Frymaster 8196339 operation manual Operation of the Filter

4.Replace the Magnasol filter assembly in the filter pan, ensuring that the fitting on the bottom of the assembly is securely seated in the port in the bottom of the pan. Sprinkle one packet of the Magnasol XL filter powder evenly over the screen.

5.Replace the crumb tray, then push the filter pan back into the fryer, positioning it all the way to the back of the cabinet.

5.3Operation of the Filter

After a preset amount of cook cycles the computer will automatically display FLTR NOW

alternating with YES NO.

1. Press the 9 (1) button to continue (see Figure 8).

The computer displays CNFM FLTR alternating with YES NO.

2. Press the 9 (1) button to continue (see Figure 9).

DANGER

Figure 8

Figure 9

Draining and filtering of cooking oil must be accomplished with care to avoid the possibility of a serious burn caused by careless handling. The oil to be filtered is at or near 350°F (177°C). Ensure drain handles are in their proper position before operating any switches or valves. Wear all appropriate safety equipment when draining and filtering cooking oil.

DANGER

NEVER attempt to drain cooking oil from the fryer with the burners lit! Doing so will cause irreparable damage to the frypot and may cause a flash fire. Doing so will also void the Frymaster warranty.

3.Ensure that the filter is prepared. See Sec. 5.2.

4.Make sure the oil is at operating temperature.

5.Drain the frypot into the filter pan by rotating the drain valve handle 90º (see Figure 10). If necessary, use the Fryer's Friend clean-out rod to clear the drain from inside the frypot.

Open drain valve by rotating 90º.

Figure 10

DANGER

Do not drain more than one frypot at a time into the built-in filtration unit to avoid overflow and spillage of hot oil that may cause severe burns, slipping and falling.

5-5