Xantech BXAUDIO4X4 CONTROLLER/AMPLIFIER Feature Descriptions, Front Panel

Page 6

Page: 6

Model BXAUDIO4X4

SECTION 2.0: BXAUDIO4X4 CONTROLLER/AMPLIFIER FEATURE DESCRIPTIONS

1

Figure 1 – Front Panel

Figure 2 – The Model BXAUDIO4X4 Controller/Amplifier – Front Panel Features and Functions

1.Front Panel Cover. Snap-in panel decorative panel that covers XPS™ Programming Controls.

2.Program Keypad Button. Activates Program Keypad mode When RUN/PGM switch is set to PGM.

3.Power Management Button. Enables and Disables Intelligent Power Management. When in Program Keypad Mode, press once to program a Sources POWER ON Macro (Power Management LED - Item 12 - turns GREEN) and twice to program a Sources POWER OFF Macro (Power Management LED turns RED).

4.Expansion Mode (Master/Slave Select) Button. Enables/Disables Expansion Mode and also sets BXAudio Controller to either a MASTER or SLAVE.

5.IR Learning Eye. Allows for XPS™ (Xantech Point and Shoot) teaching of IR Codes directly to the BXAudio System when Program Mode is active.

6.Toggle Button. When pressed during Program Keypad Mode, system will set XPS™ IR Learning to TOGGLE Command learn mode (should only be activated after first command of the Toggle Pair is already successfully learned).

© 2005 Xantech Corporation

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Installation Instructions Safety Instructions Read Before Operating Equipment Not Expose this Appliance to Rain or MoistureTable of Contents General Information EZProgramming Features CONTROLLER/AMPLIFIER FeaturesZone Features/Specifications Keypad FeaturesBXAUDIO4X4 CONTROLLER/AMPLIFIER Feature Descriptions Front PanelZone Status Operational Mode PGM/RUN SwitchZone LED’s System Status Power-Up Mode Program Keypad LED8Model BXAUDIO4X4 Model BXAUDIO4X4 BXAUDIO4X4 LC4KP Keypad Feature Descriptions Model BXAUDIO4X4 Keypad Rear Panel Features and Functions Model BXAUDIO4X4 Installation Operation OUT-OF-THE-BOXExpanded System Connecting the Bxaudio System LC4KP Keypad Installation InstructionsSource Label Installation Source Component Connections Audio ConnectionsCSM1 Threshold Adjustments Sense Input ConnectionsSpeaker Connections Control Out AC Power ConnectionsControl Out and Status Connections Connections AT the Zone LocationOFF Extended Runs and Secondary Keypad In Zone BXAUDIO4X4/LC4KP Keypad CAT5 Cable LengthsSpeaker Connections Zone Enable / Disable Program Mode Planning the SystemProgramming Keypad Buttons Single Commands Programming Keypad Button with a Sequence of CommandsProgramming Button Layout Programming Timed Delays Programming Toggle IR CommandsDeleting a Macro Programming Source Power Management Deleting a Power Management Macro Party Mode Linking of ZonesZone System -Expanded To Un-Link Zones Connecting the Bxaudio Controllers Expansion ProcedureExpanded Wiring Connections Combining IR OutputsEnabling Expansion Mode Configuring the ‘Master’ Unit Zones One through FourDisabling Expansion Mode Cloning the Bxaudio SystemInitializing the System Clearing ALL MACRO’S To Initialize the SystemOperating Instructions Change Sources Buttons 1 thruParty Mode Specifications IR SensorGeneral Warranty Model BXAUDIO4X4 Xantech Corporation Xantech Corporation
Related manuals
Manual 2 pages 41.3 Kb

BXAUDIO4X4 specifications

The Xantech BXAUDIO4X4 is a powerful audio distribution system designed to meet the demands of modern multi-zone audio applications. This versatile device allows users to easily distribute high-quality audio signals from various sources to multiple zones throughout residential or commercial spaces. Its sleek design and advanced features make it a popular choice among audio professionals and enthusiasts alike.

One of the main features of the BXAUDIO4X4 is its ability to handle up to four audio sources and distribute them to four individual zones. This flexibility allows users to tailor their listening experience in each area, ensuring that everyone can enjoy their preferred audio content, whether it be music, podcasts, or live broadcasts. Each zone can be independently controlled, providing the ultimate convenience and customization.

In terms of technology, the BXAUDIO4X4 boasts built-in digital signal processing capabilities, which enhance the audio quality and ensure precise sound management. The device supports a variety of audio formats, making it compatible with numerous devices and sources, including streaming services, digital media players, and traditional audio equipment. Additionally, it features robust connection options, including XLR and RCA inputs, ensuring seamless integration into existing audio setups.

The BXAUDIO4X4 also includes user-friendly controls and an intuitive interface, making it easy for anyone to operate. The system can be controlled via a dedicated app, allowing users to adjust audio settings, select sources, and manage zones from their smartphones or tablets. This level of convenience is particularly valuable in larger spaces, where users may want to control audio without needing to access a central control point physically.

Another key characteristic of the BXAUDIO4X4 is its reliability and durability. Built to withstand the rigors of both residential and commercial environments, it features high-quality components that ensure long-lasting performance. The device is also designed for easy installation, with clear labeling and straightforward setup procedures that cater to both professional installers and DIY enthusiasts.

Overall, the Xantech BXAUDIO4X4 stands out as an exceptional audio distribution solution. With its robust features, advanced technologies, and user-centric design, it is an excellent choice for anyone looking to enhance their audio experience across multiple zones. Whether for entertaining guests, creating an immersive home theater, or managing sound in a commercial setting, the BXAUDIO4X4 delivers unparalleled performance and versatility.
Top Page Image Contents