Frymaster FPH1721, BIH1721 operation manual Stainless Steel Care

Page 19

EH1721 SERIES ELECTRIC FRYERS

CHAPTER 3: PREVENTATIVE MAINTENANCE

3.2 Periodic/Annual Maintenance (cont.)

•Check filtration system integrity as follows:

−With the filter pan empty, place each oil return handle, one at a time, in the ON position. Verify that the pump activates and that bubbles appear in the oil of the associated frypot.

−Close all oil return valves (i.e., place all oil return handles in the OFF position). Verify proper functioning of each oil return valve by activating the filter pump using the lever on one of the oil return handle microswitches. No air bubbles should be visible in any frypot.

−Verify that the filter pan is properly prepared for filtering, then drain a frypot of oil heated to 350°F (177°C) into the filter pan and close the frypot drain valve. Place the oil return handle in the ON position. Allow all oil to return to the frypot (indicated by bubbles in the oil). Return the oil return handle to the OFF position. The frypot should refill in no more than 2 minutes and 30 seconds.

To ensure good fryer health and a safe environment, the fryer should be checked and adjusted periodically by qualified service personnel as part of a regular kitchen maintenance program.

3.3 Stainless Steel Care

All stainless steel fryer outer parts should be wiped regularly with hot, soapy water during the day and with a liquid cleaner designed for this material at the end of each day.

Do not use steel wool, abrasive cloths, cleansers or powders!

Do not use a metal knife, spatula or any other metal tool to scrape stainless steel! Scratches are almost impossible to remove.

If it is necessary to scrape the stainless steel to remove any encrusted materials, soak the area first to loosen the material, then use a wood or nylon scraper only.

3-4

Page 18 Page 20
Image 19
Page 18 Page 20
Contents EH1721, BIH1721 & FPH1721 Series Hour Service HotlineApril Canada Page Table of Contents General Safety InformationComputer Information Shipping Damage Claim ProcedureAfter Purchase Service InformationDefinitions Service PersonnelEH1721 Series Electric Fryers Installation Instructions EH1721 Series Electric Fryers Installation Instructions Do not block the area around the base or under the fryers Electrical Grounding RequirementsAustralian Requirements Fryer InstallationModel Voltage Phase Wire MIN AWG Amps PER LEG Service Size Power RequirementsFrypot Boil Out Shutdown Equipment Setup and Shutdown ProceduresClean Inside and Outside of Fryer Cabinet- Daily Cleaning FryerEH1721 Series Electric Fryers Preventative Maintenance Built-in Filtration Periodic/Annual MaintenanceStainless Steel Care Assembling the Filter Filtration PreparationFiltering Tools Daily Filtration OperationPan Preparation Operating the FilterPlace the filter paper over top of pan EH1721 Series Electric Fryers BUILT-IN Filtration Replace the crumb tray in the pan Filter Operation Frypot refilling with filtered oil EH1721 Series Electric Fryers BUILT-IN Filtration Drain-flush handle blue location Introduction EH1721 Series Electric Fryers Operator TroubleshootingActivate TroubleshootingProbable Causes Control and Heating ProblemsOpen Drain Basket Lift Problems Probable Causes Error Messages and Display Problems Probable CausesBuilt-in Filtration Problems Probable Causes Filter pump won’t Recommended Spare Parts Service Hotline

FPH1721, BIH1721 specifications

The Frymaster FPH1721 and BIH1721 are modern deep frying solutions, specifically engineered for performance, efficiency, and ease of use. These fryers are designed to meet the rigorous demands of commercial kitchens while maintaining consistency in cooking quality.

One of the main features of the Frymaster FPH1721 is its innovative design, which allows for outstanding frying efficiency. The fryer utilizes a patented four-pass heat exchange system, ensuring optimal heat transfer and faster recovery times. This means that when food is placed in the fryer, the temperature of the oil remains stable, providing even cooking and reducing the risk of oil degradation.

The BIH1721 model incorporates an impressive oil filtration system that not only extends the life of the cooking oil but also enhances food quality. This built-in filtration system processes oil while the fryer is in use, ensuring that food particles and impurities are continuously removed, leading to cleaner frying results and improved taste.

In addition to these features, another advantage of the FPH1721 and BIH1721 models is their user-friendly digital control system. This intuitive interface allows operators to easily set and monitor cooking times, temperatures, and oil usage, making it simple to achieve consistent results without extensive training. The programmable feature also allows users to save specific cooking profiles, further enhancing efficiency and productivity in the kitchen.

Both fryers are constructed using high-quality materials to endure the demands of high-volume frying operations. The stainless steel exterior not only ensures durability but also simplifies cleaning. The fryers are designed with safety in mind, featuring protected heating elements and front-mounted oil drains that allow for safe and easy maintenance.

Overall, the Frymaster FPH1721 and BIH1721 models represent a blend of advanced technology and practical features. Their efficient operation, innovative filtration system, and user-friendly controls make them essential kitchen equipment for restaurants and businesses looking to deliver high-quality fried foods. These fryers are a testament to Frymaster's commitment to providing solutions that empower commercial kitchens to operate at peak performance.
Top Page Image Contents