Jenn-Air JGC9536, JGC9430 installation manual Electric Wall Oven Installed below this Cooktop

Page 5

2.IF THIS UNIT WILL HAVE A JENN-AIR MODEL JJW8530, JJW9530, W30400P, or JJW8130

ELECTRIC WALL OVEN INSTALLED BELOW THIS COOKTOP.

ILLUSTRATIVE GAS SUPPLY PIPING

(WALL OVEN INSTALLED BELOW 30￿ COOKTOP)

NOTE 1: This appliance and its gas and electrical supply sources must be installed before the wall oven is installed. See illustration (Electrical Wiring Information - page 7; figure 6) for recommended electrical supply source locations.

NOTE 2: It may be necessary to extend gas supply piping for this appliance into adjacent under-counter cabinetry when a wall oven is installed below this appliance.

Join a 3/8￿ NPT pipe elbow (locally available) to the male threads at the manifold entrance. When joined, ensure open threads of the elbow face toward the left side of the appliance. Install the appliance in its counter cutout.

Join a 3/8￿ NPT pipe nipple to the elbow using a pipe section of sufficient length to extend, horizontally, beyond the left side of the wall oven. (To accomplish this it may be necessary to extend the pipe section into adjacent cabinetry.) Join additional 3/8￿ NPT elbow(s) and pipe nipples, as necessary, to accomplish the following:

Join the outlet of the appliance pressure regulator supplied with this appliance to the male threads of the newly installed gas supply piping. Install the appliance regulator in a location which will be accessible beside or below the wall oven. Insure the appliance regulator is installed with its directional arrow pointing in the direction of gas flow. Tighten the appliance regulator to 20 to 30 ft-lbs of torque.

ALL UNIT SIDE PIPE JOINTS 3/8￿ N.P.T.

(3/8￿ N.P.T.)

ALL SUPPLY SIDE

PIPE JOINTS

1/2￿ N.P.T.

FIGURE 4

I M P O R T A N T

Never tighten to more than 35 ft-lbs of torque. Always use an approved pipe joint compound resistant to the action of LP gas.

Locate and join a manual shut-off valve in an accessible location in the gas line ahead of the appliance regulator and external to the appliance for the purpose of turning on or shutting off gas to the appliance.

Make additional pipe connections as necessary ahead of the shut-off valve to the gas supply source. Assure all pipe joint connections are gas tight.

I M P O R T A N T

Apply a non-corrosive leak detection fluid to all joints and fittings in the gas connection between the supply line shut-off valve and the cooktop. Include gas fittings and joints in the cooktop if connections were disturbed during installation. Check for leaks! Bubbles appearing around fittings and connections will indicate a leak. If a leak appears, turn off supply line gas shut-off valve, tighten connections, turn on the supply line gas shut off valve, and retest for leaks. Never test for gas leaks with an open flame.

Note, regarding Figure 4, above:

SFor convenience in service a union (not shown: locally available) should be included in the piping illustrated in figure 4, in a location most practical for the installation. Generally, a practical location is in the cabinet below this appliance, near the manifold entrance, rather than in an adjoining cabinet.

SIf the alternative piping method shown in figure 5 is selected for the installation, no union is required. (The flexible appliance connector illustrated provides the union joints necessary for servicing.) When a dividing wall is present and a flexible connector is used it is recommended for convenience, in both installation and service, the flexible connector, itself, pass through the dividing wall. Any flexible connector used with this appliance must satisfy all requirements stated in the text accompanying figure 5.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Dimensions Cutout Dimensions Are CriticalRequired Adjustments At Time Of Installation Installing Cabinetry Over Your Jenn-Air CooktopLocation Of Your Jenn-Air Appliance Important Preparation SuggestionsRecreational Park Trailers Installation Of ApplianceMobile Homes Illustrative GAS Supply Piping Connecting Appliance To Gas SupplyIf no Other Appliance is to be Installed below this Cooktop Wall Oven Installed below 30 Cooktop Electric Wall Oven Installed below this CooktopIllustrative Alternative Piping Pressure TestingElectrical Grounding Instructions Electrical Wiring InformationReplace ALL Orifice Spuds Converting Appliance For Use With LP GasView Through Knob Hole Conversion of Appliance Pressure RegulatorFlame Appearance AT HI and LO To Convert Appliance For Use With Natural GasBurner Ignition Auto-Reignition Reset the Valves for Natural GASLAS Dimensiones DE Corte DEL Hueco SON DE Suma Importancia DimensionesUbicación del electrodoméstico Jenn-Air Instalación del electrodoméstico Casas móvilesVehículos recreativos Caja DEL Quemador Conexión del electrodoméstico al suministro de gasIlustración DE LA Tubería DEL Suministro DE GAS Nota, en referencia a la Figura 4 anterior Ilustración DE LA Tubería Alternativa Pruebas de presiónInstrucciones eléctricas de conexión Tierra Información de cableado eléctricoInstalación DE LOS Puntales DE Orificio Obturadores Conversión del electrodoméstico para usarse con gas LPRemoción DEL Puntal DE Orificio Coloque DE Nuevo Todos LOS Puntales DE OrificioChaflán Superficie Orientado DE Vidrio Conversión DEL Regulador DE Presión DEL ElectrodomésticoInstalación de los puntales de orificio de gas Natural Apariencia DE LA Llama EN Alto BajoReajuste LAS Válvulas Para Usar GAS Natural Encendido del quemador y reencendido automáticoRespecter Impérativement LES Dimensions DE LA Découpe Manuel DE Mise EN ServiceRéglages requis lors de la mise en service Emplacement de votre appareil Jenn-AirSuggestions de préparation importantes Préparation du comptoirPose de l’appareil Maisons mobilesRoulottes de parc Boîte DES Brûleurs Raccordement de l’appareil au gazIllustration D’UNE Conduite DE GAZ Remarque concernant la ci-dessus Illustration D’UNE Méthode Alternative Vérification de la pressionCâblage électrique AvertissementPose DE Raccords ET DE Réducteurs DE Débit D’ORIFICE GPL Conversion de l’appareil au gaz GPLDépose DE L’ÉCROU À Orifice Remplacer Tous LES Raccords À OrificeVUE Dans LE Trou DU Bouton Conversion DU Détendeur DE L’APPAREILApparence DE LA Flamme À Plein FEU ET À FEU Doux Pour convertir l’appareil au gaz naturelAllumage standard et allumage automatique des brûleurs Reconversion DES Commandes AU GAZ Naturel

JGC9536, JGC9430 specifications

The Jenn-Air JGC9536 and JGC9430 are two prominent models in the realm of premium gas cooktops, designed to elevate culinary experiences in the modern kitchen. Both models offer a range of advanced features and technologies that cater to the needs of chefs at all skill levels.

Starting with the JGC9536, this cooktop boasts a powerful 19,000 BTU burner, ideal for rapid boiling and high-heat searing. This feature is complemented by a versatile selection of burner sizes, including a 15,000 BTU dual-flame burner, which allows for precise temperature control. This burner is particularly advantageous for simmering sauces or slow-cooking delicate dishes. Additionally, the JGC9536 incorporates powerful 6,000 BTU burners that are excellent for everyday cooking tasks, providing a good balance between heat and efficiency.

The JGC9430, while slightly smaller, does not compromise on performance. It features a robust 16,000 BTU burner that provides ample power for a variety of cooking methods. Both models are equipped with continuous cast iron grates that allow for easy movement of pots and pans across the cooktop. This design not only enhances stability but also offers a professional look to the kitchen.

A notable technology integrated into both the JGC9536 and JGC9430 is the Precision Temperature Control. This feature provides consistent heat across the burners, ensuring food is cooked evenly. The high-performance ignition system is another highlight, allowing for quick and reliable burner lighting, which is essential for busy kitchen environments.

In terms of aesthetics, both models feature sleek stainless steel finishes and a sophisticated design that complements any kitchen décor. The illuminated knobs on the front provide not only a stylish touch but also practical visibility, making it easy to operate even in low-light conditions.

Safety features are also a focus for both cooktops. The flame-sensing technology automatically re-ignites the burner if the flame goes out, providing peace of mind while cooking. Additionally, the sealed burners minimize the risk of spills and allow for easy cleaning.

In summary, the Jenn-Air JGC9536 and JGC9430 gas cooktops are top-tier choices for those seeking to enhance their cooking experience. With powerful burners, advanced temperature control technologies, and a commitment to safety and aesthetics, these cooktops stand out as excellent investments for any kitchen. Whether for everyday cooking or culinary adventures, these models deliver exceptional performance and versatility.
Top Page Image Contents