Frymaster BIH1721, FPH1721 operation manual Periodic/Annual Maintenance, Built-in Filtration

Page 18

EH1721 SERIES ELECTRIC FRYERS

CHAPTER 3: PREVENTATIVE MAINTENANCE

3.2 Periodic/Annual Maintenance

Frymaster recommends that the fryer be inspected annually by a Factory Authorized Service Technician for the following checks and adjustments:

Inspect the cabinet inside and out, front and rear for excessive oil build-up and/or oil migration.

Verify that the heating element wires are in good condition and that leads have no visible fraying or insulation damage and that they are free of oil migration build-up.

Verify that heating elements are in good condition with no carbon/caramelized oil build-up. Inspect the elements for signs of extensive dry-firing.

Verify that the tilt mechanism is working properly when lifting and lowering elements and that the element wires are not binding and/or chafing.

Verify the heating-element amp-draw is within the allowed range as indicated on the appliance’s rating plate.

Verify that the temperature and high-limit probes are properly connected, tightened and functioning properly, and that the mounting hardware and probe guard is present and properly installed.

Verify that component box and contactor box components (i.e. computer/controller, relays, interface boards, transformers, contactors, etc.) are in good condition and free from oil migration build-up and other debris.

Verify that component box and contactor box wiring connections are tight and that wiring is in good condition.

Verify that all safety features (i.e. contactor shields, drain safety switches, reset switches, etc.) are present and functioning properly.

Verify that the frypot is in good condition and free of leaks and that the frypot insulation is in serviceable condition.

Verify that all wiring harnesses and connections are tight and in good condition.

Built-in Filtration:

Inspect all oil-return and drain lines for leaks and verify that all connections are tight.

Inspect the filter pan for leaks and cleanliness. If there is a large accumulation of crumbs in the crumb basket, advise the owner/operator that the crumb basket should be emptied into a fireproof container and cleaned daily.

Verify that all O-rings and seals (including those on quick-disconnect fittings) are present and in good condition. Replace O-rings and seals if worn or damaged.

3-3

Image 18
Contents Hour Service Hotline EH1721, BIH1721 & FPH1721 SeriesApril Canada Page Table of Contents Safety Information GeneralShipping Damage Claim Procedure Computer InformationService Information After PurchaseService Personnel DefinitionsEH1721 Series Electric Fryers Installation Instructions EH1721 Series Electric Fryers Installation Instructions Electrical Grounding Requirements Do not block the area around the base or under the fryersFryer Installation Australian RequirementsPower Requirements Model Voltage Phase Wire MIN AWG Amps PER LEG Service SizeFrypot Boil Out Equipment Setup and Shutdown Procedures ShutdownCleaning Fryer Clean Inside and Outside of Fryer Cabinet- DailyEH1721 Series Electric Fryers Preventative Maintenance Periodic/Annual Maintenance Built-in FiltrationStainless Steel Care Filtration Preparation Assembling the FilterDaily Filtration Operation Filtering ToolsOperating the Filter Pan PreparationPlace the filter paper over top of pan EH1721 Series Electric Fryers BUILT-IN Filtration Replace the crumb tray in the pan Filter Operation Frypot refilling with filtered oil EH1721 Series Electric Fryers BUILT-IN Filtration Drain-flush handle blue location EH1721 Series Electric Fryers Operator Troubleshooting IntroductionTroubleshooting ActivateControl and Heating Problems Probable CausesOpen Drain Error Messages and Display Problems Probable Causes Basket Lift Problems Probable CausesBuilt-in Filtration Problems Probable Causes Filter pump won’t Recommended Spare Parts Service Hotline

FPH1721, BIH1721 specifications

The Frymaster FPH1721 and BIH1721 are modern deep frying solutions, specifically engineered for performance, efficiency, and ease of use. These fryers are designed to meet the rigorous demands of commercial kitchens while maintaining consistency in cooking quality.

One of the main features of the Frymaster FPH1721 is its innovative design, which allows for outstanding frying efficiency. The fryer utilizes a patented four-pass heat exchange system, ensuring optimal heat transfer and faster recovery times. This means that when food is placed in the fryer, the temperature of the oil remains stable, providing even cooking and reducing the risk of oil degradation.

The BIH1721 model incorporates an impressive oil filtration system that not only extends the life of the cooking oil but also enhances food quality. This built-in filtration system processes oil while the fryer is in use, ensuring that food particles and impurities are continuously removed, leading to cleaner frying results and improved taste.

In addition to these features, another advantage of the FPH1721 and BIH1721 models is their user-friendly digital control system. This intuitive interface allows operators to easily set and monitor cooking times, temperatures, and oil usage, making it simple to achieve consistent results without extensive training. The programmable feature also allows users to save specific cooking profiles, further enhancing efficiency and productivity in the kitchen.

Both fryers are constructed using high-quality materials to endure the demands of high-volume frying operations. The stainless steel exterior not only ensures durability but also simplifies cleaning. The fryers are designed with safety in mind, featuring protected heating elements and front-mounted oil drains that allow for safe and easy maintenance.

Overall, the Frymaster FPH1721 and BIH1721 models represent a blend of advanced technology and practical features. Their efficient operation, innovative filtration system, and user-friendly controls make them essential kitchen equipment for restaurants and businesses looking to deliver high-quality fried foods. These fryers are a testament to Frymaster's commitment to providing solutions that empower commercial kitchens to operate at peak performance.