Xantech BXAUDIO4X4 installation instructions Disabling Expansion Mode, Cloning the Bxaudio System

Page 29

Model BXAUDIO4X4

 

 

 

Page: 29

30

34

36

37

31

32

 

 

 

 

 

33

 

 

 

 

 

35

 

 

 

 

38

42

 

 

 

 

39

43

 

 

 

 

40

44

 

 

 

 

41

 

 

 

 

 

 

 

 

 

42

Programming Button Layout

Configuring the ‘Slave’ Unit (Zones Five through Eight):

1.Enable PROGRAM MODE (Make sure an LCKP4 Keypad is plugged into the Zone 1 Keypad port and the Keypad is ON).

2.Press the PROGRAM KEYPAD button on the front of the BXAUDIO4X4. a. Confirm the PROGRAM KEYPAD LED is illuminated GREEN.

3.Continuously press the EXPANSION button located on the front of the BXAUDIO4X4 until the Expansion LED turns ORANGE.

4.The Unit is now configured as the SLAVE Unit in Expanded mode.

DISABLING EXPANSION MODE

To disable Expansion Mode:

1.Enable PROGRAM MODE (Make sure an LCKP4 Keypad is plugged into the Zone 1 Keypad port and the Keypad is ON).

2.Press the PROGRAM KEYPAD button on the front of the BXAUDIO4X4. a. Confirm the PROGRAM KEYPAD LED is illuminated GREEN.

3.Continuously press the EXPANSION button located on the front of the BXAUDIO4X4 until the Expansion LED turns OFF.

4.Expanded mode is now DISABLED.

CLONING THE BXAUDIO SYSTEM

Cloning is used for copying a project from one unit to another. This is needed when operating in EXPANDED mode but can be used any time a project wants to be copied from one unit to another.

When in EXPANDED mode, after the Master unit is programmed, the system can be ‘cloned’ (copied) into the Slave unit for ease of programming.

To CLONE a unit:

1.Place the designated SLAVE (unit to be cloned to) into Expansion Mode as explained above.

2.Power down the MASTER and SLAVE units.

3.Connect the Expansion Cable to the MASTER and SLAVE units.

4.Power up the MASTER unit.

5.Place the MASTER unit in Programming Mode.

6.Power down MASTER unit.

7.Press and hold the PROGRAMMING KEYPAD button.

8.Power up the MASTER unit.

© 2005 Xantech Corporation

Page 28 Page 30
Image 29
Page 28 Page 30
Contents Installation Instructions Not Expose this Appliance to Rain or Moisture Safety Instructions Read Before Operating EquipmentTable of Contents General Information Zone Features/Specifications CONTROLLER/AMPLIFIER FeaturesEZProgramming Features Keypad FeaturesFront Panel BXAUDIO4X4 CONTROLLER/AMPLIFIER Feature DescriptionsZone LED’s System Status Power-Up Mode PGM/RUN SwitchZone Status Operational Mode Program Keypad LED8Model BXAUDIO4X4 Model BXAUDIO4X4 BXAUDIO4X4 LC4KP Keypad Feature Descriptions Model BXAUDIO4X4 Keypad Rear Panel Features and Functions Model BXAUDIO4X4 Expanded System InstallationOperation OUT-OF-THE-BOX Source Label Installation LC4KP Keypad Installation InstructionsConnecting the Bxaudio System Source Component Connections Audio ConnectionsSpeaker Connections CSM1 Threshold AdjustmentsSense Input Connections Control Out and Status Connections AC Power ConnectionsControl Out Connections AT the Zone LocationOFF BXAUDIO4X4/LC4KP Keypad CAT5 Cable Lengths Extended Runs and Secondary Keypad In ZoneSpeaker Connections Zone Planning the System Enable / Disable Program ModeProgramming Button Layout Programming Keypad Buttons Single CommandsProgramming Keypad Button with a Sequence of Commands Deleting a Macro Programming Timed DelaysProgramming Toggle IR Commands Programming Source Power Management Zone System -Expanded Deleting a Power Management MacroParty Mode Linking of Zones To Un-Link Zones Expanded Wiring Connections Expansion ProcedureConnecting the Bxaudio Controllers Combining IR OutputsConfiguring the ‘Master’ Unit Zones One through Four Enabling Expansion ModeCloning the Bxaudio System Disabling Expansion ModeTo Initialize the System Initializing the System Clearing ALL MACRO’SChange Sources Buttons 1 thru Operating InstructionsParty Mode General SpecificationsIR Sensor Warranty Model BXAUDIO4X4 Xantech Corporation Xantech Corporation
Related manuals
Manual 2 pages 41.3 Kb

BXAUDIO4X4 specifications

The Xantech BXAUDIO4X4 is a powerful audio distribution system designed to meet the demands of modern multi-zone audio applications. This versatile device allows users to easily distribute high-quality audio signals from various sources to multiple zones throughout residential or commercial spaces. Its sleek design and advanced features make it a popular choice among audio professionals and enthusiasts alike.

One of the main features of the BXAUDIO4X4 is its ability to handle up to four audio sources and distribute them to four individual zones. This flexibility allows users to tailor their listening experience in each area, ensuring that everyone can enjoy their preferred audio content, whether it be music, podcasts, or live broadcasts. Each zone can be independently controlled, providing the ultimate convenience and customization.

In terms of technology, the BXAUDIO4X4 boasts built-in digital signal processing capabilities, which enhance the audio quality and ensure precise sound management. The device supports a variety of audio formats, making it compatible with numerous devices and sources, including streaming services, digital media players, and traditional audio equipment. Additionally, it features robust connection options, including XLR and RCA inputs, ensuring seamless integration into existing audio setups.

The BXAUDIO4X4 also includes user-friendly controls and an intuitive interface, making it easy for anyone to operate. The system can be controlled via a dedicated app, allowing users to adjust audio settings, select sources, and manage zones from their smartphones or tablets. This level of convenience is particularly valuable in larger spaces, where users may want to control audio without needing to access a central control point physically.

Another key characteristic of the BXAUDIO4X4 is its reliability and durability. Built to withstand the rigors of both residential and commercial environments, it features high-quality components that ensure long-lasting performance. The device is also designed for easy installation, with clear labeling and straightforward setup procedures that cater to both professional installers and DIY enthusiasts.

Overall, the Xantech BXAUDIO4X4 stands out as an exceptional audio distribution solution. With its robust features, advanced technologies, and user-centric design, it is an excellent choice for anyone looking to enhance their audio experience across multiple zones. Whether for entertaining guests, creating an immersive home theater, or managing sound in a commercial setting, the BXAUDIO4X4 delivers unparalleled performance and versatility.
Top Page Image Contents