Multiplex Technology 301 manual Stopwatch and operating hours timer º, Timer OFF

SIGNAL 19:59:9

min : sec : 1/10

8. Stopwatch and operating hours timer º

The PROFI CAR 301 provides the following timing facilities:

vStopwatch (TIMER)

Start and stop the stopwatch using the handle button G, provided that the function has already been switched on in the TIMER menu.

vStopwatch SIGNAL

Audible signal which can be used to signal the end of a practice run, for example (max. 20 min.).

vOperating hours timer (OPTIME)

This timer records the period of use of the transmitter battery, and it always

runs when the transmitter is switched on. You can erase the operating time in the „º“OPTIME menu.

8.1.Activating the stopwatch (timer)

This is the procedure:

§Search for the menu point TIMER with the º button

§Select ON or OFF with the digi-adjustor

Press any menu button (except º) to return to the operating screen.

The stopwatch is operated by the handle button G(START/STOP).

Resetting the stopwatch to 0:

TIMER OFF

The stopwatch is reset to 00.0 by holding the handle button Gpressed in for longer than 3 sec. You can only do this when the operating screen is displayed.

8.2.Stopwatch signal (race duration)

The stopwatch’s signal function is useful for practice purposes: you set the signal time to the planned race duration (max. 20 min.). Once you start the stopwatch (by pressing the handle button) you will hear the following signals:

Xshort tone	every full minute,
	every 10 sec. during the last minute
X X long tone	every second during the last 10 sec.
	when the set time is elapsed

This is the procedure for setting the signal time:

§ Search for the menu point SIGNAL with the ºbutton § Rotate the digi-adjustor to adjust the flashing number

§Press the handle button Gto move the cursor to the

next character

Press any menu button (except º) to return to the operating screen.

33