Jenn-Air JGC9430, JGC9536 Connecting Appliance To Gas Supply, Illustrative GAS Supply Piping

Page 4

Connecting Appliance To Gas Supply

A QUALIFIED SERVICEMAN OR GAS APPLIANCE INSTALLER MUST MAKE THE GAS SUPPLY CONNECTION. Leak testing of the appliance shall be conducted by the installer according to the instructions given.

Gas supply piping MUST conform to all local, municipal and state building codes and local utility regulations.

1.IF NO OTHER APPLIANCE IS TO BE INSTALLED BELOW THIS COOKTOP

Join the appliance pressure regulator supplied with this appliance to the entrance threads of the Gas Manifold. The appliance regulator is marked with a directional arrow indicating correct direction of gas flow. Ensure the appliance regulator is installed with the arrow pointing toward the gas manifold entrance. Tighten the appliance regulator to 20 to 30 ft-lbs of torque.

I M P O R T A N T

Never tighten to more than 35 ft-lbs of torque. Always use an approved pipe joint compound resistant to the action of LP gas.

Install the appliance in its counter cutout.

Make the gas connection to the inlet of the appliance pressure regulator with 1/2￿ NPT male pipe threads.

Install a manual shut-off valve in an accessible location in the gas line ahead of the appliance pressure regulator and external to this appliance for the purpose of turning on or shutting off gas to the appliance.

Make additional pipe connections as necessary ahead of the shut-off valve to the gas supply source. Assure all pipe joint connections are gas tight.

I M P O R T A N T

Apply a non-corrosive leak detection fluid to all joints and fittings in the gas connection between the supply line shut-off valve and the cooktop. Include gas fittings and joints in the cooktop if connections were disturbed during installation. Check for leaks! Bubbles appearing around fittings and connections will indicate a leak. If a leak appears, turn off supply line gas shut-off valve, tighten connections, turn on the supply line gas shut off valve, and retest for leaks. Never test for gas leaks with an open flame.

ILLUSTRATIVE GAS SUPPLY PIPING

(3/8￿ N.P.T.)

ALL SUPPLY SIDE

PIPE JOINTS

1/2￿ N.P.T.

FIGURE 3

4

Image 4
Contents Cutout Dimensions Are Critical DimensionsInstalling Cabinetry Over Your Jenn-Air Cooktop Required Adjustments At Time Of InstallationLocation Of Your Jenn-Air Appliance Important Preparation SuggestionsMobile Homes Installation Of ApplianceRecreational Park Trailers If no Other Appliance is to be Installed below this Cooktop Connecting Appliance To Gas SupplyIllustrative GAS Supply Piping Electric Wall Oven Installed below this Cooktop Wall Oven Installed below 30 CooktopPressure Testing Illustrative Alternative PipingElectrical Wiring Information Electrical Grounding InstructionsConverting Appliance For Use With LP Gas Replace ALL Orifice SpudsConversion of Appliance Pressure Regulator View Through Knob HoleTo Convert Appliance For Use With Natural Gas Flame Appearance AT HI and LOReset the Valves for Natural GAS Burner Ignition Auto-ReignitionDimensiones LAS Dimensiones DE Corte DEL Hueco SON DE Suma ImportanciaUbicación del electrodoméstico Jenn-Air Vehículos recreativos Casas móvilesInstalación del electrodoméstico Ilustración DE LA Tubería DEL Suministro DE GAS Conexión del electrodoméstico al suministro de gasCaja DEL Quemador Nota, en referencia a la Figura 4 anterior Pruebas de presión Ilustración DE LA Tubería AlternativaInformación de cableado eléctrico Instrucciones eléctricas de conexión TierraConversión del electrodoméstico para usarse con gas LP Instalación DE LOS Puntales DE Orificio ObturadoresRemoción DEL Puntal DE Orificio Coloque DE Nuevo Todos LOS Puntales DE OrificioConversión DEL Regulador DE Presión DEL Electrodoméstico Chaflán Superficie Orientado DE VidrioApariencia DE LA Llama EN Alto Bajo Instalación de los puntales de orificio de gas NaturalEncendido del quemador y reencendido automático Reajuste LAS Válvulas Para Usar GAS NaturalManuel DE Mise EN Service Respecter Impérativement LES Dimensions DE LA DécoupeEmplacement de votre appareil Jenn-Air Réglages requis lors de la mise en serviceSuggestions de préparation importantes Préparation du comptoirRoulottes de parc Maisons mobilesPose de l’appareil Illustration D’UNE Conduite DE GAZ Raccordement de l’appareil au gazBoîte DES Brûleurs Remarque concernant la ci-dessus Vérification de la pression Illustration D’UNE Méthode AlternativeAvertissement Câblage électriqueConversion de l’appareil au gaz GPL Pose DE Raccords ET DE Réducteurs DE Débit D’ORIFICE GPLDépose DE L’ÉCROU À Orifice Remplacer Tous LES Raccords À OrificeConversion DU Détendeur DE L’APPAREIL VUE Dans LE Trou DU BoutonPour convertir l’appareil au gaz naturel Apparence DE LA Flamme À Plein FEU ET À FEU DouxReconversion DES Commandes AU GAZ Naturel Allumage standard et allumage automatique des brûleurs

JGC9536, JGC9430 specifications

The Jenn-Air JGC9536 and JGC9430 are two prominent models in the realm of premium gas cooktops, designed to elevate culinary experiences in the modern kitchen. Both models offer a range of advanced features and technologies that cater to the needs of chefs at all skill levels.

Starting with the JGC9536, this cooktop boasts a powerful 19,000 BTU burner, ideal for rapid boiling and high-heat searing. This feature is complemented by a versatile selection of burner sizes, including a 15,000 BTU dual-flame burner, which allows for precise temperature control. This burner is particularly advantageous for simmering sauces or slow-cooking delicate dishes. Additionally, the JGC9536 incorporates powerful 6,000 BTU burners that are excellent for everyday cooking tasks, providing a good balance between heat and efficiency.

The JGC9430, while slightly smaller, does not compromise on performance. It features a robust 16,000 BTU burner that provides ample power for a variety of cooking methods. Both models are equipped with continuous cast iron grates that allow for easy movement of pots and pans across the cooktop. This design not only enhances stability but also offers a professional look to the kitchen.

A notable technology integrated into both the JGC9536 and JGC9430 is the Precision Temperature Control. This feature provides consistent heat across the burners, ensuring food is cooked evenly. The high-performance ignition system is another highlight, allowing for quick and reliable burner lighting, which is essential for busy kitchen environments.

In terms of aesthetics, both models feature sleek stainless steel finishes and a sophisticated design that complements any kitchen décor. The illuminated knobs on the front provide not only a stylish touch but also practical visibility, making it easy to operate even in low-light conditions.

Safety features are also a focus for both cooktops. The flame-sensing technology automatically re-ignites the burner if the flame goes out, providing peace of mind while cooking. Additionally, the sealed burners minimize the risk of spills and allow for easy cleaning.

In summary, the Jenn-Air JGC9536 and JGC9430 gas cooktops are top-tier choices for those seeking to enhance their cooking experience. With powerful burners, advanced temperature control technologies, and a commitment to safety and aesthetics, these cooktops stand out as excellent investments for any kitchen. Whether for everyday cooking or culinary adventures, these models deliver exceptional performance and versatility.