Multiplex Technology 301 manual Basic principles, Menu button Menu function

Page 8

4. The basic principles

The five menu buttons of the PROFI CAR are the key to all the adjustments you can make. The symbols tell you the menu points to which each button provides access.

Menu button

Menu function

 

 

A

TRIGGER

Everything to do with throttle and brake

 

NORM, CENTRE, TRAVEL and EXPO for the THROTTLE/BRAKE servo

 

 

L

STEERING

Adjust steering to suit the track / vehicle / driver

 

NORM, CENTRE, TRAVEL and EXPO for the STEERING servo

 

 

U

TIMER

Switch stopwatch ON or OFF, set signal time

 

Check and erase operating hours timer

 

 

T

TOOL

Basic transmitter settings

 

Set servo 3 mode

 

 

F

MEMORY

Change, assign name, erase

 

 

Once you have found your way to the appropriate menu point, you use the digi- adjustor and the handle button to complete the process.

DIGI-ADJUSTOR

Set values (travels, times, ...)

HANDLE BUTTON Confirm erasure and memory change (hold pressed in for longer than 3 sec.)

Return to the operating screen; press any menu button other than the one you last used.

When you see the operating screen (i.e. when you have completed your adjustments), the functions of the handle button and the digi-adjustor are as follows:

HANDLE BUTTON

Operate stopwatch (if active)

DIGI-ADJUSTOR

Adjust steering travel

25

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Service Profi CARTrimm-Wippen La gâchette Trigger duster AbzugLos trimados Les trims MA max Menu Menú Menus ModuloContents Safety Radio-controlled models are not playthingsFeatures and specification Norm Instrument panel screenBuggy Basic principles Menu button Menu functionSwitching on for the first time Adjusting the steering servo Steering LThis is the procedure PreparationTIP Setting minimum steering travelExpo Setting the steering trim increment menu „ T THROTTLE/BRAKE servo aBRK Throttle and brake with ExpoIdle trim Trimming the brake lock pointStopwatch and operating hours timer º Timer OFFActivating the stopwatch timer Stopwatch signal race durationModel memories OptimeGO to StampAuxiliary function, servo EraseALL To return to the operating screenAM-FM switching menu „T , AM-FM Setting the auxiliary channel mode menu point S-NORMSettings which affect the whole transmitter Toolbox TAlarm Setting the battery alarm threshold menu „T , AlarmSelecting the screen language menu „T , Text Entering the owner’s name menu „T, NameTips on installing the receiving system in the model TIP ! if you model is powered by an electric motorFollowing points are particularly important Post Office regulations for the U.KRange checking Cleaning the transmitterCare of the transmitter Maintenance Profi CAR 301 menu structure

301 specifications

Multiplex Technology 301 is a cutting-edge solution designed to enhance data transmission and processing across multiple channels simultaneously. This innovative approach has gained traction in various industries, including telecommunications, broadcasting, and data centers, due to its ability to efficiently manage large data flows.

One of the main features of Multiplex Technology 301 is its ability to combine multiple signals into a single medium. This process, known as multiplexing, reduces the need for separate transmission paths for each signal, leading to significant cost savings and a more streamlined operation. By maximizing the utilization of existing bandwidth, Multiplex Technology 301 ensures that organizations can handle increasing data demands without the need for extensive infrastructure investments.

In terms of technology, Multiplex Technology 301 employs several advanced methodologies, including Time Division Multiplexing (TDM), Frequency Division Multiplexing (FDM), and Code Division Multiple Access (CDMA). TDM allows multiple signals to share the same channel by dividing the time into slots, where each signal takes turns transmitting. FDM, on the other hand, assigns different frequencies to different signals, enabling simultaneous transmission without interference. CDMA utilizes unique codes to distinguish between signals, allowing for increased capacity and efficiency.

The characteristics of Multiplex Technology 301 also set it apart from traditional data transmission methods. It offers improved signal quality and reduced latency, which are critical for real-time applications such as video conferencing and online gaming. Moreover, the technology is designed to be scalable, enabling organizations to adapt to future data growth easily. As data traffic continues to surge, Multiplex Technology 301 facilitates seamless upgrades without major disruptions.

Additionally, the technology promotes high reliability through robust error detection and correction mechanisms, ensuring data integrity over long distances. Its compatibility with a wide range of communication protocols further enhances its versatility, making it suitable for various applications, from corporate networks to large-scale broadcasting systems.

In conclusion, Multiplex Technology 301 represents a significant advancement in the field of data transmission. With its ability to optimize bandwidth usage, minimize costs, and enhance data integrity, it is poised to become a vital tool for organizations seeking to navigate the complexities of modern data demands. As industries continue to evolve, embracing such innovative technologies will be crucial for maintaining a competitive edge in an increasingly data-driven world.
Top Page Image Contents