INSTALL FILTERS
!CAUTION: Remove protective plastic film covering filters before installing them.
It is recommended to install side filters first and finish with center one(s).
1)Insert upper end of filter into the hood (pull tab side).
2)Raise lower end toward the inside of hood.
3)Position rear part of filter into channel and pull.
4)Using the pull tab, pull on the upper end of filter and slide it under the front inner retaining piece.
1
2
HD0075
4
3
HD0024
Replacement filters are available.
Refer to page 12 for ordering information.
11
Warranty
Safety
Operation
Cleaning
Installation
Service Parts