Xantech BXAUDIO4X4 CONTROLLER/AMPLIFIER Features, Central Processor, Zone Features/Specifications

Page 5

Model BXAUDIO4X4

Page: 5

CONTROLLER/AMPLIFIER FEATURES

Central Processor

•Four Audio Source Inputs

•Current sensing (>20mA-<10A) for each input for power management of common source components and using the optional CSM1 Current Sense Module

•Four source specific IR emitter ports and one common IR output.

•Internal memory (96 Kbytes non-volatile flash) for storing IR codes.

•Programmable via EZProgramming™

•Recognizes Xantech RC68+ Commands for wireless IR Zone and Source control (RC68+ Group Code 48)

•Outputs single IR commands or IR sequences.

•Sends "busy" signal to keypads when system is active.

•IR learning eye on front panel of Controller/Amplifier used for source component macro programming

•DB-9 RS232 Serial port for programming, expansion and upgrading firmware (Future Proof).

•Also available in 230 VAC / 50 Hz. (Part No. BXAUDIO4X4-77SYS)

Zone Features/Specifications

•Each zone has 1 RJ45 connector for BXAUDIO4X4 keypad, 1 speaker-pair terminal and a 12VDC status output.

•Party Mode: Multiple zones can be linked to behave as one zone.

•25 Watts per channel (rated at 8-Ohm; 4-Ohm safe).

•Frequency response: 12 Hz to 55KHz (±3dB)

•THD: <0.08%.

•Signal-to-noise ratio: > 96dB A-weighted

EZProgramming™ Features:

•No PC Required.

•Front Panel programming of all IR codes for control of source components.

•Program sequences of up to 40 IR codes per button.

•Incorporate delays in sequences to allow for amplifier power-up, light dimming, screen drop, drape closure, etc.

•Intelligent Power Management: Automatically keeps Source Components in sync with Zone power status (Requires CSM1 Current Sense Module).

KEYPAD FEATURES

•Flush-mount, snap-in wall unit. Fits into standard Dual-Gang J-Box with universal wall mounting plate.

•16 buttons (4 source select, 11 function, 1 power).

•Backlit buttons.

•Bi-colored Status LED for power and status.

•Broadband IR receiver (30KHz to 100KHz).

•Connects to BXAUDIO4X4 Controller/Amplifier via CAT5 cable with RJ45 connectors.

•Two RJ45 connectors allow two keypads per zone.

© 2005 Xantech Corporation

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Installation Instructions Not Expose this Appliance to Rain or Moisture Safety Instructions Read Before Operating EquipmentTable of Contents General Information Zone Features/Specifications CONTROLLER/AMPLIFIER FeaturesEZProgramming Features Keypad FeaturesFront Panel BXAUDIO4X4 CONTROLLER/AMPLIFIER Feature DescriptionsZone LED’s System Status Power-Up Mode PGM/RUN SwitchZone Status Operational Mode Program Keypad LED8Model BXAUDIO4X4 Model BXAUDIO4X4 BXAUDIO4X4 LC4KP Keypad Feature Descriptions Model BXAUDIO4X4 Keypad Rear Panel Features and Functions Model BXAUDIO4X4 Expanded System InstallationOperation OUT-OF-THE-BOX Source Label Installation LC4KP Keypad Installation InstructionsConnecting the Bxaudio System Source Component Connections Audio ConnectionsSpeaker Connections CSM1 Threshold AdjustmentsSense Input Connections Control Out and Status Connections AC Power ConnectionsControl Out Connections AT the Zone LocationOFF BXAUDIO4X4/LC4KP Keypad CAT5 Cable Lengths Extended Runs and Secondary Keypad In ZoneSpeaker Connections Zone Planning the System Enable / Disable Program ModeProgramming Button Layout Programming Keypad Buttons Single CommandsProgramming Keypad Button with a Sequence of Commands Deleting a Macro Programming Timed DelaysProgramming Toggle IR Commands Programming Source Power Management Zone System -Expanded Deleting a Power Management MacroParty Mode Linking of Zones To Un-Link Zones Expanded Wiring Connections Expansion ProcedureConnecting the Bxaudio Controllers Combining IR OutputsConfiguring the ‘Master’ Unit Zones One through Four Enabling Expansion ModeCloning the Bxaudio System Disabling Expansion ModeTo Initialize the System Initializing the System Clearing ALL MACRO’SChange Sources Buttons 1 thru Operating InstructionsParty Mode General SpecificationsIR Sensor Warranty Model BXAUDIO4X4 Xantech Corporation Xantech Corporation
Related manuals
Manual 2 pages 41.3 Kb

BXAUDIO4X4 specifications

The Xantech BXAUDIO4X4 is a powerful audio distribution system designed to meet the demands of modern multi-zone audio applications. This versatile device allows users to easily distribute high-quality audio signals from various sources to multiple zones throughout residential or commercial spaces. Its sleek design and advanced features make it a popular choice among audio professionals and enthusiasts alike.

One of the main features of the BXAUDIO4X4 is its ability to handle up to four audio sources and distribute them to four individual zones. This flexibility allows users to tailor their listening experience in each area, ensuring that everyone can enjoy their preferred audio content, whether it be music, podcasts, or live broadcasts. Each zone can be independently controlled, providing the ultimate convenience and customization.

In terms of technology, the BXAUDIO4X4 boasts built-in digital signal processing capabilities, which enhance the audio quality and ensure precise sound management. The device supports a variety of audio formats, making it compatible with numerous devices and sources, including streaming services, digital media players, and traditional audio equipment. Additionally, it features robust connection options, including XLR and RCA inputs, ensuring seamless integration into existing audio setups.

The BXAUDIO4X4 also includes user-friendly controls and an intuitive interface, making it easy for anyone to operate. The system can be controlled via a dedicated app, allowing users to adjust audio settings, select sources, and manage zones from their smartphones or tablets. This level of convenience is particularly valuable in larger spaces, where users may want to control audio without needing to access a central control point physically.

Another key characteristic of the BXAUDIO4X4 is its reliability and durability. Built to withstand the rigors of both residential and commercial environments, it features high-quality components that ensure long-lasting performance. The device is also designed for easy installation, with clear labeling and straightforward setup procedures that cater to both professional installers and DIY enthusiasts.

Overall, the Xantech BXAUDIO4X4 stands out as an exceptional audio distribution solution. With its robust features, advanced technologies, and user-centric design, it is an excellent choice for anyone looking to enhance their audio experience across multiple zones. Whether for entertaining guests, creating an immersive home theater, or managing sound in a commercial setting, the BXAUDIO4X4 delivers unparalleled performance and versatility.
Top Page Image Contents