Xantech BXAUDIO4X4 installation instructions Off

Page 17

Model BXAUDIO4X4

Page: 17

 

Primary Keypad

 

Secondary Keypad

Application

Secondary

Zone

Sensor

Secondary

Zone

Sensor

Keypad

Termination

Enable

Keypad

Termination

Enable

 

One keypad in Zone with IR

OFF

ON

ON

 

 

 

Sensor enabled

 

 

 

 

 

 

 

 

 

Two Keypads in Zone with IR

OFF

OFF

ON

ON

ON

ON

Sensors enabled

 

 

 

 

 

 

One Keypad and one separate

OFF

ON

OFF

 

 

 

IR Receiver in Zone

 

 

 

 

 

 

 

 

 

Two Keypads and two separate

OFF

OFF

OFF

ON

ON

OFF

IR Receivers in Zone (Sub-

Zone)

 

 

 

 

 

 

Table 1 – LC4KP Keypad Jumper Configurations

Multiple Keypad Connections

1.For a second keypad in the same zone, terminate the CAT5 cable in the same way as shown in Figure 10.

2.Connect the CAT5 coming from the BXAUDIO4X4 Controller to the “CONTROLLER” jack on the Primary Keypad. Plug a CAT5 cable into the “EXPANSION” jack on the Primary Keypad and connect it to the “CONTROLLER” jack on the Secondary Keypad. Set the jumpers according to the above Table 1.

3.When adding an IR receiver in the zone, set the jumpers according to the above table and connect the cables as shown in Figure 10.

© 2005 Xantech Corporation

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Installation Instructions Not Expose this Appliance to Rain or Moisture Safety Instructions Read Before Operating EquipmentTable of Contents General Information Zone Features/Specifications CONTROLLER/AMPLIFIER FeaturesEZProgramming Features Keypad FeaturesFront Panel BXAUDIO4X4 CONTROLLER/AMPLIFIER Feature DescriptionsZone LED’s System Status Power-Up Mode PGM/RUN SwitchZone Status Operational Mode Program Keypad LED8Model BXAUDIO4X4 Model BXAUDIO4X4 BXAUDIO4X4 LC4KP Keypad Feature Descriptions Model BXAUDIO4X4 Keypad Rear Panel Features and Functions Model BXAUDIO4X4 Expanded System InstallationOperation OUT-OF-THE-BOX Source Label Installation LC4KP Keypad Installation InstructionsConnecting the Bxaudio System Source Component Connections Audio ConnectionsSpeaker Connections CSM1 Threshold AdjustmentsSense Input Connections Control Out and Status Connections AC Power ConnectionsControl Out Connections AT the Zone LocationOFF BXAUDIO4X4/LC4KP Keypad CAT5 Cable Lengths Extended Runs and Secondary Keypad In ZoneSpeaker Connections Zone Planning the System Enable / Disable Program ModeProgramming Button Layout Programming Keypad Buttons Single CommandsProgramming Keypad Button with a Sequence of Commands Deleting a Macro Programming Timed DelaysProgramming Toggle IR Commands Programming Source Power Management Zone System -Expanded Deleting a Power Management MacroParty Mode Linking of Zones To Un-Link Zones Expanded Wiring Connections Expansion ProcedureConnecting the Bxaudio Controllers Combining IR OutputsConfiguring the ‘Master’ Unit Zones One through Four Enabling Expansion ModeCloning the Bxaudio System Disabling Expansion ModeTo Initialize the System Initializing the System Clearing ALL MACRO’SChange Sources Buttons 1 thru Operating InstructionsParty Mode General SpecificationsIR Sensor Warranty Model BXAUDIO4X4 Xantech Corporation Xantech Corporation
Related manuals
Manual 2 pages 41.3 Kb

BXAUDIO4X4 specifications

The Xantech BXAUDIO4X4 is a powerful audio distribution system designed to meet the demands of modern multi-zone audio applications. This versatile device allows users to easily distribute high-quality audio signals from various sources to multiple zones throughout residential or commercial spaces. Its sleek design and advanced features make it a popular choice among audio professionals and enthusiasts alike.

One of the main features of the BXAUDIO4X4 is its ability to handle up to four audio sources and distribute them to four individual zones. This flexibility allows users to tailor their listening experience in each area, ensuring that everyone can enjoy their preferred audio content, whether it be music, podcasts, or live broadcasts. Each zone can be independently controlled, providing the ultimate convenience and customization.

In terms of technology, the BXAUDIO4X4 boasts built-in digital signal processing capabilities, which enhance the audio quality and ensure precise sound management. The device supports a variety of audio formats, making it compatible with numerous devices and sources, including streaming services, digital media players, and traditional audio equipment. Additionally, it features robust connection options, including XLR and RCA inputs, ensuring seamless integration into existing audio setups.

The BXAUDIO4X4 also includes user-friendly controls and an intuitive interface, making it easy for anyone to operate. The system can be controlled via a dedicated app, allowing users to adjust audio settings, select sources, and manage zones from their smartphones or tablets. This level of convenience is particularly valuable in larger spaces, where users may want to control audio without needing to access a central control point physically.

Another key characteristic of the BXAUDIO4X4 is its reliability and durability. Built to withstand the rigors of both residential and commercial environments, it features high-quality components that ensure long-lasting performance. The device is also designed for easy installation, with clear labeling and straightforward setup procedures that cater to both professional installers and DIY enthusiasts.

Overall, the Xantech BXAUDIO4X4 stands out as an exceptional audio distribution solution. With its robust features, advanced technologies, and user-centric design, it is an excellent choice for anyone looking to enhance their audio experience across multiple zones. Whether for entertaining guests, creating an immersive home theater, or managing sound in a commercial setting, the BXAUDIO4X4 delivers unparalleled performance and versatility.
Top Page Image Contents