Multiplex Technology 301 manual Care of the transmitter, Range checking, Cleaning the transmitter

Page 22

13.2.Range checking

The range check makes a really important contribution to the operational security and safety of your model. We have developed a test procedure based on our own experience and measurements, which will always keep you on the safe side.

§Collapse the transmitter aerial completely, and hold the transmitter as if operating a model.

§The check must be carried out with the motor running.

Ask a friend to hold the model, or pack it up so that the steering and driven wheels are free to move .

§There must be no large metal objects (cars, wire fences, etc.) in the vicinity.

§There is no point in carrying out the check if there are other transmitters switched on - even on other channels.

§Switch on the transmitter and receiver, and check that the model responds correctly and immediately to all control commands, without carrying out any uncontrolled movements, when the transmitter is about 30 m from the model.

'TIP !

Poor effective range may be due to any of the following problems:

vInadequate suppression of electric power systems and ignition systems.

vAerial wire damaged, too short (less than 40 cm) or poorly installed.

vEnvironmental effects (damp ground, shielding by metal fences, etc.).

If radio range with the aerial collapsed is not sufficient, and you are unable to identify any of the potential problems stated above, repeat the check with the aerial extended. The safe operating distance between transmitter and model should now be around 1.5 times the actual required radius of action.

!If you have any doubts, don’t run your model! Check everything again in peace and quiet, so that you can locate and eliminate the problem reliably!

13.3.Care of the transmitter

Protect your transmitter from mechanical damage, temperatures above 60°C (direct sunshine in a car), damp, solvents, fuel, exhaust residues and dust. Bear in mind that condensation may occur inside the transmitter if it is subjected to a swift change of temperature (e.g. when taken from a warm workshop to a cold car). Condensation may prevent the transmitter working properly or at all. If this should happen, allow the transmitter plenty of time to adjust to the new temperature, and be sure to carry out a particularly thorough range test. Check that the transmitter is completely dry, including the interior (battery compartment), before you switch it on.

Cleaning the transmitter

The best method of removing dust is to use a soft paintbrush. The case can be cleaned with a slightly damp cloth and a mild household cleaning agent.

!Take great care that no liquids get inside the transmitter.

39

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Service Profi CARLos trimados Les trims La gâchette Trigger duster AbzugTrimm-Wippen MA max Menu Menú Menus ModuloContents Safety Radio-controlled models are not playthingsFeatures and specification Buggy Instrument panel screenNorm Basic principles Menu button Menu functionSwitching on for the first time Adjusting the steering servo Steering LThis is the procedure PreparationExpo Setting minimum steering travelTIP Setting the steering trim increment menu „ T THROTTLE/BRAKE servo aBRK Throttle and brake with ExpoIdle trim Trimming the brake lock pointActivating the stopwatch timer Stopwatch and operating hours timer ºTimer OFF Stopwatch signal race durationGO to Model memoriesOptime StampALL Auxiliary function, servoErase To return to the operating screenSettings which affect the whole transmitter AM-FM switching menu „T , AM-FMSetting the auxiliary channel mode menu point S-NORM Toolbox TSelecting the screen language menu „T , Text AlarmSetting the battery alarm threshold menu „T , Alarm Entering the owner’s name menu „T, NameFollowing points are particularly important Tips on installing the receiving system in the modelTIP ! if you model is powered by an electric motor Post Office regulations for the U.KCare of the transmitter Cleaning the transmitterRange checking Maintenance Profi CAR 301 menu structure

301 specifications

Multiplex Technology 301 is a cutting-edge solution designed to enhance data transmission and processing across multiple channels simultaneously. This innovative approach has gained traction in various industries, including telecommunications, broadcasting, and data centers, due to its ability to efficiently manage large data flows.

One of the main features of Multiplex Technology 301 is its ability to combine multiple signals into a single medium. This process, known as multiplexing, reduces the need for separate transmission paths for each signal, leading to significant cost savings and a more streamlined operation. By maximizing the utilization of existing bandwidth, Multiplex Technology 301 ensures that organizations can handle increasing data demands without the need for extensive infrastructure investments.

In terms of technology, Multiplex Technology 301 employs several advanced methodologies, including Time Division Multiplexing (TDM), Frequency Division Multiplexing (FDM), and Code Division Multiple Access (CDMA). TDM allows multiple signals to share the same channel by dividing the time into slots, where each signal takes turns transmitting. FDM, on the other hand, assigns different frequencies to different signals, enabling simultaneous transmission without interference. CDMA utilizes unique codes to distinguish between signals, allowing for increased capacity and efficiency.

The characteristics of Multiplex Technology 301 also set it apart from traditional data transmission methods. It offers improved signal quality and reduced latency, which are critical for real-time applications such as video conferencing and online gaming. Moreover, the technology is designed to be scalable, enabling organizations to adapt to future data growth easily. As data traffic continues to surge, Multiplex Technology 301 facilitates seamless upgrades without major disruptions.

Additionally, the technology promotes high reliability through robust error detection and correction mechanisms, ensuring data integrity over long distances. Its compatibility with a wide range of communication protocols further enhances its versatility, making it suitable for various applications, from corporate networks to large-scale broadcasting systems.

In conclusion, Multiplex Technology 301 represents a significant advancement in the field of data transmission. With its ability to optimize bandwidth usage, minimize costs, and enhance data integrity, it is poised to become a vital tool for organizations seeking to navigate the complexities of modern data demands. As industries continue to evolve, embracing such innovative technologies will be crucial for maintaining a competitive edge in an increasingly data-driven world.
Top Page Image Contents