Jenn-Air JGC9536, JGC9430 Mobile Homes, Recreational Park Trailers, Installation Of Appliance

Page 3

Check the cooktop serial plate to see if the cooktop is approved for installation in mobile homes and/or recreational park trailers. Serial plate is located on the bottom of the unit.

If approved, the following items are applicable:

Mobile Homes

The installation of a range designed for mobile home installation must conform with the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 [formerly the Federal Standard for Mobile Home Construction and Safety, Title 24 HUD, (Part 280)] or, when such standard is not applicable, the Standard for Manufactured Home Installations, ANSI A225.1/NFPA 501A, or with local codes.

In Canada the range must be installed in accordance with the current CSA Standard C22.1 - Canadian Electrical Code Part 1 and Section Z240.4.1 - Installation Requirements for Gas Burning Appliances in Mobile Homes (CSA Standard CAN/CSA - Z240MH).

Recreational Park Trailers

The installation of a range designed for recreational park trailers must conform with state or other codes or, in the absence of such codes, with the Standard for Recreational Park Trailers, ANSI A119.5-latest edition.

In Canada the range must be installed in accordance with CAN/CSA - Z240.6.2 - Electrical Requirements for R.V.’s (CSA Standard CAN/CSA - Z240 RV Series) and Section Z240.4.2 - Installation Requirements for Propane Appliances and Equipment in R.V.’s (CSA Standard CAN/CSA - Z240 RV Series).

Installation Of Appliance

The installation of this appliance must conform with local codes or, in the absence of local codes, with the National Fuel Gas Code, ANSI Z223.1-Latest Edition, or, in Canada, CAN/CGA-B149 Installation Code, Latest Edition.

This appliance, when installed, must be electrically grounded in accordance with local codes or, in the absence of local codes, with the National Electrical Code ANSI/NFPA No. 70-Latest Edition, or, in Canada, current CSA Standard C22.1 Canadian Electrical Code, Part 1.

In The Commonwealth Of Massachusetts:

This product must be installed by a licensed plumber or gas fitter when installed within the Commonwealth of Massachusetts.

A “T” handle type manual gas valve must be installed in the gas supply line to this appliance.

A flexible gas connector, when used, must not exceed a length of three (3) feet / 36 inches.

All supply piping, except as noted, should use common National Pipe Thread (N.P.T.). For all pipe connections use an approved pipe joint compound resistant to the action of LP gas.

CAUTION: Warranty is void on Jenn-Air equipment installed other than as recommended by manufacturer.

This appliance is designed for use with the appliance gas pressure regulator supplied with this appliance. It must be installed in the gas line ahead of the gas manifold entrance. It is preset for use with natural gas and must be converted, as described on pages 8, 9, and 10, for use with LP gas. (See figures 11 and 12.)

This appliance is designed to operate at a pressure of 5 inches of water column on natural gas or, if converted for use with LP gas (propane or butane), 10 inches water column. Make sure this appliance is supplied with and adjusted for the type of gas for which it is designed.

This appliance was adjusted at the factory for use with natural gas. If, at any time, this appliance is to be used with a different type of gas, all of the conversion adjustments described on pages 8, 9, and 10 must be made by a qualified service technician before attempting to operate the cooktop on that gas. Natural gas should be supplied to the appliance pressure regulator at a line pressure between 6 and 14 inches of water column or, if converted for LP gas, between 11 and 14 inches.

If the line pressure supplying the appliance pressure regulator exceeds 14￿ W.C. (any gas), an external regulator must be installed in the gas line ahead of the appliance regulator to reduce the pressure to no more than 14￿ W.C. Failure to do this can result in malfunction and damage to the appliance.

Insure this appliance is adjusted for the type of gas supplied to it and that the gas supply pressure to the appliance regulator is within the proper pressure range.

SIf no other appliance is to be installed in the cabinetry below this unit, proceed as instructed under paragraph 1, page 4.

SIf this unit is to be installed over a Jenn-Air Model JJW8530, JJW9530, W30400P, or JJW8130 Electric Wall Oven proceed as instructed under paragraph 2, page 5.

SDo not remove protective cap from pipe stub at manifold entrance until ready to join gas supply piping to appliance.

NOTE: In Canada, gas utilization codes prohibit use of street elbows. Use standard pipe elbows and make modifications to these instructions as necessary.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Dimensions Cutout Dimensions Are CriticalImportant Preparation Suggestions Installing Cabinetry Over Your Jenn-Air CooktopRequired Adjustments At Time Of Installation Location Of Your Jenn-Air ApplianceInstallation Of Appliance Mobile HomesRecreational Park Trailers Connecting Appliance To Gas Supply If no Other Appliance is to be Installed below this CooktopIllustrative GAS Supply Piping Wall Oven Installed below 30 Cooktop Electric Wall Oven Installed below this CooktopIllustrative Alternative Piping Pressure TestingElectrical Grounding Instructions Electrical Wiring InformationReplace ALL Orifice Spuds Converting Appliance For Use With LP GasView Through Knob Hole Conversion of Appliance Pressure RegulatorFlame Appearance AT HI and LO To Convert Appliance For Use With Natural GasBurner Ignition Auto-Reignition Reset the Valves for Natural GASLAS Dimensiones DE Corte DEL Hueco SON DE Suma Importancia DimensionesUbicación del electrodoméstico Jenn-Air Casas móviles Vehículos recreativosInstalación del electrodoméstico Conexión del electrodoméstico al suministro de gas Ilustración DE LA Tubería DEL Suministro DE GASCaja DEL Quemador Nota, en referencia a la Figura 4 anterior Ilustración DE LA Tubería Alternativa Pruebas de presiónInstrucciones eléctricas de conexión Tierra Información de cableado eléctricoColoque DE Nuevo Todos LOS Puntales DE Orificio Conversión del electrodoméstico para usarse con gas LPInstalación DE LOS Puntales DE Orificio Obturadores Remoción DEL Puntal DE OrificioChaflán Superficie Orientado DE Vidrio Conversión DEL Regulador DE Presión DEL ElectrodomésticoInstalación de los puntales de orificio de gas Natural Apariencia DE LA Llama EN Alto BajoReajuste LAS Válvulas Para Usar GAS Natural Encendido del quemador y reencendido automáticoRespecter Impérativement LES Dimensions DE LA Découpe Manuel DE Mise EN ServicePréparation du comptoir Emplacement de votre appareil Jenn-AirRéglages requis lors de la mise en service Suggestions de préparation importantesMaisons mobiles Roulottes de parcPose de l’appareil Raccordement de l’appareil au gaz Illustration D’UNE Conduite DE GAZBoîte DES Brûleurs Remarque concernant la ci-dessus Illustration D’UNE Méthode Alternative Vérification de la pressionCâblage électrique AvertissementRemplacer Tous LES Raccords À Orifice Conversion de l’appareil au gaz GPLPose DE Raccords ET DE Réducteurs DE Débit D’ORIFICE GPL Dépose DE L’ÉCROU À OrificeVUE Dans LE Trou DU Bouton Conversion DU Détendeur DE L’APPAREILApparence DE LA Flamme À Plein FEU ET À FEU Doux Pour convertir l’appareil au gaz naturelAllumage standard et allumage automatique des brûleurs Reconversion DES Commandes AU GAZ Naturel

JGC9536, JGC9430 specifications

The Jenn-Air JGC9536 and JGC9430 are two prominent models in the realm of premium gas cooktops, designed to elevate culinary experiences in the modern kitchen. Both models offer a range of advanced features and technologies that cater to the needs of chefs at all skill levels.

Starting with the JGC9536, this cooktop boasts a powerful 19,000 BTU burner, ideal for rapid boiling and high-heat searing. This feature is complemented by a versatile selection of burner sizes, including a 15,000 BTU dual-flame burner, which allows for precise temperature control. This burner is particularly advantageous for simmering sauces or slow-cooking delicate dishes. Additionally, the JGC9536 incorporates powerful 6,000 BTU burners that are excellent for everyday cooking tasks, providing a good balance between heat and efficiency.

The JGC9430, while slightly smaller, does not compromise on performance. It features a robust 16,000 BTU burner that provides ample power for a variety of cooking methods. Both models are equipped with continuous cast iron grates that allow for easy movement of pots and pans across the cooktop. This design not only enhances stability but also offers a professional look to the kitchen.

A notable technology integrated into both the JGC9536 and JGC9430 is the Precision Temperature Control. This feature provides consistent heat across the burners, ensuring food is cooked evenly. The high-performance ignition system is another highlight, allowing for quick and reliable burner lighting, which is essential for busy kitchen environments.

In terms of aesthetics, both models feature sleek stainless steel finishes and a sophisticated design that complements any kitchen décor. The illuminated knobs on the front provide not only a stylish touch but also practical visibility, making it easy to operate even in low-light conditions.

Safety features are also a focus for both cooktops. The flame-sensing technology automatically re-ignites the burner if the flame goes out, providing peace of mind while cooking. Additionally, the sealed burners minimize the risk of spills and allow for easy cleaning.

In summary, the Jenn-Air JGC9536 and JGC9430 gas cooktops are top-tier choices for those seeking to enhance their cooking experience. With powerful burners, advanced temperature control technologies, and a commitment to safety and aesthetics, these cooktops stand out as excellent investments for any kitchen. Whether for everyday cooking or culinary adventures, these models deliver exceptional performance and versatility.
Top Page Image Contents