Xantech BXAUDIO4X4 installation instructions Programming Source Power Management

Page 24

Page: 24

 

 

 

Model BXAUDIO4X4

30

34

36

37

31

32

 

 

 

 

 

33

 

 

 

 

 

35

 

 

 

 

38

42

 

 

 

 

39

43

 

 

 

 

40

44

 

 

 

 

41

 

 

 

 

 

 

 

 

 

42

Programming Button Layout

PROGRAMMING SOURCE POWER MANAGEMENT

With the ability to turn the system ON and OFF from more than one location, the BXAUDIO4X4 Controller needs to know when the different sources are ON or OFF and be able to know when to send or not send power commands to keep the sources in sync with the system. The BXAUDIO4X4 Controller features a Current Sense input for each of the four Source Inputs. The optional CSM1 Current Sense Module is required for this feature.

This eliminates the need for programming Power Macro’s under each Keypads Source button or the need for discrete codes to assure the source components are in the proper Power State (toggle Power Commands can be used).

To program Power Management, complete the following procedure:

Note: The following procedure assumes the CSM1 Current Sense Module is in use and has been calibrated properly.

1.Enable PROGRAM MODE [11] (Make sure an LCKP4 Keypad is plugged into the Zone 1 Keypad port and the Keypad is ON).

2.Press the PROGRAM KEYPAD button [2] on the front of the BXAUDIO4X4.

a.Confirm the PROGRAM KEYPAD LED [11] is illuminated GREEN.

3.Press the POWER MANAGEMENT button once on the front of the BXAUDIO4X4 Controller [3]

a.The POWER MANAGEMENT LED [12] will turn GREEN signaling the system is in POWER ON programming mode.

4.Press the proper SOURCE BUTTON on the LC4KP Keypad for the Power Management codes to be programmed. Note: the ZONE LED’s 1 thru 4 [15] now will represent SOURCES 1 thru 4.

a.The STATUS LED will turn GREEN [14].

5.Aim the Manufactures Source Remote at the IR Learning eye on the front of the BXAUDIO4X4 [5].

6.Press and Release the corresponding POWER button on the devices remote.

Note: If discrete IR Codes are available for POWER ON and OFF teach the POWER ON command at this time otherwise use the single toggle Power Command.

7.If the code was learned correctly:

a.The STATUS LED [14] will turn OFF

b.PROGRAM KEYPAD LED [11] will remain GREEN

c.The Corresponding Source (Zone) LED [15] will Turn GREEN indicating a Power ON Macro was successfully recorded.

8.Press the POWER MANAGEMENT button once on the front of the BXAUDIO4X4 Controller [3]

a.The POWER MANAGEMENT LED [12] will turn RED signaling the system is in POWER OFF programming mode.

Note: If the POWER MANAGEMENT LED is still GREEN, press the button again until it changes to RED.

© 2005 Xantech Corporation

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Installation Instructions Safety Instructions Read Before Operating Equipment Not Expose this Appliance to Rain or MoistureTable of Contents General Information CONTROLLER/AMPLIFIER Features Zone Features/SpecificationsEZProgramming Features Keypad FeaturesBXAUDIO4X4 CONTROLLER/AMPLIFIER Feature Descriptions Front PanelPGM/RUN Switch Zone LED’s System Status Power-Up ModeZone Status Operational Mode Program Keypad LED8Model BXAUDIO4X4 Model BXAUDIO4X4 BXAUDIO4X4 LC4KP Keypad Feature Descriptions Model BXAUDIO4X4 Keypad Rear Panel Features and Functions Model BXAUDIO4X4 Installation Operation OUT-OF-THE-BOXExpanded System LC4KP Keypad Installation Instructions Source Label InstallationConnecting the Bxaudio System Source Component Connections Audio ConnectionsCSM1 Threshold Adjustments Sense Input ConnectionsSpeaker Connections AC Power Connections Control Out and Status ConnectionsControl Out Connections AT the Zone LocationOFF Extended Runs and Secondary Keypad In Zone BXAUDIO4X4/LC4KP Keypad CAT5 Cable LengthsSpeaker Connections Zone Enable / Disable Program Mode Planning the SystemProgramming Keypad Buttons Single Commands Programming Keypad Button with a Sequence of CommandsProgramming Button Layout Programming Timed Delays Programming Toggle IR CommandsDeleting a Macro Programming Source Power Management Deleting a Power Management Macro Party Mode Linking of ZonesZone System -Expanded To Un-Link Zones Expansion Procedure Expanded Wiring ConnectionsConnecting the Bxaudio Controllers Combining IR OutputsEnabling Expansion Mode Configuring the ‘Master’ Unit Zones One through FourDisabling Expansion Mode Cloning the Bxaudio SystemInitializing the System Clearing ALL MACRO’S To Initialize the SystemOperating Instructions Change Sources Buttons 1 thruParty Mode Specifications IR SensorGeneral Warranty Model BXAUDIO4X4 Xantech Corporation Xantech Corporation
Related manuals
Manual 2 pages 41.3 Kb

BXAUDIO4X4 specifications

The Xantech BXAUDIO4X4 is a powerful audio distribution system designed to meet the demands of modern multi-zone audio applications. This versatile device allows users to easily distribute high-quality audio signals from various sources to multiple zones throughout residential or commercial spaces. Its sleek design and advanced features make it a popular choice among audio professionals and enthusiasts alike.

One of the main features of the BXAUDIO4X4 is its ability to handle up to four audio sources and distribute them to four individual zones. This flexibility allows users to tailor their listening experience in each area, ensuring that everyone can enjoy their preferred audio content, whether it be music, podcasts, or live broadcasts. Each zone can be independently controlled, providing the ultimate convenience and customization.

In terms of technology, the BXAUDIO4X4 boasts built-in digital signal processing capabilities, which enhance the audio quality and ensure precise sound management. The device supports a variety of audio formats, making it compatible with numerous devices and sources, including streaming services, digital media players, and traditional audio equipment. Additionally, it features robust connection options, including XLR and RCA inputs, ensuring seamless integration into existing audio setups.

The BXAUDIO4X4 also includes user-friendly controls and an intuitive interface, making it easy for anyone to operate. The system can be controlled via a dedicated app, allowing users to adjust audio settings, select sources, and manage zones from their smartphones or tablets. This level of convenience is particularly valuable in larger spaces, where users may want to control audio without needing to access a central control point physically.

Another key characteristic of the BXAUDIO4X4 is its reliability and durability. Built to withstand the rigors of both residential and commercial environments, it features high-quality components that ensure long-lasting performance. The device is also designed for easy installation, with clear labeling and straightforward setup procedures that cater to both professional installers and DIY enthusiasts.

Overall, the Xantech BXAUDIO4X4 stands out as an exceptional audio distribution solution. With its robust features, advanced technologies, and user-centric design, it is an excellent choice for anyone looking to enhance their audio experience across multiple zones. Whether for entertaining guests, creating an immersive home theater, or managing sound in a commercial setting, the BXAUDIO4X4 delivers unparalleled performance and versatility.
Top Page Image Contents