Xantech BXAUDIO4X4 Expansion Procedure, Expanded Wiring Connections, Combining IR Outputs

Page 27

Model BXAUDIO4X4

Page: 27

SECTION 6.0: EXPANDING THE SYSTEM (Combining 2 BXAUDIO Controllers)

The BXAUDIO4X4 System can be expanded to up to eight-zones by linking two Controllers together with the included Expansion ‘Null-Modem’ Cable (Xantech PN#05913560).

Expansion Procedure:

When expanded the system the following steps must be taken in the following order:

1.Wiring the System (See Expanded Wiring Connections) Note: Do not connect the Expansion cable until after the Master Unit is programmed.

2.Enable Expansion Mode on both the ‘Master’ and ‘Slave’ unit.

3.Program the Master Unit as in Section 5.0

4.Copy (Clone) the Master Unit to the Slave Unit.

Additional Components Needed:

1.Xantech Model AV61 Audio/Video Six Way Distribution Amplifier. (Sold Separately) - This device allows the single A/V outputs of source components to be ‘actively’ split to the inputs of both BXAUDIO4X4 Controllers. System requirement: 1 per source. Note: Basic AUDIO RCA ‘Y’ Jacks may be used in-place of the AV61 Distribution Amplifiers if a passive audio splitter is acceptable.

2.Xantech Model 283TP Emitter ‘Combiner’. (Sold Separately) - This emitter is a single ‘Mouse’ Emitter with two diode-isolated 3.5mm plugs combining the Emitter Outputs of each BXAUDIO4X4 Controller Source Emitter Ports. System Requirement: 1 per source. Note: The 283TP Emitters will replace the 283M Emitters that come with the system.

EXPANDED WIRING CONNECTIONS

The Application Diagram, Figure 24, shows two BXAUDIO4X4 Controllers being used in a four-source, eight- zone system. Each of the source components, XDT Dual Tuner, SAT, CD have their A/V outputs running through an Audio Y-Cable to the Audio inputs on the two BXAUDIO4X4 Controllers. In this configuration, any one of the eight zones in the system can select and monitor any of the four sources program material. Note: AV61 Distribution Amplifier should be used if any loss or degradation in Audio signal is noticed.

Audio Connections

1.Connect the single-end of the Audio Y-Cable to the Left and Right output of Source 1.

2.Connect one of the Stereo Pairs of the ‘Y’ cable to the Source 1(Left and Right) Input RCA Jacks of the designated ‘MASTER’ BXAUDIO Controller.

3.Connect the remaining end of the ‘Y’ cable to the Source 1 (Left and Right) Input RCA Jacks of the designated ‘SLAVE’ BXAUDIO Controller

Combining IR Outputs

1.Using the 283TP Emitter, connect one of the 3.5mm Mono Mini plugs to the Source 1 Emitter Port of one of the BXAUDIO8X8 Controllers.

2.Connect the remaining 3.5mm Mono Mini plug into the Source 1 Emitter Port of the other BXAUDIO Controller.

3.Connect the Mouse Emitter end of the 283TP Emitter to the IR Sensor of the device connected to the Source 1 Audio input.

4.Repeat for Sources 2 through 4.

Connecting the BXAUDIO Controllers

Note: The following is to be done ‘after’ the MASTER unit is programmed.

1.Connect one end of the DB9 Expansion Cable to the rear DB9 connector on one of the BXAUDIO Controllers.

2.Connect the other end of the DB9 Expansion Cable to the rear DB9 connector of the remaining BXAUDIO Controller.

© 2005 Xantech Corporation

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Installation Instructions Not Expose this Appliance to Rain or Moisture Safety Instructions Read Before Operating EquipmentTable of Contents General Information Keypad Features CONTROLLER/AMPLIFIER FeaturesZone Features/Specifications EZProgramming FeaturesFront Panel BXAUDIO4X4 CONTROLLER/AMPLIFIER Feature DescriptionsProgram Keypad LED PGM/RUN SwitchZone LED’s System Status Power-Up Mode Zone Status Operational Mode8Model BXAUDIO4X4 Model BXAUDIO4X4 BXAUDIO4X4 LC4KP Keypad Feature Descriptions Model BXAUDIO4X4 Keypad Rear Panel Features and Functions Model BXAUDIO4X4 Installation Operation OUT-OF-THE-BOXExpanded System Source Component Connections Audio Connections LC4KP Keypad Installation InstructionsSource Label Installation Connecting the Bxaudio SystemCSM1 Threshold Adjustments Sense Input ConnectionsSpeaker Connections Connections AT the Zone Location AC Power ConnectionsControl Out and Status Connections Control OutOFF BXAUDIO4X4/LC4KP Keypad CAT5 Cable Lengths Extended Runs and Secondary Keypad In ZoneSpeaker Connections Zone Planning the System Enable / Disable Program ModeProgramming Keypad Buttons Single Commands Programming Keypad Button with a Sequence of CommandsProgramming Button Layout Programming Timed Delays Programming Toggle IR CommandsDeleting a Macro Programming Source Power Management Deleting a Power Management Macro Party Mode Linking of ZonesZone System -Expanded To Un-Link Zones Combining IR Outputs Expansion ProcedureExpanded Wiring Connections Connecting the Bxaudio ControllersConfiguring the ‘Master’ Unit Zones One through Four Enabling Expansion ModeCloning the Bxaudio System Disabling Expansion ModeTo Initialize the System Initializing the System Clearing ALL MACRO’SChange Sources Buttons 1 thru Operating InstructionsParty Mode Specifications IR SensorGeneral Warranty Model BXAUDIO4X4 Xantech Corporation Xantech Corporation
Related manuals
Manual 2 pages 41.3 Kb

BXAUDIO4X4 specifications

The Xantech BXAUDIO4X4 is a powerful audio distribution system designed to meet the demands of modern multi-zone audio applications. This versatile device allows users to easily distribute high-quality audio signals from various sources to multiple zones throughout residential or commercial spaces. Its sleek design and advanced features make it a popular choice among audio professionals and enthusiasts alike.

One of the main features of the BXAUDIO4X4 is its ability to handle up to four audio sources and distribute them to four individual zones. This flexibility allows users to tailor their listening experience in each area, ensuring that everyone can enjoy their preferred audio content, whether it be music, podcasts, or live broadcasts. Each zone can be independently controlled, providing the ultimate convenience and customization.

In terms of technology, the BXAUDIO4X4 boasts built-in digital signal processing capabilities, which enhance the audio quality and ensure precise sound management. The device supports a variety of audio formats, making it compatible with numerous devices and sources, including streaming services, digital media players, and traditional audio equipment. Additionally, it features robust connection options, including XLR and RCA inputs, ensuring seamless integration into existing audio setups.

The BXAUDIO4X4 also includes user-friendly controls and an intuitive interface, making it easy for anyone to operate. The system can be controlled via a dedicated app, allowing users to adjust audio settings, select sources, and manage zones from their smartphones or tablets. This level of convenience is particularly valuable in larger spaces, where users may want to control audio without needing to access a central control point physically.

Another key characteristic of the BXAUDIO4X4 is its reliability and durability. Built to withstand the rigors of both residential and commercial environments, it features high-quality components that ensure long-lasting performance. The device is also designed for easy installation, with clear labeling and straightforward setup procedures that cater to both professional installers and DIY enthusiasts.

Overall, the Xantech BXAUDIO4X4 stands out as an exceptional audio distribution solution. With its robust features, advanced technologies, and user-centric design, it is an excellent choice for anyone looking to enhance their audio experience across multiple zones. Whether for entertaining guests, creating an immersive home theater, or managing sound in a commercial setting, the BXAUDIO4X4 delivers unparalleled performance and versatility.
Top Page Image Contents