After Fryers Are Under The Fry Station Hood

2.2After Fryers Are Under The Fry Station Hood

Adjust casters so that fryers are level and at the proper height in the fry station hood. If necessary, level the fryer(s) by loosening the locking screw on the caster leg and screwing the caster in or out. When fryer is level and at proper height, retighten the locking screw on the caster leg.

Secure the fryer in place under the hood with the restraining hardware installed with the hood.

2.3Power Requirements

DANGER

Copper wire suitable for at least 167°F (75°C) MUST be used for power connections.

			WIRE	MIN.	AWG	AMPS PER LEG
MODEL	VOLTAGE	PHASE	SERVICE	SIZE	(mm2)	L1	L2	L3
H14	208	3	3	6	(16)	39	39	39
H14	240	3	3	6	(16)	34	34	34
H14	480	3	3	8	(10)	17	17	17
H14	220/380	3	4	6	(16)	21	21	21
H14	240/415	3	4	6	(16)	20	20	21
H14	230/400	3	4	6	(16)	21	21	21
ALL	208	3	3	6	(16)	39	39	39
14 SERIES	240	3	3	6	(16)	34	34	34
EPRI	220/380	3	4	6	(16)	21	21	21
UNITS	240/415	3	4	6	(16)	20	20	20

DANGER

The electrical power supply for this appliance MUST be the same as indicated on

the rating and serial number plate located on the inside of the fryer door.

DANGER

This appliance MUST be connected to the voltage and phase as specified on the

rating and serial-number plate located on the inside of the fryer door.

DANGER

All wiring connections for this appliance MUST be made in accordance with the wiring diagrams furnished with the equipment. Wiring diagrams are located on the inside of the fryer door.

2–2