Configuring and Expanding Your Computer
Installing RAM Modules
Installing RAM Modules
| The notebook provides an optional memory expansion slot for installing up to two RAM |
| expansion modules. Use HP |
| Static electricity can permanently damage computer chips. Handle the RAM module |
CAUTION | |
| only by its three |
| to electrostatic discharge. Always discharge the static electricity from your body by |
| touching the metal shielding around the connectors on the rear of the computer |
| before touching or installing the memory module. |
You’ll need a small Phillips screwdriver to complete this procedure.
1.Click Start, Turn Off Computer, Turn Off.
2.Important: unplug the AC adapter, if present, and remove the battery.
3.Remove the RAM expansion cover located on the bottom of the computer.
4.Insert the RAM expansion module into the connector at about a 30° angle until it’s fully inserted. Then press down at both sides of the module until it latches.
5.Replace the RAM expansion module door.
6.Insert the battery.
