXAUDIO4X4 ‘ON’ via the Power Switch located on the rear of the BXAUDIO4X4 Controller and allow to boot completely.

3.Power up the Zone 1 Keypad.

4.Place the “Mode” switch on the front panel into the “PGM” (UP) position.

To Disable Program mode:

1.Place the “Mode” switch on the front panel into the “Run” (DOWN) position.

2.Reboot the BXAUDIO4X4 Controller by recycling the power using the Power Switch on the rear of the BXAUDIO Controller.

© 2005 Xantech Corporation

Image 21
Contents Installation Instructions Not Expose this Appliance to Rain or Moisture Safety Instructions Read Before Operating EquipmentTable of Contents General Information Zone Features/Specifications CONTROLLER/AMPLIFIER FeaturesEZProgramming Features Keypad FeaturesFront Panel BXAUDIO4X4 CONTROLLER/AMPLIFIER Feature DescriptionsZone LED’s System Status Power-Up Mode PGM/RUN SwitchZone Status Operational Mode Program Keypad LED8Model BXAUDIO4X4 Model BXAUDIO4X4 BXAUDIO4X4 LC4KP Keypad Feature Descriptions Model BXAUDIO4X4 Keypad Rear Panel Features and Functions Model BXAUDIO4X4 Installation Operation OUT-OF-THE-BOXExpanded System Source Label Installation LC4KP Keypad Installation InstructionsConnecting the Bxaudio System Source Component Connections Audio ConnectionsCSM1 Threshold Adjustments Sense Input ConnectionsSpeaker Connections Control Out and Status Connections AC Power ConnectionsControl Out Connections AT the Zone LocationOFF BXAUDIO4X4/LC4KP Keypad CAT5 Cable Lengths Extended Runs and Secondary Keypad In ZoneSpeaker Connections Zone Planning the System Enable / Disable Program ModeProgramming Keypad Buttons Single Commands Programming Keypad Button with a Sequence of CommandsProgramming Button Layout Programming Timed Delays Programming Toggle IR CommandsDeleting a Macro Programming Source Power Management Deleting a Power Management Macro Party Mode Linking of ZonesZone System -Expanded To Un-Link Zones Expanded Wiring Connections Expansion ProcedureConnecting the Bxaudio Controllers Combining IR OutputsConfiguring the ‘Master’ Unit Zones One through Four Enabling Expansion ModeCloning the Bxaudio System Disabling Expansion ModeTo Initialize the System Initializing the System Clearing ALL MACRO’SChange Sources Buttons 1 thru Operating InstructionsParty Mode Specifications IR SensorGeneral Warranty Model BXAUDIO4X4 Xantech Corporation Xantech Corporation
Related manuals
Manual 2 pages 41.3 Kb

BXAUDIO4X4 specifications

The Xantech BXAUDIO4X4 is a powerful audio distribution system designed to meet the demands of modern multi-zone audio applications. This versatile device allows users to easily distribute high-quality audio signals from various sources to multiple zones throughout residential or commercial spaces. Its sleek design and advanced features make it a popular choice among audio professionals and enthusiasts alike.

One of the main features of the BXAUDIO4X4 is its ability to handle up to four audio sources and distribute them to four individual zones. This flexibility allows users to tailor their listening experience in each area, ensuring that everyone can enjoy their preferred audio content, whether it be music, podcasts, or live broadcasts. Each zone can be independently controlled, providing the ultimate convenience and customization.

In terms of technology, the BXAUDIO4X4 boasts built-in digital signal processing capabilities, which enhance the audio quality and ensure precise sound management. The device supports a variety of audio formats, making it compatible with numerous devices and sources, including streaming services, digital media players, and traditional audio equipment. Additionally, it features robust connection options, including XLR and RCA inputs, ensuring seamless integration into existing audio setups.

The BXAUDIO4X4 also includes user-friendly controls and an intuitive interface, making it easy for anyone to operate. The system can be controlled via a dedicated app, allowing users to adjust audio settings, select sources, and manage zones from their smartphones or tablets. This level of convenience is particularly valuable in larger spaces, where users may want to control audio without needing to access a central control point physically.

Another key characteristic of the BXAUDIO4X4 is its reliability and durability. Built to withstand the rigors of both residential and commercial environments, it features high-quality components that ensure long-lasting performance. The device is also designed for easy installation, with clear labeling and straightforward setup procedures that cater to both professional installers and DIY enthusiasts.

Overall, the Xantech BXAUDIO4X4 stands out as an exceptional audio distribution solution. With its robust features, advanced technologies, and user-centric design, it is an excellent choice for anyone looking to enhance their audio experience across multiple zones. Whether for entertaining guests, creating an immersive home theater, or managing sound in a commercial setting, the BXAUDIO4X4 delivers unparalleled performance and versatility.