Frymaster BIH1721, FPH1721 manual

EH1721 SERIES ELECTRIC FRYERS

CHAPTER 2: INSTALLATION INSTRUCTIONS

2.1 General

Proper installation is essential for the safe, efficient, trouble-free operation of this appliance.

Qualified, licensed, and/or authorized installation or service personnel, as defined in Section 1.7 of this manual, should perform all installation and service on Frymaster equipment.

Failure to use qualified, licensed, and/or authorized installation or service personnel (as defined in Section 1.7 of this manual) to install or otherwise service this equipment will void the Frymaster warranty and may result in damage to the equipment or injury to personnel.

Where conflicts exist between instructions and information in this manual and local or national codes or regulations, installation and operation shall comply with the codes or regulations in force in the country in which the equipment is installed.

Service may be obtained by contacting your local Factory Authorized Service Center.

NOTICE

All fryers shipped without factory supplied cords and plug assemblies must be hardwired using flexible conduit to the terminal block located on the rear of the fryer. These fryers should be wired to NEC specifications. Hardwired units must include installation of restraint devices.

DANGER

Adequate means must be provided to limit the movement of this appliance without depending on or transmitting stress to the electrical conduit. A restraint kit is provided with the fryer. If the restraint kit is missing contact your local Frymaster Factory Authorized Service Center (FASC) for part number 826-0900.

NOTICE

If this equipment is wired directly into the electrical power supply, a means for disconnection from the supply having a contact separation of at least 3-mm in all poles must be incorporated in the fixed wiring.

NOTICE

This equipment must be positioned so that the plug is accessible unless other means for disconnection from the power supply (e.g., a circuit breaker) is provided.

DANGER

The electrical power supply for this appliance MUST be the same as indicated on the rating and serial number plate located on the inside of the fryer door.

NOTICE

If this appliance is permanently connected to fixed wiring, it MUST be connected by means of copper wires having a temperature rating of not less than 167°F (75°C).

2-2

FPH1721, BIH1721 specifications

The Frymaster FPH1721 and BIH1721 are modern deep frying solutions, specifically engineered for performance, efficiency, and ease of use. These fryers are designed to meet the rigorous demands of commercial kitchens while maintaining consistency in cooking quality.

One of the main features of the Frymaster FPH1721 is its innovative design, which allows for outstanding frying efficiency. The fryer utilizes a patented four-pass heat exchange system, ensuring optimal heat transfer and faster recovery times. This means that when food is placed in the fryer, the temperature of the oil remains stable, providing even cooking and reducing the risk of oil degradation.

The BIH1721 model incorporates an impressive oil filtration system that not only extends the life of the cooking oil but also enhances food quality. This built-in filtration system processes oil while the fryer is in use, ensuring that food particles and impurities are continuously removed, leading to cleaner frying results and improved taste.

In addition to these features, another advantage of the FPH1721 and BIH1721 models is their user-friendly digital control system. This intuitive interface allows operators to easily set and monitor cooking times, temperatures, and oil usage, making it simple to achieve consistent results without extensive training. The programmable feature also allows users to save specific cooking profiles, further enhancing efficiency and productivity in the kitchen.

Both fryers are constructed using high-quality materials to endure the demands of high-volume frying operations. The stainless steel exterior not only ensures durability but also simplifies cleaning. The fryers are designed with safety in mind, featuring protected heating elements and front-mounted oil drains that allow for safe and easy maintenance.

Overall, the Frymaster FPH1721 and BIH1721 models represent a blend of advanced technology and practical features. Their efficient operation, innovative filtration system, and user-friendly controls make them essential kitchen equipment for restaurants and businesses looking to deliver high-quality fried foods. These fryers are a testament to Frymaster's commitment to providing solutions that empower commercial kitchens to operate at peak performance.