Jenn-Air 8112P341-60 Before YOU Call for Service, Metal marks, Be sure ignitors are dry

Page 10

BEFORE YOU CALL FOR SERVICE

SURFACE BURNER FAILS TO LIGHT.

•Check to be sure plug is securely inserted into receptacle.

•Check or re-set circuit breaker. Check or replace fuse.

•Check power supply.

•Check to be sure burner is correctly rated for your kind of gas.

•Check to be sure burner ports or ignition ports are not clogged.

•Check to be sure ignitor is dry and clicking. Burner will not light if ignitor is damaged, soiled or wet. If ignitor doesn’t click, turn control knob OFF.

•Check to be sure burner cap is correctly seated on the burner base.

SURFACE BURNER FLAME LIFTS OFF PORTS.

•Check to be sure a pan is sitting on the grate above.

•Contact an authorized servicer.

THE FLAME IS UNEVEN.

•Burner ports may be clogged.

•Flame may need to be adjusted. Contact an authorized servicer.

SURFACE BURNER FLAME IS YELLOW IN COLOR.

•Contact an authorized servicer.

•Some yellow tips on the flame are acceptable when using LP gas.

GLASS-CERAMIC

SURFACE SHOWS WEAR.

1.Metal marks.

•Do not slide metal pans across top. When cool, clean with Cooktop Cleaning Creme. See pg. 8.

2.Brown streaks and specks.

•Spills were not removed promptly. Surface was wiped with soiled cloth or sponge.

3.Areas with a metallic sheen.

•Mineral deposits from water and food.

4.Pitting or flaking.

•Sugary boilovers that were not removed promptly. See pg. 8.

IGNITER CONTINUES TO CLICK.

• Be sure ignitors are dry.

9

Image 10

Contents User Installer Please leave this manual with this appliance Important Safety InstructionsSafety Instructions Always disconnect power to appliance before servicingTo Prevent Fire or Smoke Damage Child SafetyCooking Safety Case of FireGLASS-CERAMIC Cooktop Important Safety INSTRUCTIONS,Utensil Safety Never stand on the cooktopSave These Instructions for Future Reference Cleaning SafetyImportant Safety Electrical ConnectionUsing Your Cooktop Surface ControlsCooktop AT a Glance GLASS-CERAMIC Surface Using Your COOKTOP,Before first use, clean the cooktop. See Cleaning, Tips to Protect GLASS-CERAMIC SurfaceCare & Cleaning Metal marks Before YOU Call for ServiceBe sure ignitors are dry Page JENN-AIRCOOKING Appliance Warranty Guide Instructions DE Sécurité Importantes Installateur Remettre ce manuel au propriétairePour le service après-vente, voir Instructions DE SécuritéSécurité Pour LES Enfants EN CAS D’INCENDIEFamiliarisation Avec ’APPAREIL Surface DE Cuisson EN Vitrocéramique Instructions DE Sécurité IMPORTANTES, SuiteCuisson ET Sécurité Ustensiles ET SécuritéAvertissement ET Avis Important Pour LA Sécurité Conserver CES Instructions Pour Consultation UltérieureRaccordement Électrique Cuisson SUR LA Surface Brûleur DE Haute Performance Surface DE CuissonBrûleurs Scellés Brûleurs DE MijotageSurface DE Cuisson EN Vitrocéramique Cuisson SUR LA SURFACE, SuiteConseils DE Protection DE LA Surface EN Vitrocéramique Nettoyage ET Entretien Marques de métal Avant DE Contacter UN RéparateurOrifices du brûleur obstrués Petites marques et traces marronRemarques Garantie DES Appareils DE Cuisson JENN-AIR Guía Instrucciones Importantes Sobre Seguridad Instrucciones DE SeguridadSeguridad Para LOS Niños Para Evitar UN Incendio O Daño Causado POR EL HumoEN Caso DE Incendio GeneralidadesCubierta DE Vidrio Cerámico Instrucciones Importantes Sobre SEGURIDAD,Seguridad Para Cocinar Utensilios ApropiadosAviso Y Advertencia Importante Sobre Seguridad Conserve Estas Instrucciones Para Referencia FuturaConexión Eléctrica Perillas DE LOS Controles Superiores Cocinando EN LA CubiertaControles Superiores Encendido SIN PilotoQuemador DE Alto Rendimiento Vista General DE LA CubiertaQuemadores Sellados Rejillas DE LOS QuemadoresCocinando EN LA CUBIERTA, Superficie DE Vidrio CerámicaCuidado Y Limpieza Antes DE Solicitar Servicio Vetas y manchas marronesNotas Garantía DE LOS Aparatos DE Cocción DE JENN-AIR