Frymaster BIH1721, FPH1721 operation manual Computer Information, Shipping Damage Claim Procedure

Page 6

EH1721 SERIES ELECTRIC FRYERS

CHAPTER 1: INTRODUCTION

1.3 Computer Information

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. While this device is a verified Class A device, it has been shown to meet the Class B limits. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of the equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at their own expense.

The user is cautioned that any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

If necessary, the user should consult the dealer or an experienced radio and television technician for additional suggestions.

The user may find the following booklet prepared by the Federal Communications Commission helpful: "How to Identify and Resolve Radio-TV Interference Problems". This booklet is available from the U.S. Government Printing Office, Washington, DC 20402, Stock No. 004-000-00345-4.

1.4 Shipping Damage Claim Procedure

What to do if your equipment arrives damaged:

Please note that this equipment was carefully inspected and packed by skilled personnel before leaving the factory. The freight company assumes full responsibility for safe delivery upon acceptance of the equipment.

1.File Claim for Damages Immediately—Regardless of extent of damage.

2.Visible Loss or Damage—Be sure this is noted on the freight bill or express receipt and is signed by the person making the delivery.

3.Concealed Loss or Damage—If damage is unnoticed until equipment is unpacked, notify the freight company or carrier immediately and file a concealed damage claim. This should be done within 15 days of date of delivery. Be sure to retain container for inspection.

1-2

Image 6
Contents Hour Service Hotline EH1721, BIH1721 & FPH1721 SeriesApril Canada Page Table of Contents Safety Information GeneralShipping Damage Claim Procedure Computer InformationService Information After PurchaseService Personnel DefinitionsEH1721 Series Electric Fryers Installation Instructions EH1721 Series Electric Fryers Installation Instructions Electrical Grounding Requirements Do not block the area around the base or under the fryersFryer Installation Australian RequirementsPower Requirements Model Voltage Phase Wire MIN AWG Amps PER LEG Service SizeFrypot Boil Out Equipment Setup and Shutdown Procedures ShutdownCleaning Fryer Clean Inside and Outside of Fryer Cabinet- DailyEH1721 Series Electric Fryers Preventative Maintenance Periodic/Annual Maintenance Built-in FiltrationStainless Steel Care Filtration Preparation Assembling the FilterDaily Filtration Operation Filtering ToolsOperating the Filter Pan PreparationPlace the filter paper over top of pan EH1721 Series Electric Fryers BUILT-IN Filtration Replace the crumb tray in the pan Filter Operation Frypot refilling with filtered oil EH1721 Series Electric Fryers BUILT-IN Filtration Drain-flush handle blue location EH1721 Series Electric Fryers Operator Troubleshooting IntroductionTroubleshooting ActivateControl and Heating Problems Probable CausesOpen Drain Error Messages and Display Problems Probable Causes Basket Lift Problems Probable CausesBuilt-in Filtration Problems Probable Causes Filter pump won’t Recommended Spare Parts Service Hotline

FPH1721, BIH1721 specifications

The Frymaster FPH1721 and BIH1721 are modern deep frying solutions, specifically engineered for performance, efficiency, and ease of use. These fryers are designed to meet the rigorous demands of commercial kitchens while maintaining consistency in cooking quality.

One of the main features of the Frymaster FPH1721 is its innovative design, which allows for outstanding frying efficiency. The fryer utilizes a patented four-pass heat exchange system, ensuring optimal heat transfer and faster recovery times. This means that when food is placed in the fryer, the temperature of the oil remains stable, providing even cooking and reducing the risk of oil degradation.

The BIH1721 model incorporates an impressive oil filtration system that not only extends the life of the cooking oil but also enhances food quality. This built-in filtration system processes oil while the fryer is in use, ensuring that food particles and impurities are continuously removed, leading to cleaner frying results and improved taste.

In addition to these features, another advantage of the FPH1721 and BIH1721 models is their user-friendly digital control system. This intuitive interface allows operators to easily set and monitor cooking times, temperatures, and oil usage, making it simple to achieve consistent results without extensive training. The programmable feature also allows users to save specific cooking profiles, further enhancing efficiency and productivity in the kitchen.

Both fryers are constructed using high-quality materials to endure the demands of high-volume frying operations. The stainless steel exterior not only ensures durability but also simplifies cleaning. The fryers are designed with safety in mind, featuring protected heating elements and front-mounted oil drains that allow for safe and easy maintenance.

Overall, the Frymaster FPH1721 and BIH1721 models represent a blend of advanced technology and practical features. Their efficient operation, innovative filtration system, and user-friendly controls make them essential kitchen equipment for restaurants and businesses looking to deliver high-quality fried foods. These fryers are a testament to Frymaster's commitment to providing solutions that empower commercial kitchens to operate at peak performance.