Xantech BXAUDIO4X4 Enabling Expansion Mode, Configuring the ‘Master’ Unit Zones One through Four

Page 28

Page: 28

Model BXAUDIO4X4

CONTROLLER1

RI

AM/FM Tuner

AV61

AV61orY-Cable

283TPEmitter

SAT Receiver

XMUSIC

CD Changer

 

 

283TPEmitter

283TPEmitter

AV61

AV61

AV61

AV61 or Y-Cable

AV61 or Y-Cable

AV61 or Y-Cable

283TPEmitter

CONTROLLER2

Serial DB9

Male to Male

Null Modem Cable

Figure 11 – Expanded System Diagram

ENABLING EXPANSION MODE

When configuring the BXAUDIO Controller into an Expanded (8-Zone) System, one unit will need to be designated as the ‘Master’ unit and the other as the ‘Salve’ unit. The Master unit will handle zones one through four and the Slave unit will handle zones five through eight.

Configuring the ‘Master’ Unit (Zones One through Four):

1.Enable PROGRAM MODE (Make sure an LCKP4 Keypad is plugged into the Zone 1 Keypad port and the Keypad is ON).

2.Press the PROGRAM KEYPAD button on the front of the BXAUDIO4X4. a. Confirm the PROGRAM KEYPAD LED is illuminated GREEN.

3.Continuously press the EXPANSION button located on the front of the BXAUDIO4X4 until the Expansion LED turns RED.

4.The Unit is now configured as the MASTER Unit in Expanded mode.

© 2005 Xantech Corporation

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Installation Instructions Safety Instructions Read Before Operating Equipment Not Expose this Appliance to Rain or MoistureTable of Contents General Information CONTROLLER/AMPLIFIER Features Zone Features/SpecificationsEZProgramming Features Keypad FeaturesBXAUDIO4X4 CONTROLLER/AMPLIFIER Feature Descriptions Front PanelPGM/RUN Switch Zone LED’s System Status Power-Up ModeZone Status Operational Mode Program Keypad LED8Model BXAUDIO4X4 Model BXAUDIO4X4 BXAUDIO4X4 LC4KP Keypad Feature Descriptions Model BXAUDIO4X4 Keypad Rear Panel Features and Functions Model BXAUDIO4X4 Operation OUT-OF-THE-BOX InstallationExpanded System LC4KP Keypad Installation Instructions Source Label InstallationConnecting the Bxaudio System Source Component Connections Audio ConnectionsSense Input Connections CSM1 Threshold AdjustmentsSpeaker Connections AC Power Connections Control Out and Status ConnectionsControl Out Connections AT the Zone LocationOFF Extended Runs and Secondary Keypad In Zone BXAUDIO4X4/LC4KP Keypad CAT5 Cable LengthsSpeaker Connections Zone Enable / Disable Program Mode Planning the SystemProgramming Keypad Button with a Sequence of Commands Programming Keypad Buttons Single CommandsProgramming Button Layout Programming Toggle IR Commands Programming Timed DelaysDeleting a Macro Programming Source Power Management Party Mode Linking of Zones Deleting a Power Management MacroZone System -Expanded To Un-Link Zones Expansion Procedure Expanded Wiring ConnectionsConnecting the Bxaudio Controllers Combining IR OutputsEnabling Expansion Mode Configuring the ‘Master’ Unit Zones One through FourDisabling Expansion Mode Cloning the Bxaudio SystemInitializing the System Clearing ALL MACRO’S To Initialize the SystemOperating Instructions Change Sources Buttons 1 thruParty Mode IR Sensor SpecificationsGeneral Warranty Model BXAUDIO4X4 Xantech Corporation Xantech Corporation
Related manuals
Manual 2 pages 41.3 Kb

BXAUDIO4X4 specifications

The Xantech BXAUDIO4X4 is a powerful audio distribution system designed to meet the demands of modern multi-zone audio applications. This versatile device allows users to easily distribute high-quality audio signals from various sources to multiple zones throughout residential or commercial spaces. Its sleek design and advanced features make it a popular choice among audio professionals and enthusiasts alike.

One of the main features of the BXAUDIO4X4 is its ability to handle up to four audio sources and distribute them to four individual zones. This flexibility allows users to tailor their listening experience in each area, ensuring that everyone can enjoy their preferred audio content, whether it be music, podcasts, or live broadcasts. Each zone can be independently controlled, providing the ultimate convenience and customization.

In terms of technology, the BXAUDIO4X4 boasts built-in digital signal processing capabilities, which enhance the audio quality and ensure precise sound management. The device supports a variety of audio formats, making it compatible with numerous devices and sources, including streaming services, digital media players, and traditional audio equipment. Additionally, it features robust connection options, including XLR and RCA inputs, ensuring seamless integration into existing audio setups.

The BXAUDIO4X4 also includes user-friendly controls and an intuitive interface, making it easy for anyone to operate. The system can be controlled via a dedicated app, allowing users to adjust audio settings, select sources, and manage zones from their smartphones or tablets. This level of convenience is particularly valuable in larger spaces, where users may want to control audio without needing to access a central control point physically.

Another key characteristic of the BXAUDIO4X4 is its reliability and durability. Built to withstand the rigors of both residential and commercial environments, it features high-quality components that ensure long-lasting performance. The device is also designed for easy installation, with clear labeling and straightforward setup procedures that cater to both professional installers and DIY enthusiasts.

Overall, the Xantech BXAUDIO4X4 stands out as an exceptional audio distribution solution. With its robust features, advanced technologies, and user-centric design, it is an excellent choice for anyone looking to enhance their audio experience across multiple zones. Whether for entertaining guests, creating an immersive home theater, or managing sound in a commercial setting, the BXAUDIO4X4 delivers unparalleled performance and versatility.
Top Page Image Contents